| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d223a58a-8a4b-b745-c8c9-2e19d4742cdb@linux.intel.com>
Date: Thu, 14 Mar 2024 13:27:36 +0200 (EET)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Pengfei Xu <pengfei.xu@...el.com>
cc: "Maciej W. Rozycki" <macro@...am.me.uk>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
linux-pci@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] PCI: Correct error reporting with PCIe failed link
retraining
On Thu, 14 Mar 2024, Pengfei Xu wrote:
> Hi Maciej W. Rozycki,
>
> Greeting!
>
> We tested intel internal Linux next kernel by syzkaller fuzz testing and met
> "CPU soft lockup in __run_timers" problem in guest.
>
> Bisect and find that the following patch is the first bad commit.
Hi,
I'm skeptical of this bisect result (perhaps some of the kernels marked
good are actually bad because the problem does not always trigger?).
Did you check what is the result if you put that patch on top of 6.8?
--
i.
> Check the commit content is same as following patch.
>
> All detailed info: https://github.com/xupengfe/syzkaller_logs/tree/main/240313_174939___run_timers
> Syzkaller reproduced code: https://github.com/xupengfe/syzkaller_logs/blob/main/240313_174939___run_timers/repro.c
> Syzkaller reproduced steps: https://github.com/xupengfe/syzkaller_logs/blob/main/240313_174939___run_timers/repro.prog
> Bisect info: https://github.com/xupengfe/syzkaller_logs/blob/main/240313_174939___run_timers/bisect_info.log
> Issue dmesg: https://github.com/xupengfe/syzkaller_logs/blob/main/240313_174939___run_timers/0a53950322bc80aeebf56f5a9d38c847186a082a_dmesg.log
> bzImage: https://github.com/xupengfe/syzkaller_logs/raw/main/240313_174939___run_timers/bzImage_v6.8_problem.tar.gz
>
> "
> [ 34.599994] hrtimer: interrupt took 63789 ns
> [ 102.443957] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 3343956725 wd_nsec: 3343956627
> [ 393.043326] watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [repro:2653]
> [ 393.043704] Modules linked in:
> [ 393.043856] irq event stamp: 17486443
> [ 393.044019] hardirqs last enabled at (17486442): [<ffffffff855b0ebe>] irqentry_exit+0x3e/0xa0
> [ 393.044462] hardirqs last disabled at (17486443): [<ffffffff855aed94>] sysvec_apic_timer_interrupt+0x14/0xc0
> [ 393.044925] softirqs last enabled at (14336234): [<ffffffff8126c828>] __irq_exit_rcu+0xa8/0x110
> [ 393.045332] softirqs last disabled at (14336237): [<ffffffff8126c828>] __irq_exit_rcu+0xa8/0x110
> [ 393.045740] CPU: 1 PID: 2653 Comm: repro Not tainted 6.8.0-0a53950322bc+ #1
> [ 393.046062] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
> [ 393.046618] RIP: 0010:preempt_count_sub+0x6c/0x160
> [ 393.046856] Code: ed 07 85 c9 75 1b 65 8b 05 d9 7b d2 7e 89 c2 81 e2 ff ff ff 7f 39 da 7c 1b 81 fb fe 00 00 00 76 6b f7 db 65 01 1d bc 7b d2 7e <48> 8b 5d f8 c9 c3 cc cc cc cc e8 d5 36 9d 01 85 c0 74 ed 48 c7 c0
> [ 393.047696] RSP: 0018:ffff88806cd09da0 EFLAGS: 00000213
> [ 393.047950] RAX: 0000000000000102 RBX: 00000000ffffffff RCX: 0000000000000000
> [ 393.048281] RDX: 0000000000000102 RSI: 0000000000000102 RDI: 0000000000000001
> [ 393.048611] RBP: ffff88806cd09da8 R08: 0000000000000001 R09: fffffbfff11caa46
> [ 393.048943] R10: ffffffff88e55237 R11: 0000000000000001 R12: ffff88806cd32a00
> [ 393.049277] R13: ffffffff81516e90 R14: dffffc0000000000 R15: ffff88806cd32a00
> [ 393.049611] FS: 0000000000000000(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000
> [ 393.049987] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 393.050261] CR2: 00007febf5bfa838 CR3: 000000000bda4006 CR4: 0000000000770ef0
> [ 393.050596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 393.050928] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
> [ 393.051262] PKRU: 55555554
> [ 393.051396] Call Trace:
> [ 393.051521] <IRQ>
> [ 393.051630] ? show_regs+0xa9/0xc0
> [ 393.051805] ? watchdog_timer_fn+0x531/0x6b0
> [ 393.052019] ? __pfx_watchdog_timer_fn+0x10/0x10
> [ 393.052255] ? __hrtimer_run_queues+0x1a4/0xc00
> [ 393.052505] ? __pfx___hrtimer_run_queues+0x10/0x10
> [ 393.052770] ? hrtimer_interrupt+0x324/0x7a0
> [ 393.052994] ? __sysvec_apic_timer_interrupt+0x105/0x3c0
> [ 393.053254] ? sysvec_apic_timer_interrupt+0x4b/0xc0
> [ 393.053495] ? asm_sysvec_apic_timer_interrupt+0x1f/0x30
> [ 393.053757] ? __pfx_clocksource_watchdog+0x10/0x10
> [ 393.054002] ? preempt_count_sub+0x6c/0x160
> [ 393.054213] _raw_spin_unlock_irq+0x3c/0x60
> [ 393.054423] __run_timers.part.0+0x6c9/0xa40
> [ 393.054647] ? __pfx___run_timers.part.0+0x10/0x10
> [ 393.054883] ? sysvec_irq_work+0x8b/0x100
> [ 393.055087] ? asm_sysvec_irq_work+0x1f/0x30
> [ 393.055314] run_timer_softirq+0xbc/0x1c0
> [ 393.055517] __do_softirq+0x1cb/0x84a
> [ 393.055709] __irq_exit_rcu+0xa8/0x110
> [ 393.055899] irq_exit_rcu+0x12/0x30
> [ 393.056078] sysvec_apic_timer_interrupt+0xa5/0xc0
> [ 393.056314] </IRQ>
> [ 393.056422] <TASK>
> [ 393.056532] asm_sysvec_apic_timer_interrupt+0x1f/0x30
> [ 393.056781] RIP: 0010:__schedule+0xbe/0x30c0
> [ 393.056993] Code: c0 e8 e6 a8 fd ff 48 98 48 8d 3c c5 a0 dc 75 86 48 89 fa 48 c1 ea 03 42 80 3c 2a 00 0f 85 81 28 00 00 4c 03 24 c5 a0 dc 75 86 <49> 8d 84 24 58 0a 00 00 48 89 c2 48 89 85 e0 fe ff ff 48 b8 00 00
> [ 393.057847] RSP: 0018:ffff888024f3f6e8 EFLAGS: 00000282
> [ 393.058101] RAX: 0000000000000001 RBX: 0000000000046380 RCX: 0000000000000001
> [ 393.058437] RDX: 1ffffffff0cebb95 RSI: 0000000000000001 RDI: ffffffff8675dca8
> [ 393.058771] RBP: ffff888024f3f820 R08: 0000000000000001 R09: 0000000000000002
> [ 393.059107] R10: 0000000000406000 R11: 0000000000000001 R12: ffff88806cd46380
> [ 393.059442] R13: dffffc0000000000 R14: ffffffff855da674 R15: 0000000000406000
> [ 393.059779] ? __cond_resched+0x24/0x30
> [ 393.059982] ? __schedule+0x9a/0x30c0
> [ 393.060173] ? lockdep_hardirqs_on+0x8a/0x110
> [ 393.060408] ? trace_hardirqs_on+0x26/0x120
> [ 393.060637] ? __pfx___schedule+0x10/0x10
> [ 393.060836] ? __this_cpu_preempt_check+0x21/0x30
> [ 393.061068] ? lock_release+0x417/0x7e0
> [ 393.061267] ? __this_cpu_preempt_check+0x21/0x30
> [ 393.061497] ? lock_is_held_type+0xf0/0x150
> [ 393.061705] ? __cond_resched+0x24/0x30
> [ 393.061895] preempt_schedule_common+0x4a/0xd0
> [ 393.062118] __cond_resched+0x24/0x30
> [ 393.062302] unmap_page_range+0xab4/0x3690
> [ 393.062530] ? __pfx_unmap_page_range+0x10/0x10
> [ 393.062752] ? __this_cpu_preempt_check+0x21/0x30
> [ 393.062989] ? uprobe_munmap+0xb0/0x590
> [ 393.063186] unmap_single_vma+0x1ac/0x2d0
> [ 393.063390] unmap_vmas+0x210/0x470
> [ 393.063572] ? __pfx_unmap_vmas+0x10/0x10
> [ 393.063769] ? __pfx_lock_release+0x10/0x10
> [ 393.063977] ? lock_release+0x417/0x7e0
> [ 393.064167] ? __pfx_folio_batch_move_lru+0x10/0x10
> [ 393.064410] ? __pfx_lock_release+0x10/0x10
> [ 393.064624] ? mlock_drain_local+0x281/0x4b0
> [ 393.064844] exit_mmap+0x19b/0xac0
> [ 393.065018] ? mark_lock.part.0+0xf3/0x17a0
> [ 393.065233] ? __pfx_exit_mmap+0x10/0x10
> [ 393.065427] ? __kasan_check_write+0x18/0x20
> [ 393.065644] ? __pfx___mutex_unlock_slowpath+0x10/0x10
> [ 393.065909] ? mutex_unlock+0x16/0x20
> [ 393.066096] __mmput+0xde/0x3e0
> [ 393.066256] mmput+0x74/0x90
> [ 393.066407] do_exit+0xa59/0x28c0
> [ 393.066580] ? lock_release+0x417/0x7e0
> [ 393.066778] ? __pfx_lock_release+0x10/0x10
> [ 393.066989] ? __pfx_do_exit+0x10/0x10
> [ 393.067179] ? __this_cpu_preempt_check+0x21/0x30
> [ 393.067410] ? _raw_spin_unlock_irq+0x2c/0x60
> [ 393.067630] ? lockdep_hardirqs_on+0x8a/0x110
> [ 393.067845] ? _raw_spin_unlock_irq+0x2c/0x60
> [ 393.068064] ? trace_hardirqs_on+0x26/0x120
> [ 393.068287] do_group_exit+0xe5/0x2c0
> [ 393.068489] __x64_sys_exit_group+0x4d/0x60
> [ 393.068707] do_syscall_64+0x73/0x150
> [ 393.068894] entry_SYSCALL_64_after_hwframe+0x6e/0x76
> [ 393.069140] RIP: 0033:0x7febf5b18a4d
> [ 393.069319] Code: Unable to access opcode bytes at 0x7febf5b18a23.
> "
>
> ---
>
> If you don't need the following environment to reproduce the problem or if you
> already have one reproduced environment, please ignore the following information.
>
> How to reproduce:
> git clone https://gitlab.com/xupengfe/repro_vm_env.git
> cd repro_vm_env
> tar -xvf repro_vm_env.tar.gz
> cd repro_vm_env; ./start3.sh // it needs qemu-system-x86_64 and I used v7.1.0
> // start3.sh will load bzImage_2241ab53cbb5cdb08a6b2d4688feb13971058f65 v6.2-rc5 kernel
> // You could change the bzImage_xxx as you want
> // Maybe you need to remove line "-drive if=pflash,format=raw,readonly=on,file=./OVMF_CODE.fd \" for different qemu version
> You could use below command to log in, there is no password for root.
> ssh -p 10023 root@...alhost
>
> After login vm(virtual machine) successfully, you could transfer reproduced
> binary to the vm by below way, and reproduce the problem in vm:
> gcc -pthread -o repro repro.c
> scp -P 10023 repro root@...alhost:/root/
>
> Get the bzImage for target kernel:
> Please use target kconfig and copy it to kernel_src/.config
> make olddefconfig
> make -jx bzImage //x should equal or less than cpu num your pc has
>
> Fill the bzImage file into above start3.sh to load the target kernel in vm.
>
>
> Tips:
> If you already have qemu-system-x86_64, please ignore below info.
> If you want to install qemu v7.1.0 version:
> git clone https://github.com/qemu/qemu.git
> cd qemu
> git checkout -f v7.1.0
> mkdir build
> cd build
> yum install -y ninja-build.x86_64
> yum -y install libslirp-devel.x86_64
> ../configure --target-list=x86_64-softmmu --enable-kvm --enable-vnc --enable-gtk --enable-sdl --enable-usb-redir --enable-slirp
> make
> make install
> ---
>
> Best Regards,
> Thanks!
>
> On 2024-02-10 at 01:43:50 +0000, Maciej W. Rozycki wrote:
> > Only return successful completion status from `pcie_failed_link_retrain'
> > if retraining has actually been done, preventing excessive delays from
> > being triggered at call sites in a hope that communication will finally
> > be established with the downstream device where in fact nothing has been
> > done about the link in question that would justify such a hope.
> >
> > Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
> > Reported-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> > Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
> > Signed-off-by: Maciej W. Rozycki <macro@...am.me.uk>
> > Cc: stable@...r.kernel.org # v6.5+
> > ---
> > drivers/pci/quirks.c | 18 +++++++++++-------
> > 1 file changed, 11 insertions(+), 7 deletions(-)
> >
> > linux-pcie-failed-link-retrain-status-fix.diff
> > Index: linux-macro/drivers/pci/quirks.c
> > ===================================================================
> > --- linux-macro.orig/drivers/pci/quirks.c
> > +++ linux-macro/drivers/pci/quirks.c
> > @@ -74,7 +74,8 @@
> > * firmware may have already arranged and lift it with ports that already
> > * report their data link being up.
> > *
> > - * Return TRUE if the link has been successfully retrained, otherwise FALSE.
> > + * Return TRUE if the link has been successfully retrained, otherwise FALSE,
> > + * also when retraining was not needed in the first place.
> > */
> > bool pcie_failed_link_retrain(struct pci_dev *dev)
> > {
> > @@ -83,10 +84,11 @@ bool pcie_failed_link_retrain(struct pci
> > {}
> > };
> > u16 lnksta, lnkctl2;
> > + bool ret = false;
> >
> > if (!pci_is_pcie(dev) || !pcie_downstream_port(dev) ||
> > !pcie_cap_has_lnkctl2(dev) || !dev->link_active_reporting)
> > - return false;
> > + return ret;
> >
> > pcie_capability_read_word(dev, PCI_EXP_LNKCTL2, &lnkctl2);
> > pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
> > @@ -98,9 +100,10 @@ bool pcie_failed_link_retrain(struct pci
> > lnkctl2 |= PCI_EXP_LNKCTL2_TLS_2_5GT;
> > pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2);
> >
> > - if (pcie_retrain_link(dev, false)) {
> > + ret = pcie_retrain_link(dev, false) == 0;
> > + if (!ret) {
> > pci_info(dev, "retraining failed\n");
> > - return false;
> > + return ret;
> > }
> >
> > pcie_capability_read_word(dev, PCI_EXP_LNKSTA, &lnksta);
> > @@ -117,13 +120,14 @@ bool pcie_failed_link_retrain(struct pci
> > lnkctl2 |= lnkcap & PCI_EXP_LNKCAP_SLS;
> > pcie_capability_write_word(dev, PCI_EXP_LNKCTL2, lnkctl2);
> >
> > - if (pcie_retrain_link(dev, false)) {
> > + ret = pcie_retrain_link(dev, false) == 0;
> > + if (!ret) {
> > pci_info(dev, "retraining failed\n");
> > - return false;
> > + return ret;
> > }
> > }
> >
> > - return true;
> > + return ret;
> > }
> >
> > static ktime_t fixup_debug_start(struct pci_dev *dev,
Powered by blists - more mailing lists