lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4e168fbc-8a13-4666-ab80-e3032f61ef38@oss.nxp.com>
Date: Mon, 18 Mar 2024 09:32:24 +0200
From: Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>
To: Wadim Mueller <wafgo01@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
 Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
 Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh+dt@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>,
 Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>, NXP Linux Team <linux-imx@....com>,
 Chester Lin <chester62515@...il.com>, Andreas Färber
 <afaerber@...e.de>, Matthias Brugger <mbrugger@...e.com>,
 NXP S32 Linux Team <s32@....com>,
 Alexandre Torgue <alexandre.torgue@...s.st.com>,
 Jose Abreu <joabreu@...opsys.com>,
 Maxime Coquelin <mcoquelin.stm32@...il.com>,
 Michael Turquette <mturquette@...libre.com>, Stephen Boyd
 <sboyd@...nel.org>, Richard Cochran <richardcochran@...il.com>,
 Simon Horman <horms@...nel.org>, Andrew Halaney <ahalaney@...hat.com>,
 Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
 Johannes Zink <j.zink@...gutronix.de>, Shenwei Wang <shenwei.wang@....com>,
 "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
 Swee Leong Ching <leong.ching.swee@...el.com>,
 Giuseppe Cavallaro <peppe.cavallaro@...com>, netdev@...r.kernel.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-arm-kernel@...ts.infradead.org,
 linux-stm32@...md-mailman.stormreply.com, linux-clk@...r.kernel.org
Subject: Re: [PATCH 1/3] arm64: dts: S32G3: Introduce device tree for
 S32G-VNP-RDB3

On 3/16/24 00:27, Wadim Mueller wrote:
> This commit adds device tree support for the NXP S32G3-based
> S32G-VNP-RDB3 Board (Vehicle Networking Platform - Reference Design Board) [1].
> 
> The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
> 
> The device tree files are derived from the official NXP downstream Linux tree [2].
> 
> This addition encompasses a limited selection of peripherals that are upstream-supported. Apart from the ARM System Modules (GIC, Generic Timer, etc.), the following IPs have been validated:
> 
>     UART: fsl-linflexuart
>     SDHC: fsl-imx-esdhc
>     Ethernet: synopsys gmac/stmac
> 
> Clock settings for the chip rely on ATF Firmware [3]. Pin control integration into the device tree is pending and currently relies on Firmware/U-Boot settings [4].
> 
> These changes were validated using the latest BSP39 Firmware/U-Boot from NXP [5].
> 
> The modifications enable booting the official Ubuntu 22.04 from NXP on
> the RDB3 with default settings from the SD card and eMMC.
> 
> [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
> [2] https://github.com/nxp-auto-linux/linux
> [3] https://github.com/nxp-auto-linux/arm-trusted-firmware
> [4] https://github.com/nxp-auto-linux/u-boot
> [5] https://github.com/nxp-auto-linux/auto_yocto_bsp
> 
> Signed-off-by: Wadim Mueller <wafgo01@...il.com>

This patch seems to be heavily based on the downstream version of the
kernel. Many of the changes originate from NXP. Therefore, shouldn't the
authors also be mentioned here?

> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  arch/arm64/boot/dts/freescale/s32g3.dtsi      | 352 ++++++++++++++++++
>  .../boot/dts/freescale/s32g399a-rdb3.dts      |  57 +++
>  .../dt-bindings/clock/nxp,s32-scmi-clock.h    | 158 ++++++++
>  4 files changed, 568 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/s32g3.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
>  create mode 100644 include/dt-bindings/clock/nxp,s32-scmi-clock.h
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2cb0212b63c6..e701008dbc7b 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -252,3 +252,4 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
>  dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
>  dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
>  dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
> +dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb
> diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> new file mode 100644
> index 000000000000..481ddcfd3a6d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
> @@ -0,0 +1,352 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/nxp,s32-scmi-clock.h>
> +/ {
> +	compatible = "nxp,s32g3";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <0x02>;
> +	#size-cells = <0x02>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpu4>;
> +				};
> +
> +				core1 {
> +					cpu = <&cpu5>;
> +				};
> +
> +				core2 {
> +					cpu = <&cpu6>;
> +				};
> +
> +				core3 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster0_l2_cache>;
> +			#cooling-cells = <2>;
> +		};

Are the '#cooling-cells = <2>;' used in this patch? If not, shouldn't
you drop them?

> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x1>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster0_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x2>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster0_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x3>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster0_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu4: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x100>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster1_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu5: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x101>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster1_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu6: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x102>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster1_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu7: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x103>;
> +			enable-method = "psci";
> +			clocks = <&dfs S32_SCMI_CLK_A53>;
> +			next-level-cache = <&cluster1_l2_cache>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cluster0_l2_cache: l2-cache0 {
> +			compatible = "cache";
> +			status = "okay";
> +		};
> +
> +		cluster1_l2_cache: l2-cache1 {
> +			compatible = "cache";
> +			status = "okay";
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,cortex-a53-pmu";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* virt */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* hyp-virt */
> +		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, /* sec-phys */
> +		             <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; /* phys */
> +		always-on;
> +	};

1. 'always-on' -> 'arm,no-tick-in-suspend' as the timer does not tick
during suspend on this platform.

2. The ARMv8 timer driver expects a certain order of interrupts
when the interrupt names are not used in bindings which is not followed
in this node.

Here is the fix to be applied:
https://github.com/nxp-auto-linux/linux/commit/f23552d3f8d8f3893dc5b485ba79ee73895f5b27

> +
> +	reserved-memory  {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		scmi_tx_buf: shm@...00000 {
> +			compatible = "arm,scmi-shmem";
> +			reg = <0x0 0xd0000000 0x0 0x80>;
> +			no-map;
> +		};
> +
> +		scmi_rx_buf: shm@...00080 {
> +			compatible = "arm,scmi-shmem";
> +			reg = <0x0 0xd0000080 0x0 0x80>;
> +			no-map;
> +		};
> +	};
> +
> +	firmware {
> +		scmi: scmi {
> +			compatible = "arm,scmi-smc";
> +			mbox-names = "tx", "rx";
> +			shmem = <&scmi_tx_buf>, <&scmi_rx_buf>;

Have you verified the RX support?

> +			arm,smc-id = <0xc20000fe>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "okay";
> +			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "p2a_notif";

This support is not available upstream and, therefore, should be either
removed or completely added.

> +
> +			dfs: protocol@13 {
> +				reg = <0x13>;
> +				#clock-cells = <1>;
> +			};
> +
> +			clks: protocol@14 {
> +				reg = <0x14>;
> +				#clock-cells = <1>;
> +			};
> +
> +			reset: protocol@16 {
> +				reg = <0x16>;
> +				#reset-cells = <1>;
> +			};

Is this really needed to be part of this patch?

> +
> +			pinctrl_scmi: protocol@80 {
> +				reg = <0x80>;
> +				#pinctrl-cells = <2>;
> +
> +				status = "disabled";
> +			};

Not documented.

> +		};
> +
> +		psci: psci {
> +			compatible = "arm,psci-1.0";
> +			method = "smc";
> +		};
> +	};
> +
> +	soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0 0x80000000>;
> +
> +		uart0: serial@...c8000 {
> +			compatible = "nxp,s32g3-linflexuart",
> +				     "fsl,s32v234-linflexuart";
> +			reg = <0x401c8000 0x3000>;
> +			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@...cc000 {
> +			compatible = "nxp,s32g3-linflexuart",
> +				     "fsl,s32v234-linflexuart";
> +			reg = <0x401cc000 0x3000>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@...bc000 {
> +			compatible = "nxp,s32g3-linflexuart",
> +				     "fsl,s32v234-linflexuart";
> +			reg = <0x402bc000 0x3000>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
> +			status = "disabled";
> +		};
> +
> +		gic: interrupt-controller@...00000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			reg = <0x50800000 0x10000>,
> +			      <0x50900000 0x200000>,
> +			      <0x50400000 0x2000>,
> +			      <0x50410000 0x2000>,
> +			      <0x50420000 0x2000>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			mbi-ranges = <167 16>;
> +		};
> +
> +		qspi: spi@...34000 {
> +			compatible = "nxp,s32g3-qspi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0 0x00000000 0x0 0x20000000>,
> +				<0x0 0x40134000 0x0 0x1000>;
> +			reg-names = "QuadSPI-memory", "QuadSPI";
> +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +			clock-names = "qspi_en", "qspi";
> +			clocks = <&clks S32_SCMI_CLK_QSPI_FLASH1X>,
> +				 <&clks S32_SCMI_CLK_QSPI_FLASH1X>;
> +			spi-max-frequency = <200000000>;
> +			spi-num-chipselects = <2>;
> +			status = "disabled";
> +		};

This binding and support is missing. Please delete.

> +
> +		usdhc0: mmc@...f0000 {
> +			compatible = "nxp,s32g3-usdhc",
> +			             "nxp,s32g2-usdhc";
> +			reg = <0x402f0000 0x1000>;
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clks S32_SCMI_CLK_USDHC_MODULE>,
> +				 <&clks S32_SCMI_CLK_USDHC_AHB>,
> +				 <&clks S32_SCMI_CLK_USDHC_CORE>;
> +			clock-names = "ipg", "ahb", "per";
> +			status = "disabled";
> +		};

nxp,s32g3-usdhc is not documented.

> +
> +		gmac0: ethernet@...3c000 {
> +			status = "disabled";
> +			compatible = "nxp,s32-dwmac";
> +			reg = <0x4033c000 0x2000>, /* gmac IP */
> +			      <0x4007c004 0x4>;    /* S32 CTRL_STS reg */
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "macirq";
> +			tx-fifo-depth = <20480>;
> +			rx-fifo-depth = <20480>;
> +			dma-coherent;
> +			snps,mtl-rx-config = <&mtl_rx_setup_gmac0>;
> +			snps,mtl-tx-config = <&mtl_tx_setup_gmac0>;
> +			clocks = <&clks S32_SCMI_CLK_GMAC0_AXI>,
> +				 <&clks S32_SCMI_CLK_GMAC0_AXI>,
> +				 <&clks S32_SCMI_CLK_GMAC0_TX_SGMII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_TX_RGMII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_TX_RMII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_TX_MII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_RX_SGMII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_RX_RGMII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_RX_RMII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_RX_MII>,
> +				 <&clks S32_SCMI_CLK_GMAC0_TS>;
> +			clock-names = "stmmaceth", "pclk",
> +				      "tx_sgmii", "tx_rgmii",
> +				      "tx_rmii", "tx_mii",
> +				      "rx_sgmii", "rx_rgmii",
> +				      "rx_rmii", "rx_mii",
> +				      "ptp_ref";
> +
> +			mtl_rx_setup_gmac0: rx-queues-config {
> +				snps,rx-queues-to-use = <5>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				queue@0 {};
> +				queue@1 {};
> +				queue@2 {};
> +				queue@3 {};
> +				queue@4 {};
> +			};
> +
> +			mtl_tx_setup_gmac0: tx-queues-config {
> +				snps,tx-queues-to-use = <5>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				queue@0 {};
> +				queue@1 {};
> +				queue@2 {};
> +				queue@3 {};
> +				queue@4 {};
> +			};
> +
> +			gmac0_mdio: mdio0 {
> +				compatible = "snps,dwmac-mdio";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> new file mode 100644
> index 000000000000..707b503c0165
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)
> + */
> +
> +/dts-v1/;
> +
> +#include "s32g3.dtsi"
> +
> +/ {
> +	model = "NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3)";
> +	compatible = "nxp,s32g399a-rdb3", "nxp,s32g3";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		ethernet0 = &gmac0;
> +		reset = &reset;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	/* 4GiB RAM */
> +	memory@...00000 {
> +		device_type = "memory";
> +		reg = <0x0 0x80000000 0 0x80000000>,
> +		      <0x8 0x80000000 0 0x80000000>;
> +	};
> +};
> +
> +&gmac0 {
> +	status = "okay";
> +	phy-handle = <&mdio_a_phy1>;
> +	phy-mode = "rgmii-id";
> +};
> +
> +&gmac0_mdio {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	mdio_a_phy1: ethernet-phy@1 {
> +		reg = <1>;
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&usdhc0 {
> +	status = "okay";
> +};
> diff --git a/include/dt-bindings/clock/nxp,s32-scmi-clock.h b/include/dt-bindings/clock/nxp,s32-scmi-clock.h
> new file mode 100644
> index 000000000000..240022c1f109
> --- /dev/null
> +++ b/include/dt-bindings/clock/nxp,s32-scmi-clock.h
> @@ -0,0 +1,158 @@
> +/* SPDX-License-Identifier: BSD-3-Clause */
> +
> +#ifndef __DT_BINDINGS_NXP_SCMI_CLOCK_S32_H
> +#define __DT_BINDINGS_NXP_SCMI_CLOCK_S32_H
> +
> +#define S32_SCMI_COMPLEX_CLK		0xFFFFFFFFU
> +#define S32_SCMI_NOT_IMPLEMENTED_CLK	0xFFFFFFFEU
> +
> +#define S32_SCMI_CLK_BASE_ID		0U
> +#define S32_SCMI_CLK(N)		        ((N) + S32_SCMI_CLK_BASE_ID)
> +#define S32_PLAT_SCMI_CLK(N)		((N) + S32_SCMI_PLAT_CLK_BASE_ID)
> +
> +#define S32_SCMI_CLK_VERSION_MAJOR	(1)
> +#define S32_SCMI_CLK_VERSION_MINOR	(0)
> +
> +/* A53 */
> +#define S32_SCMI_CLK_A53		S32_SCMI_CLK(0)
> +/* SERDES */
> +#define S32_SCMI_CLK_SERDES_AXI	        S32_SCMI_CLK(1)
> +#define S32_SCMI_CLK_SERDES_AUX	        S32_SCMI_CLK(2)
> +#define S32_SCMI_CLK_SERDES_APB	        S32_SCMI_CLK(3)
> +#define S32_SCMI_CLK_SERDES_REF	        S32_SCMI_CLK(4)
> +/* FTM0 */
> +#define S32_SCMI_CLK_FTM0_SYS		S32_SCMI_CLK(5)
> +#define S32_SCMI_CLK_FTM0_EXT		S32_SCMI_CLK(6)
> +/* FTM1 */
> +#define S32_SCMI_CLK_FTM1_SYS		S32_SCMI_CLK(7)
> +#define S32_SCMI_CLK_FTM1_EXT		S32_SCMI_CLK(8)
> +/* FlexCAN */
> +#define S32_SCMI_CLK_FLEXCAN_REG	S32_SCMI_CLK(9)
> +#define S32_SCMI_CLK_FLEXCAN_SYS	S32_SCMI_CLK(10)
> +#define S32_SCMI_CLK_FLEXCAN_CAN	S32_SCMI_CLK(11)
> +#define S32_SCMI_CLK_FLEXCAN_TS	        S32_SCMI_CLK(12)
> +/* LINFlexD */
> +#define S32_SCMI_CLK_LINFLEX_XBAR	S32_SCMI_CLK(13)
> +#define S32_SCMI_CLK_LINFLEX_LIN	S32_SCMI_CLK(14)
> +#define S32_SCMI_CLK_GMAC0_TS		S32_SCMI_CLK(15)
> +/* GMAC0 - SGMII */
> +#define S32_SCMI_CLK_GMAC0_RX_SGMII	S32_SCMI_CLK(16)
> +#define S32_SCMI_CLK_GMAC0_TX_SGMII	S32_SCMI_CLK(17)
> +/* GMAC0 - RGMII */
> +#define S32_SCMI_CLK_GMAC0_RX_RGMII	S32_SCMI_CLK(18)
> +#define S32_SCMI_CLK_GMAC0_TX_RGMII	S32_SCMI_CLK(19)
> +/* GMAC0 - RMII */
> +#define S32_SCMI_CLK_GMAC0_RX_RMII	S32_SCMI_CLK(20)
> +#define S32_SCMI_CLK_GMAC0_TX_RMII	S32_SCMI_CLK(21)
> +/* GMAC0 - MII */
> +#define S32_SCMI_CLK_GMAC0_RX_MII	S32_SCMI_CLK(22)
> +#define S32_SCMI_CLK_GMAC0_TX_MII	S32_SCMI_CLK(23)
> +#define S32_SCMI_CLK_GMAC0_AXI	        S32_SCMI_CLK(24)
> +/* SPI */
> +#define S32_SCMI_CLK_SPI_REG		S32_SCMI_CLK(25)
> +#define S32_SCMI_CLK_SPI_MODULE	        S32_SCMI_CLK(26)
> +/* QSPI */
> +#define S32_SCMI_CLK_QSPI_REG		S32_SCMI_CLK(27)
> +#define S32_SCMI_CLK_QSPI_AHB		S32_SCMI_CLK(28)
> +#define S32_SCMI_CLK_QSPI_FLASH2X	S32_SCMI_CLK(29)
> +#define S32_SCMI_CLK_QSPI_FLASH1X	S32_SCMI_CLK(30)
> +/* uSDHC */
> +#define S32_SCMI_CLK_USDHC_AHB	        S32_SCMI_CLK(31)
> +#define S32_SCMI_CLK_USDHC_MODULE	S32_SCMI_CLK(32)
> +#define S32_SCMI_CLK_USDHC_CORE	        S32_SCMI_CLK(33)
> +#define S32_SCMI_CLK_USDHC_MOD32K	S32_SCMI_CLK(34)
> +/* DDR */
> +#define S32_SCMI_CLK_DDR_REG		S32_SCMI_CLK(35)
> +#define S32_SCMI_CLK_DDR_PLL_REF	S32_SCMI_CLK(36)
> +#define S32_SCMI_CLK_DDR_AXI		S32_SCMI_CLK(37)
> +/* SRAM */
> +#define S32_SCMI_CLK_SRAM_AXI		S32_SCMI_CLK(38)
> +#define S32_SCMI_CLK_SRAM_REG		S32_SCMI_CLK(39)
> +/* I2C */
> +#define S32_SCMI_CLK_I2C_REG		S32_SCMI_CLK(40)
> +#define S32_SCMI_CLK_I2C_MODULE	        S32_SCMI_CLK(41)
> +/* SIUL2 */
> +#define S32_SCMI_CLK_SIUL2_REG	        S32_SCMI_CLK(42)
> +#define S32_SCMI_CLK_SIUL2_FILTER	S32_SCMI_CLK(43)
> +/* CRC */
> +#define S32_SCMI_CLK_CRC_REG		S32_SCMI_CLK(44)
> +#define S32_SCMI_CLK_CRC_MODULE	        S32_SCMI_CLK(45)
> +/* EIM0 */
> +#define S32_SCMI_CLK_EIM0_REG		S32_SCMI_CLK(46)
> +#define S32_SCMI_CLK_EIM0_MODULE	S32_SCMI_CLK(47)
> +/* EIM0 */
> +#define S32_SCMI_CLK_EIM123_REG	        S32_SCMI_CLK(48)
> +#define S32_SCMI_CLK_EIM123_MODULE	S32_SCMI_CLK(49)
> +/* EIM */
> +#define S32_SCMI_CLK_EIM_REG		S32_SCMI_CLK(50)
> +#define S32_SCMI_CLK_EIM_MODULE	        S32_SCMI_CLK(51)
> +/* FCCU */
> +#define S32_SCMI_CLK_FCCU_MODULE	S32_SCMI_CLK(52)
> +#define S32_SCMI_CLK_FCCU_SAFE	        S32_SCMI_CLK(53)
> +/* RTC */
> +#define S32_SCMI_CLK_RTC_REG		S32_SCMI_CLK(54)
> +#define S32_SCMI_CLK_RTC_SIRC		S32_SCMI_CLK(55)
> +#define S32_SCMI_CLK_RTC_FIRC		S32_SCMI_CLK(56)
> +/* SWT */
> +#define S32_SCMI_CLK_SWT_MODULE	        S32_SCMI_CLK(57)
> +#define S32_SCMI_CLK_SWT_COUNTER	S32_SCMI_CLK(58)
> +/* STM */
> +#define S32_SCMI_CLK_STM_MODULE	        S32_SCMI_CLK(59)
> +#define S32_SCMI_CLK_STM_REG		S32_SCMI_CLK(60)
> +/* PIT */
> +#define S32_SCMI_CLK_PIT_MODULE	        S32_SCMI_CLK(61)
> +#define S32_SCMI_CLK_PIT_REG		S32_SCMI_CLK(62)
> +/* eDMA */
> +#define S32_SCMI_CLK_EDMA_MODULE	S32_SCMI_CLK(63)
> +#define S32_SCMI_CLK_EDMA_AHB		S32_SCMI_CLK(64)
> +/* ADC */
> +#define S32_SCMI_CLK_SAR_ADC_BUS	S32_SCMI_CLK(65)
> +/* CMU */
> +#define S32_SCMI_CLK_CMU_MODULE	        S32_SCMI_CLK(66)
> +#define S32_SCMI_CLK_CMU_REG		S32_SCMI_CLK(67)
> +/* TMU */
> +#define S32_SCMI_CLK_TMU_MODULE	        S32_SCMI_CLK(68)
> +#define S32_SCMI_CLK_TMU_REG		S32_SCMI_CLK(69)
> +/* FlexRay */
> +#define S32_SCMI_CLK_FR_REG		S32_SCMI_CLK(70)
> +#define S32_SCMI_CLK_FR_PE		S32_SCMI_CLK(71)
> +/* WKPU */
> +#define S32_SCMI_CLK_WKPU_MODULE	S32_SCMI_CLK(72)
> +#define S32_SCMI_CLK_WKPU_REG		S32_SCMI_CLK(73)
> +/* SRC */
> +#define S32_SCMI_CLK_SRC_MODULE	        S32_SCMI_CLK(74)
> +#define S32_SCMI_CLK_SRC_REG		S32_SCMI_CLK(75)
> +/* SRC-TOP */
> +#define S32_SCMI_CLK_SRC_TOP_MODULE	S32_SCMI_CLK(76)
> +#define S32_SCMI_CLK_SRC_TOP_REG	S32_SCMI_CLK(77)
> +/* CTU */
> +#define S32_SCMI_CLK_CTU_MODULE	        S32_SCMI_CLK(78)
> +#define S32_SCMI_CLK_CTU_CTU		S32_SCMI_CLK(79)
> +/* DBG */
> +#define S32_SCMI_CLK_DBG_SYS4		S32_SCMI_CLK(80)
> +#define S32_SCMI_CLK_DBG_SYS2		S32_SCMI_CLK(81)
> +/* Cortex-M7 */
> +#define S32_SCMI_CLK_M7_CORE		S32_SCMI_CLK(82)
> +/* DMAMUX */
> +#define S32_SCMI_CLK_DMAMUX_MODULE	S32_SCMI_CLK(83)
> +#define S32_SCMI_CLK_DMAMUX_REG	        S32_SCMI_CLK(84)
> +/* GIC */
> +#define S32_SCMI_CLK_GIC_MODULE	        S32_SCMI_CLK(85)
> +/* MSCM */
> +#define S32_SCMI_CLK_MSCM_MODULE	S32_SCMI_CLK(86)
> +#define S32_SCMI_CLK_MSCM_REG		S32_SCMI_CLK(87)
> +/* SEMA42 */
> +#define S32_SCMI_CLK_SEMA42_MODULE	S32_SCMI_CLK(88)
> +#define S32_SCMI_CLK_SEMA42_REG	        S32_SCMI_CLK(89)
> +/* XRDC */
> +#define S32_SCMI_CLK_XRDC_MODULE	S32_SCMI_CLK(90)
> +#define S32_SCMI_CLK_XRDC_REG		S32_SCMI_CLK(91)
> +/* CLKOUT */
> +#define S32_SCMI_CLK_CLKOUT_0		S32_SCMI_CLK(92)
> +#define S32_SCMI_CLK_CLKOUT_1		S32_SCMI_CLK(93)
> +
> +#define S32_SCMI_PLAT_CLK_BASE_ID	S32_SCMI_CLK(94)
> +
> +#define S32_SCMI_CLK_MAX_ID		S32_PLAT_SCMI_CLK(32)
> +
> +#endif

Regards,
Ghennadi


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ