lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1860c559-5a5c-4673-9d08-253f0945762b@linaro.org>
Date: Sun, 17 Mar 2024 15:57:58 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Kamil Kasperski <ressetkk@...il.com>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
 Jernej Skrabec <jernej.skrabec@...il.com>,
 Samuel Holland <samuel@...lland.org>, Maxime Ripard <mripard@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev
Subject: Re: [PATCH v2 3/3] arm64: dts: allwinner: h616: add support for T95
 tv boxes

On 17/03/2024 02:34, Kamil Kasperski wrote:
> Add dtsi file for T95 tv boxes and add initial
> support for T95 5G AXP313A variant with a board name
> H616-T95MAX-AXP313A-v3.0
> 
> internal NAND chip is connected to NAND controller
> I can't see any nand in sun50i-h616.dtsi, so access to
> internal memory is not implemented.

Please wrap commit message according to Linux coding style / submission
process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

> 
> Signed-off-by: Kamil Kasperski <ressetkk@...il.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile             |   1 +
>  arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++
>  .../dts/allwinner/sun50i-h616-t95max-axp313.dts    |  85 ++++++++++++++++
>  3 files changed, 195 insertions(+)
> 

> +
> +	reg_vcc3v3: vcc3v3 {
> +		/* discrete 3.3V regulator */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	wifi_pwrseq: wifi_pwrseq {

No underscores in node names. From where did you copy this code?

> +		compatible = "mmc-pwrseq-simple";
> +		clocks = <&rtc CLK_OSC32K_FANOUT>;
> +		clock-names = "ext_clock";
> +		pinctrl-0 = <&x32clk_fanout_pin>;
> +		pinctrl-names = "default";
> +		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
> +	};
> +};
> +


Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ