[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3834dd0a-6dd0-45b1-8b9c-0c840aaf8cf2@linaro.org>
Date: Tue, 19 Mar 2024 07:09:03 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, Naushir Patuck
<naush@...pberrypi.com>, Laurent Pinchart
<laurent.pinchart@...asonboard.com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Kieran Bingham <kieran.bingham@...asonboard.com>
Subject: Re: [PATCH 2/4] dt-bindings: media: Add bindings for
raspberrypi,rp1-cfe
On 18/03/2024 16:49, Tomi Valkeinen wrote:
> Add DT bindings for raspberrypi,rp1-cfe.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
> ---
> .../bindings/media/raspberrypi,rp1-cfe.yaml | 103 +++++++++++++++++++++
> 1 file changed, 103 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
> new file mode 100644
> index 000000000000..7b2beeaaab0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/raspberrypi,rp1-cfe.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Raspberry Pi PiSP Camera Front End
> +
> +maintainers:
> + - Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
> + - Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>
> +
> +description: |
> + The Raspberry Pi PiSP Camera Front End is a module in Raspberrypi 5's RP1 I/O
> + controller, that contains:
> + - MIPI D-PHY
> + - MIPI CSI-2 receiver
> + - Simple image processor (called PiSP Front End, or FE)
> +
> + The FE documentation is available at:
> + https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
> +
> + The PHY and CSI-2 receiver part have no public documentation.
> +
> +properties:
> + compatible:
> + const: raspberrypi,rpi5-rp1-cfe
> +
> + reg:
> + items:
> + - description: CSI-2 registers
> + - description: D-PHY registers
> + - description: MIPI CFG (a simple top-level mux) registers
> + - description: FE registers
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + port:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + additionalProperties: false
> + description: CSI-2 RX Port
Only one port, so there is nothing to output to?
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + clock-lanes:
> + maxItems: 1
> +
> + clock-noncontinuous: true
Drop
> +
> + required:
> + - clock-lanes
> + - data-lanes
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rp1.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/mfd/rp1.h>
> +
> + rpi1 {
soc
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + csi@...000 {
Fix the indentation. You switched back to 2 spaces here...
> + compatible = "raspberrypi,rp1-cfe";
> + reg = <0xc0 0x40110000 0x0 0x100>,
> + <0xc0 0x40114000 0x0 0x100>,
Just one space before 0x0
>
Best regards,
Krzysztof
Powered by blists - more mailing lists