[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <257fa47f-f1de-49ec-9ebf-c33d4de736e1@roeck-us.net>
Date: Thu, 14 Mar 2024 06:50:27 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Peter Yin <peteryin.openbmc@...il.com>, patrick@...cx.xyz,
Wim Van Sebroeck <wim@...ux-watchdog.org>, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
linux-watchdog@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1] drivers: watchdog: ast2600 support bootstatus
On 3/13/24 23:57, Peter Yin wrote:
> Add WDIOF_EXTERN1 bootstatus in ast2600
>
This does a bit more than that because it replaces
WDIOF_CARDRESET with WDIOF_EXTERN1 for ast2600.
> Signed-off-by: Peter Yin <peteryin.openbmc@...il.com>
> ---
> Change log:
>
> v1
> - Patch 0001 - Add WDIOF_EXTERN1 bootstatus
> ---
> drivers/watchdog/aspeed_wdt.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
> index b4773a6aaf8c..8adadd394be6 100644
> --- a/drivers/watchdog/aspeed_wdt.c
> +++ b/drivers/watchdog/aspeed_wdt.c
> @@ -81,6 +81,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
> #define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION BIT(0)
> #define WDT_RESET_MASK1 0x1c
> #define WDT_RESET_MASK2 0x20
> +#define WDT_EVENT_COUNTER_MASK (0xFFF << 8)
>
> /*
> * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
> @@ -459,8 +460,17 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> }
>
> status = readl(wdt->base + WDT_TIMEOUT_STATUS);/BOOT_SECON
> - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) {
> - wdt->wdd.bootstatus = WDIOF_CARDRESET;
> +
> + if (of_device_is_compatible(np, "aspeed,ast2600-wdt")) {
> + if (status & WDT_EVENT_COUNTER_MASK) {
> + /*
> + * Reset cause by WatchDog
> + */
> + wdt->wdd.bootstatus |= WDIOF_EXTERN1;
> + }
> + } else {
> + if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY)
> + wdt->wdd.bootstatus = WDIOF_CARDRESET;
>
> if (of_device_is_compatible(np, "aspeed,ast2400-wdt") ||
> of_device_is_compatible(np, "aspeed,ast2500-wdt"))
This check is now unnecessary since it matches the else case.
Either case, it needs to be explained why WDIOF_CARDRESET ("Card previously
reset the CPU") is replaced by WDIOF_EXTERN1 ("External relay 1") for ast2600,
and why WDT_TIMEOUT_STATUS_BOOT_SECONDARY does not apply for ast2600 but
(status & WDT_EVENT_COUNTER_MASK) does.
Guenter
Powered by blists - more mailing lists