| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 15 Mar 2024 13:51:55 +0200 (EET)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Armin Wolf <W_Armin@....de>, Ai Chao <aichao@...inos.cn>
cc: Hans de Goede <hdegoede@...hat.com>, LKML <linux-kernel@...r.kernel.org>,
platform-driver-x86@...r.kernel.org
Subject: Re: [PATCH v8] platform/x86: add lenovo wmi camera button driver
On Thu, 14 Mar 2024, Armin Wolf wrote:
> Am 14.03.24 um 06:03 schrieb Ai Chao:
>
> > Add lenovo generic wmi driver to support camera button.
> > The Camera button is a GPIO device. This driver receives ACPI notifyi
> > when the camera button is switched on/off. This driver is used in
> > Lenovo A70, it is a Computer integrated machine.
> >
> > Signed-off-by: Ai Chao <aichao@...inos.cn>
> > ---
> > v8: Dev_deb convert to dev_err.
> > v7: Add dev_dbg and remove unused dev in struct.
> > v6: Modify SW_CAMERA_LENS_COVER to
> > KEY_CAMERA_ACCESS_ENABLE/KEY_CAMERA_ACCESS_DISABLE.
> > v5: Remove camera button groups, modify KEY_CAMERA to SW_CAMERA_LENS_COVER.
> > v4: Remove lenovo_wmi_input_setup, move camera_mode into struct
> > lenovo_wmi_priv.
> > v3: Remove lenovo_wmi_remove function.
> > v2: Adjust GPL v2 to GPL, adjust sprintf to sysfs_emit.
> >
> > drivers/platform/x86/Kconfig | 12 +++
> > drivers/platform/x86/Makefile | 1 +
> > drivers/platform/x86/lenovo-wmi-camera.c | 108 +++++++++++++++++++++++
> > 3 files changed, 121 insertions(+)
> > create mode 100644 drivers/platform/x86/lenovo-wmi-camera.c
> >
> > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> > index bdd302274b9a..9506a455b547 100644
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -1001,6 +1001,18 @@ config INSPUR_PLATFORM_PROFILE
> > To compile this driver as a module, choose M here: the module
> > will be called inspur-platform-profile.
> >
> > +config LENOVO_WMI_CAMERA
> > + tristate "Lenovo WMI Camera Button driver"
> > + depends on ACPI_WMI
> > + depends on INPUT
> > + help
> > + This driver provides support for Lenovo camera button. The Camera
> > + button is a GPIO device. This driver receives ACPI notify when the
> > + camera button is switched on/off.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called lenovo-wmi-camera.
> > +
> > source "drivers/platform/x86/x86-android-tablets/Kconfig"
> >
> > config FW_ATTR_CLASS
> > diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> > index 1de432e8861e..217e94d7c877 100644
> > --- a/drivers/platform/x86/Makefile
> > +++ b/drivers/platform/x86/Makefile
> > @@ -66,6 +66,7 @@ obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
> > obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
> > obj-$(CONFIG_THINKPAD_LMI) += think-lmi.o
> > obj-$(CONFIG_YOGABOOK) += lenovo-yogabook.o
> > +obj-$(CONFIG_LENOVO_WMI_CAMERA) += lenovo-wmi-camera.o
> >
> > # Intel
> > obj-y += intel/
> > diff --git a/drivers/platform/x86/lenovo-wmi-camera.c
> > b/drivers/platform/x86/lenovo-wmi-camera.c
> > new file mode 100644
> > index 000000000000..f83e3ccd9189
> > --- /dev/null
> > +++ b/drivers/platform/x86/lenovo-wmi-camera.c
> > @@ -0,0 +1,108 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Lenovo WMI Camera Button Driver
> > + *
> > + * Author: Ai Chao <aichao@...inos.cn>
> > + * Copyright (C) 2024 KylinSoft Corporation.
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/device.h>
> > +#include <linux/input.h>
> > +#include <linux/module.h>
> > +#include <linux/wmi.h>
> > +
> > +#define WMI_LENOVO_CAMERABUTTON_EVENT_GUID
> > "50C76F1F-D8E4-D895-0A3D-62F4EA400013"
> > +
> > +struct lenovo_wmi_priv {
> > + struct input_dev *idev;
> > +};
> > +
> > +enum {
> > + SW_CAMERA_OFF = 0,
> > + SW_CAMERA_ON = 1,
> > +};
> > +
> > +static void lenovo_wmi_notify(struct wmi_device *wdev, union acpi_object
> > *obj)
> > +{
> > + struct lenovo_wmi_priv *priv = dev_get_drvdata(&wdev->dev);
> > + u8 camera_mode;
> > +
> > + if (obj->type != ACPI_TYPE_BUFFER) {
> > + dev_err(&wdev->dev, "Bad response type %u\n", obj->type);
> > + return;
> > + }
> > +
> > + if (obj->buffer.length != 1) {
> > + dev_err(&wdev->dev, "Invalid buffer length %u\n",
> > obj->buffer.length);
> > + return;
> > + }
> > +
> > + /* obj->buffer.pointer[0] is camera mode:
> > + * 0 camera close
> > + * 1 camera open
> > + */
> > + camera_mode = obj->buffer.pointer[0];
> > + if (camera_mode > SW_CAMERA_ON) {
> > + dev_err(&wdev->dev, "Unknown camera mode %u\n", camera_mode);
> > + return;
> > + }
> > +
> > + if (camera_mode == SW_CAMERA_ON) {
> > + input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 1);
> > + input_sync(priv->idev);
> > + input_report_key(priv->idev, KEY_CAMERA_ACCESS_ENABLE, 0);
> > + } else {
> > + input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 1);
> > + input_sync(priv->idev);
> > + input_report_key(priv->idev, KEY_CAMERA_ACCESS_DISABLE, 0);
> > + }
While not exactly wrong the if seems unnecessary, you could do:
unsigned int keycode;
...
keycode = camera_mode == SW_CAMERA_ON ? KEY_CAMERA_ACCESS_ENABLE :
KEY_CAMERA_ACCESS_DISABLE;
input_report_key(priv->idev, keycode, 1);
input_sync(priv->idev);
input_report_key(priv->idev, keycode, 0);
> > + input_sync(priv->idev);
> > +}
Armin,
I tried to figure out the concurrency rules for the WMI notify handler but
came up basically nothing. I suppose it boils down on ACPI notify handling
and I couldn't find useful documentation about that either. :-/
Could you perhaps add this information into WMI documentation?
--
i.
> > +
> > +static int lenovo_wmi_probe(struct wmi_device *wdev, const void *context)
> > +{
> > + struct lenovo_wmi_priv *priv;
> > +
> > + priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + dev_set_drvdata(&wdev->dev, priv);
> > +
> > + priv->idev = devm_input_allocate_device(&wdev->dev);
> > + if (!priv->idev)
> > + return -ENOMEM;
> > +
> > + priv->idev->name = "Lenovo WMI Camera Button";
> > + priv->idev->phys = "wmi/input0";
> > + priv->idev->id.bustype = BUS_HOST;
> > + priv->idev->dev.parent = &wdev->dev;
> > + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_ENABLE);
> > + input_set_capability(priv->idev, EV_KEY, KEY_CAMERA_ACCESS_DISABLE);
> > +
> > + return input_register_device(priv->idev);
> > +}
> > +
> > +static const struct wmi_device_id lenovo_wmi_id_table[] = {
> > + { .guid_string = WMI_LENOVO_CAMERABUTTON_EVENT_GUID },
> > + { }
> > +};
> > +
> > +static struct wmi_driver lenovo_wmi_driver = {
> > + .driver = {
> > + .name = "lenovo-wmi-camera",
> > + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> > + },
> > + .id_table = lenovo_wmi_id_table,
> > + .no_singleton = true,
> > + .probe = lenovo_wmi_probe,
> > + .notify = lenovo_wmi_notify,
> > +};
> > +
> > +module_wmi_driver(lenovo_wmi_driver);
> > +
> > +MODULE_DEVICE_TABLE(wmi, lenovo_wmi_id_table);
> > +MODULE_AUTHOR("Ai Chao <aichao@...inos.cn>");
> > +MODULE_DESCRIPTION("Lenovo WMI Camera Button Driver");
> > +MODULE_LICENSE("GPL");
>
> Looks good to me.
>
> Reviewed-by: Armin Wolf <W_Armin@....de>
>
Powered by blists - more mailing lists