linux-kernel - [PATCH v4 0/3] Add initial support for T95 TV boxes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240319-add-t95-axp313-support-v4-0-6204b6d23229@gmail.com>
Date: Tue, 19 Mar 2024 18:50:21 +0100
From: Kamil Kasperski <ressetkk@...il.com>
To: Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>, 
 Jernej Skrabec <jernej.skrabec@...il.com>, 
 Samuel Holland <samuel@...lland.org>, Maxime Ripard <mripard@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev, 
 Kamil Kasperski <ressetkk@...il.com>, 
 Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v4 0/3] Add initial support for T95 TV boxes

Changes in v4:
- change wifi pwrseq node name to 'pwrseq' in sun50i-h616-t95.dtsi
- replace vcc-pg-supply value to reg_aldo1 in &pio

- Link to v3: https://lore.kernel.org/r/20240317-add-t95-axp313-support-v3-0-0d63f7c23d37@gmail.com

Changes in v3:
- remove underscore from wifi_pwrseq node name in sun50i-h616-t95.dtsi
- fix line wrap in commit message
- Link to v2: https://lore.kernel.org/r/20240317-add-t95-axp313-support-v2-0-e38032811758@gmail.com

T95 is a most commonly known for being a box with a pre-installed 
malware. It uses Allwinner H616 and comes with NAND, and DDR3 
memory.

Those TV boxes usually come with common hardware:
- Allwinner H616 SoC
- 2/4 GB DDR3 SDRAM (Hynix H5TQ2G43BFR)
- 16/32/64 GB NAND flash
- microSD slot
- AXP305 or AXP313 PMIC depending on board revision
- 3.5mm A/V output
- HDMI port
- 2x USB 2.0 ports
- 100M ETH using Internal PHY
- LG642 Wi-Fi and BT chip (rebranded BCM43342)
- 7-segment display
- DC 5V barrel jack port

The board contains holes hor UART header wired to &uart0.
&uart1 is used by bluetooth module

>From the DRAM specification its operation voltage is 1.5V.

To: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
To: Conor Dooley <conor+dt@...nel.org>
To: Chen-Yu Tsai <wens@...e.org>
To: Jernej Skrabec <jernej.skrabec@...il.com>
To: Samuel Holland <samuel@...lland.org>
To: Maxime Ripard <mripard@...nel.org>
Cc: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-sunxi@...ts.linux.dev

Signed-off-by: Kamil Kasperski <ressetkk@...il.com>
---
Kamil Kasperski (3):
      dt-bindings: vendor-prefixes: add t95 string
      dt-bindings: arm: sunxi: add T95 AXP313
      arm64: dts: allwinner: h616: add support for T95 tv boxes

 Documentation/devicetree/bindings/arm/sunxi.yaml   |   5 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 arch/arm64/boot/dts/allwinner/Makefile             |   1 +
 arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++
 .../dts/allwinner/sun50i-h616-t95max-axp313.dts    |  84 ++++++++++++++++
 5 files changed, 201 insertions(+)
---
base-commit: 4138f02288333cb596885e9af03dd3ea2de845cb
change-id: 20240315-add-t95-axp313-support-5f3da8996edd

Best regards,
-- 
Kamil Kasperski <ressetkk@...il.com>