| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 14 Mar 2024 21:09:32 +0800
From: Heng Qi <hengqi@...ux.alibaba.com>
To: "David S. Miller" <davem@...emloft.net>,
Tal Gilboa <talgi@...dia.com>,
Eric Dumazet <edumazet@...gle.com>,
Paolo Abeni <pabeni@...hat.com>,
Jakub Kicinski <kuba@...nel.org>,
Jason Wang <jasowang@...hat.com>,
"Michael S. Tsirkin" <mst@...hat.com>,
Xuan Zhuo <xuanzhuo@...ux.alibaba.com>,
Jonathan Corbet <corbet@....net>,
Randy Dunlap <rdunlap@...radead.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Breno Leitao <leitao@...ian.org>,
Johannes Berg <johannes.berg@...el.com>,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
virtualization@...ts.linux.dev
Subject: [RFC PATCH 1/2] net: add sysfs attributes for customized dim profile management
The NetDIM library, currently leveraged by an array of NICs, delivers
excellent acceleration benefits. Nevertheless, NICs vary significantly
in their dim profile list prerequisites.
Specifically, virtio-net backends may present diverse sw or hw device
implementation, making a one-size-fits-all parameter list impractical.
On Alibaba Cloud, the virtio DPU's performance under the default DIM
profile falls short of expectations, partly due to a mismatch in
parameter configuration.
I also noticed that ice/idpf/ena and other NICs have customized
profilelist or placed some restrictions on dim capabilities.
Motivated by this, I tried adding new sysfs attributes that provides
a per-device control to modify and access a device's interrupt parameters.
Usage
========
1. Query the currently customized list of the device
$ cat dim_profs
The profiles of (RX, EQE):
{.usec = 1, .pkts = 256, .comps = 0,},
{.usec = 8, .pkts = 256, .comps = 0,},
{.usec = 64, .pkts = 256, .comps = 0,},
{.usec = 128, .pkts = 256, .comps = 0,},
{.usec = 256, .pkts = 256, .comps = 0,}
The profiles of (TX, EQE):
{.usec = 1, .pkts = 256, .comps = 0,},
{.usec = 2, .pkts = 256, .comps = 0,},
{.usec = 3, .pkts = 256, .comps = 0,},
{.usec = 4, .pkts = 256, .comps = 0,},
{.usec = 5, .pkts = 256, .comps = 0,}
2. Tune
$ echo "RX EQE 8,8,0 16,16,0 32,32,0 64,64,0 128,128,0" > dim_profs
$ echo " TX EQE 0,2,0 1,3,0 2,4,0 3,5,0 4,6,0 " > dim_profs
$ cat dim_profs
The profiles of (RX, EQE):
{.usec = 8, .pkts = 8, .comps = 0,},
{.usec = 16, .pkts = 16, .comps = 0,},
{.usec = 32, .pkts = 32, .comps = 0,},
{.usec = 64, .pkts = 64, .comps = 0,},
{.usec = 128, .pkts = 128, .comps = 0,}
The profiles of (TX, EQE):
{.usec = 0, .pkts = 2, .comps = 0,},
{.usec = 1, .pkts = 3, .comps = 0,},
{.usec = 2, .pkts = 4, .comps = 0,},
{.usec = 3, .pkts = 5, .comps = 0,},
{.usec = 4, .pkts = 6, .comps = 0,}
3. Warn
If the device does not support .ndo_dim_moder_{set, get},
the following warning will response:
"Profile is default and not customized by the device."
Signed-off-by: Heng Qi <hengqi@...ux.alibaba.com>
---
Documentation/ABI/testing/sysfs-class-net | 17 +++
include/linux/dim.h | 7 ++
include/linux/netdevice.h | 35 ++++++
lib/dim/net_dim.c | 6 --
net/core/net-sysfs.c | 172 ++++++++++++++++++++++++++++++
5 files changed, 231 insertions(+), 6 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index ebf21be..1e4faa8 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -352,3 +352,20 @@ Description:
0 threaded mode disabled for this dev
1 threaded mode enabled for this dev
== ==================================
+
+What: /sys/class/net/<iface>/dim_profs
+Date: Mar 2024
+KernelVersion: 6.8
+Contact: netdev@...r.kernel.org
+Description:
+ String value to control the profile list of DIM per device. User could
+ set this value to tune the profile list for RX/TX direction and EQE/CQE
+ mode respectively.
+
+ Possible values:
+ ================================================ ==========================
+ RX EQE 1,1,0 2,2,0 3,3,0 4,4,0 5,5,0 tune RX + EQE profile list
+ RX CQE 8,8,0 16,16,0 32,32,0 64,64,0 128,128,0 tune RX + CQE profile list
+ TX EQE 16,8,0 2,16,0 16,8,0 32,64,0 128,64,0 tune TX + EQE profile list
+ TX CQE 8,5,0 8,16,0 32,12,0 128,64,0 256,128,0 tune TX + CQE profile list
+ ================================================ ==========================
diff --git a/include/linux/dim.h b/include/linux/dim.h
index f343bc9..43398f5 100644
--- a/include/linux/dim.h
+++ b/include/linux/dim.h
@@ -10,6 +10,13 @@
#include <linux/types.h>
#include <linux/workqueue.h>
+/* Number of DIM profiles and period mode. */
+#define NET_DIM_PARAMS_NUM_PROFILES 5
+#define NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE 256
+#define NET_DIM_DEFAULT_TX_CQ_PKTS_FROM_EQE 128
+#define NET_DIM_DEF_PROFILE_CQE 1
+#define NET_DIM_DEF_PROFILE_EQE 1
+
/*
* Number of events between DIM iterations.
* Causes a moderation of the algorithm run.
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index c6f6ac7..bc2f3ac 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -49,6 +49,7 @@
#include <uapi/linux/netdev.h>
#include <linux/hashtable.h>
#include <linux/rbtree.h>
+#include <linux/dim.h>
#include <net/net_trackers.h>
#include <net/net_debug.h>
#include <net/dropreason-core.h>
@@ -998,6 +999,27 @@ struct netdev_net_notifier {
struct notifier_block *nb;
};
+enum dim_direction {
+ DIM_RX_DIRECTION = 0x0,
+ DIM_TX_DIRECTION = 0x1,
+ DIM_NUM_DIRECTIONS
+};
+/**
+ * struct dim_profs_list - Structure for dim sysfs configuration.
+ * Used to exchange profile list between the sysfs and the driver.
+ *
+ * @direction: RX or TX dim information
+ * @mode: CQ period count mode (from CQE/EQE)
+ * @num: the number of profs array
+ * @profs: dim profile list
+ */
+struct dim_profs_list {
+ u8 direction;
+ u8 mode;
+ u8 num;
+ struct dim_cq_moder profs[];
+};
+
/*
* This structure defines the management hooks for network devices.
* The following hooks can be defined; unless noted otherwise, they are
@@ -1351,6 +1373,14 @@ struct netdev_net_notifier {
* struct kernel_hwtstamp_config *kernel_config,
* struct netlink_ext_ack *extack);
* Change the hardware timestamping parameters for NIC device.
+ *
+ * int (*ndo_dim_moder_get)(struct net_device *dev,
+ * struct dim_profs_list *list);
+ * Get dim profiles list from the NIC device.
+ *
+ * int (*ndo_dim_moder_set)(struct net_device *dev,
+ * struct dim_profs_list *list);
+ * Configure dim profiles list for the NIC device.
*/
struct net_device_ops {
int (*ndo_init)(struct net_device *dev);
@@ -1595,6 +1625,11 @@ struct net_device_ops {
int (*ndo_hwtstamp_set)(struct net_device *dev,
struct kernel_hwtstamp_config *kernel_config,
struct netlink_ext_ack *extack);
+ int (*ndo_dim_moder_get)(struct net_device *dev,
+ struct dim_profs_list *list);
+
+ int (*ndo_dim_moder_set)(struct net_device *dev,
+ struct dim_profs_list *list);
};
/**
diff --git a/lib/dim/net_dim.c b/lib/dim/net_dim.c
index 4e32f7a..67d5beb 100644
--- a/lib/dim/net_dim.c
+++ b/lib/dim/net_dim.c
@@ -11,12 +11,6 @@
* There are different set of profiles for RX/TX CQs.
* Each profile size must be of NET_DIM_PARAMS_NUM_PROFILES
*/
-#define NET_DIM_PARAMS_NUM_PROFILES 5
-#define NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE 256
-#define NET_DIM_DEFAULT_TX_CQ_PKTS_FROM_EQE 128
-#define NET_DIM_DEF_PROFILE_CQE 1
-#define NET_DIM_DEF_PROFILE_EQE 1
-
#define NET_DIM_RX_EQE_PROFILES { \
{.usec = 1, .pkts = NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE,}, \
{.usec = 8, .pkts = NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE,}, \
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index e3d7a8c..801cb07 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -23,6 +23,7 @@
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/cpu.h>
+#include <linux/dim.h>
#include <net/netdev_rx_queue.h>
#include <net/rps.h>
@@ -638,6 +639,176 @@ static ssize_t threaded_store(struct device *dev,
}
static DEVICE_ATTR_RW(threaded);
+static struct dim_profs_list *parse_dim_profs(const char *buf, ssize_t len)
+{
+ int i, ret, size, totlen = 0, retlen = 0;
+ char direction[3], period_mode[4];
+ struct dim_profs_list *list;
+
+ size = sizeof(*list) + NET_DIM_PARAMS_NUM_PROFILES * sizeof(struct dim_cq_moder);
+ list = kzalloc(size, GFP_KERNEL);
+ if (!list)
+ goto err_list;
+
+ list->num = NET_DIM_PARAMS_NUM_PROFILES;
+
+ ret = sscanf(buf, "%2s %3s%n", direction, period_mode, &retlen);
+ if (ret != 2)
+ goto err_parse;
+
+ if (!strcasecmp(direction, "RX"))
+ list->direction = DIM_RX_DIRECTION;
+ else if (!strcasecmp(direction, "TX"))
+ list->direction = DIM_TX_DIRECTION;
+ else
+ goto err_parse;
+
+ if (!strcasecmp(period_mode, "EQE"))
+ list->mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
+ else if (!strcasecmp(period_mode, "CQE"))
+ list->mode = DIM_CQ_PERIOD_MODE_START_FROM_CQE;
+ else
+ goto err_parse;
+
+ totlen += retlen;
+ if (totlen > len)
+ goto err_parse;
+
+ buf += retlen;
+ if (!buf)
+ goto err_parse;
+
+ for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) {
+ ret = sscanf(buf, "%hu,%hu,%hu%n", &list->profs[i].usec,
+ &list->profs[i].pkts, &list->profs[i].comps, &retlen);
+ if (ret != 3)
+ goto err_parse;
+
+ totlen += retlen;
+ if (totlen > len)
+ goto err_parse;
+
+ buf += retlen;
+ if (i == NET_DIM_PARAMS_NUM_PROFILES - 1)
+ break;
+ }
+
+ return list;
+
+err_parse:
+ kfree(list);
+err_list:
+ return NULL;
+}
+
+static ssize_t dim_profs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct net_device *netdev = to_net_dev(dev);
+ const struct net_device_ops *ops = netdev->netdev_ops;
+ struct net *net = dev_net(netdev);
+ struct dim_profs_list *list;
+ int ret = 0;
+
+ if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
+ return -EPERM;
+
+ list = parse_dim_profs(buf, len);
+ if (!list)
+ return -EINVAL;
+
+ if (!rtnl_trylock())
+ return restart_syscall();
+
+ if (dev_isalive(netdev)) {
+ if (!ops->ndo_dim_moder_set)
+ ret = -EINVAL;
+ else
+ ret = ops->ndo_dim_moder_set(netdev, list) ? : len;
+ }
+
+ kfree(list);
+ rtnl_unlock();
+
+ return ret;
+}
+
+static ssize_t dim_profs_show_one(struct device *dev,
+ struct device_attribute *attr,
+ char *buf, u8 direct, u8 mode,
+ size_t *len_)
+{
+ static const char fmt_body[] = "{.usec = %3hu, .pkts = %3hu, .comps = %3hu,}%s";
+ static const char fmt_hdr[] = "The profiles of (%2s, %3s):\n";
+ const char *direction[2] = {"RX", "TX"}, *period_mode[2] = {"EQE", "CQE"};
+ struct net_device *netdev = to_net_dev(dev);
+ const struct net_device_ops *ops = netdev->netdev_ops;
+ struct dim_profs_list *list;
+ size_t size, len = *len_;
+ ssize_t i;
+
+ size = sizeof(*list) + NET_DIM_PARAMS_NUM_PROFILES * sizeof(struct dim_cq_moder);
+ list = kzalloc(size, GFP_KERNEL);
+ if (!list)
+ return -ENOMEM;
+
+ list->num = NET_DIM_PARAMS_NUM_PROFILES;
+ list->direction = direct;
+ list->mode = mode;
+ if (ops->ndo_dim_moder_get(netdev, list))
+ goto ret_;
+
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ fmt_hdr, direction[direct], period_mode[mode]);
+ for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) {
+ len += scnprintf(buf + len, PAGE_SIZE - len, fmt_body,
+ list->profs[i].usec, list->profs[i].pkts,
+ list->profs[i].comps,
+ (i == NET_DIM_PARAMS_NUM_PROFILES - 1) ? "\n" : ",\n");
+ }
+ *len_ = len;
+ret_:
+ kfree(list);
+ return 0;
+}
+
+static ssize_t dim_profs_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ static const char out[] = "profile is default and not customized by the device.";
+ struct net_device *netdev = to_net_dev(dev);
+ const struct net_device_ops *ops = netdev->netdev_ops;
+ ssize_t i, j, ret = 0;
+ size_t len = 0;
+
+ if (!rtnl_trylock())
+ return restart_syscall();
+
+ if (!ops->ndo_dim_moder_get) {
+ ret = sysfs_emit(buf, "%s\n", out);
+ goto ret_;
+ }
+
+ for (i = 0; i < DIM_NUM_DIRECTIONS; i++) {
+ for (j = 0; j < DIM_CQ_PERIOD_NUM_MODES; j++) {
+ ret = dim_profs_show_one(dev, attr, buf, i, j, &len);
+ if (ret)
+ goto ret_;
+ }
+ }
+
+ rtnl_unlock();
+ return len;
+
+ret_:
+ rtnl_unlock();
+ return ret;
+}
+
+static DEVICE_ATTR_RW(dim_profs);
+
static struct attribute *net_class_attrs[] __ro_after_init = {
&dev_attr_netdev_group.attr,
&dev_attr_type.attr,
@@ -671,6 +842,7 @@ static ssize_t threaded_store(struct device *dev,
&dev_attr_carrier_up_count.attr,
&dev_attr_carrier_down_count.attr,
&dev_attr_threaded.attr,
+ &dev_attr_dim_profs.attr,
NULL,
};
ATTRIBUTE_GROUPS(net_class);
--
1.8.3.1
Powered by blists - more mailing lists