Message-ID:
 <DM6PR12MB5534C61A0BE655B4BE072D9EC7332@DM6PR12MB5534.namprd12.prod.outlook.com>
Date: Wed, 20 Mar 2024 17:50:19 +0000
From: David Thompson <davthompson@...dia.com>
To: Jiri Pirko <jiri@...nulli.us>
CC: "davem@...emloft.net" <davem@...emloft.net>, "edumazet@...gle.com"
	<edumazet@...gle.com>, "kuba@...nel.org" <kuba@...nel.org>,
	"pabeni@...hat.com" <pabeni@...hat.com>, "u.kleine-koenig@...gutronix.de"
	<u.kleine-koenig@...gutronix.de>, "leon@...nel.org" <leon@...nel.org>, Asmaa
 Mnebhi <asmaa@...dia.com>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH net v2] mlxbf_gige: call request_irq() after NAPI
 initialized

> -----Original Message-----
> From: Jiri Pirko <jiri@...nulli.us>
> Sent: Wednesday, March 20, 2024 8:32 AM
> To: David Thompson <davthompson@...dia.com>
> Cc: davem@...emloft.net; edumazet@...gle.com; kuba@...nel.org;
> pabeni@...hat.com; u.kleine-koenig@...gutronix.de; leon@...nel.org; Asmaa
> Mnebhi <asmaa@...dia.com>; netdev@...r.kernel.org; linux-
> kernel@...r.kernel.org
> Subject: Re: [PATCH net v2] mlxbf_gige: call request_irq() after NAPI initialized
> 
> Tue, Mar 19, 2024 at 07:17:32PM CET, davthompson@...dia.com wrote:
> >The mlxbf_gige driver encounters a NULL pointer exception in
> >mlxbf_gige_open() when kdump is enabled.  The sequence to reproduce the
> >exception is as follows:
> >a) enable kdump
> >b) trigger kdump via "echo c > /proc/sysrq-trigger"
> >c) kdump kernel executes
> >d) kdump kernel loads mlxbf_gige module
> >e) the mlxbf_gige module runs its open() as the
> >   the "oob_net0" interface is brought up
> >f) mlxbf_gige module will experience an exception
> >   during its open(), something like:
> >
> >     Unable to handle kernel NULL pointer dereference at virtual address
> 0000000000000000
> >     Mem abort info:
> >       ESR = 0x0000000086000004
> >       EC = 0x21: IABT (current EL), IL = 32 bits
> >       SET = 0, FnV = 0
> >       EA = 0, S1PTW = 0
> >       FSC = 0x04: level 0 translation fault
> >     user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000
> >     [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
> >     Internal error: Oops: 0000000086000004 [#1] SMP
> >     CPU: 0 PID: 812 Comm: NetworkManager Tainted: G           OE     5.15.0-1035-
> bluefield #37-Ubuntu
> >     Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main
> Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024
> >     pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> >     pc : 0x0
> >     lr : __napi_poll+0x40/0x230
> >     sp : ffff800008003e00
> >     x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff
> >     x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8
> >     x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000
> >     x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000
> >     x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0
> >     x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c
> >     x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398
> >     x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2
> >     x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100
> >     x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238
> >     Call trace:
> >      0x0
> >      net_rx_action+0x178/0x360
> >      __do_softirq+0x15c/0x428
> >      __irq_exit_rcu+0xac/0xec
> >      irq_exit+0x18/0x2c
> >      handle_domain_irq+0x6c/0xa0
> >      gic_handle_irq+0xec/0x1b0
> >      call_on_irq_stack+0x20/0x2c
> >      do_interrupt_handler+0x5c/0x70
> >      el1_interrupt+0x30/0x50
> >      el1h_64_irq_handler+0x18/0x2c
> >      el1h_64_irq+0x7c/0x80
> >      __setup_irq+0x4c0/0x950
> >      request_threaded_irq+0xf4/0x1bc
> >      mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige]
> >      mlxbf_gige_open+0x5c/0x170 [mlxbf_gige]
> >      __dev_open+0x100/0x220
> >      __dev_change_flags+0x16c/0x1f0
> >      dev_change_flags+0x2c/0x70
> >      do_setlink+0x220/0xa40
> >      __rtnl_newlink+0x56c/0x8a0
> >      rtnl_newlink+0x58/0x84
> >      rtnetlink_rcv_msg+0x138/0x3c4
> >      netlink_rcv_skb+0x64/0x130
> >      rtnetlink_rcv+0x20/0x30
> >      netlink_unicast+0x2ec/0x360
> >      netlink_sendmsg+0x278/0x490
> >      __sock_sendmsg+0x5c/0x6c
> >      ____sys_sendmsg+0x290/0x2d4
> >      ___sys_sendmsg+0x84/0xd0
> >      __sys_sendmsg+0x70/0xd0
> >      __arm64_sys_sendmsg+0x2c/0x40
> >      invoke_syscall+0x78/0x100
> >      el0_svc_common.constprop.0+0x54/0x184
> >      do_el0_svc+0x30/0xac
> >      el0_svc+0x48/0x160
> >      el0t_64_sync_handler+0xa4/0x12c
> >      el0t_64_sync+0x1a4/0x1a8
> >     Code: bad PC value
> >     ---[ end trace 7d1c3f3bf9d81885 ]---
> >     Kernel panic - not syncing: Oops: Fatal exception in interrupt
> >     Kernel Offset: 0x2870a7a00000 from 0xffff800008000000
> >     PHYS_OFFSET: 0x80000000
> >     CPU features: 0x0,000005c1,a3332a5a
> >     Memory Limit: none
> >     ---[ end Kernel panic - not syncing: Oops: Fatal exception in
> > interrupt ]---
> >
> >The exception happens because there is a pending RX interrupt before
> >the call to request_irq(RX IRQ) executes.  Then, the RX IRQ handler
> >fires immediately after this request_irq() completes. The RX IRQ
> >handler runs "napi_schedule()" before NAPI is fully initialized via
> "netif_napi_add()"
> >and "napi_enable()", both which happen later in the open() logic.
> >
> >The logic in mlxbf_gige_open() has been re-ordered so that the
> >request_irq() calls execute after NAPI is fully initialized.
> 
> This should be in imperative mood so the reader know right away that you are not
> talking about existing code and it's history, but you rather command the codebase
> what to change/do/fix/etc.
> 

OK, will update the wording.

> >
> >Also, the logic in mlxbf_gige_open() was missing a call to phy_stop()
> >in the error path, so that has been added.
> 
> Same here.
>

Yes, will update the wording here.
 
> Also, could you please have the missing phy_stop() as a separate patch as Paolo
> suggested? It's a different bug.
> 

Sure, will create a separate patch for the missing phy_stop()

> pw-bot: cr
> 
> 
> >
> >Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
> >Signed-off-by: David Thompson <davthompson@...dia.com>
> >Reviewed-by: Asmaa Mnebhi <asmaa@...dia.com>
> >---
> >v2
> >- re-worded commit message and subject for clarity
> >- updated commit message to mention that phy_stop() was added
> >  to the error path in mlxbf_gige_open()
> >---
> > .../mellanox/mlxbf_gige/mlxbf_gige_main.c     | 21 ++++++++++++-------
> > 1 file changed, 14 insertions(+), 7 deletions(-)
> >
> >diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
> >b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
> >index 3d09fa54598f..77134ca92938 100644
> >--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
> >+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
> >@@ -139,13 +139,10 @@ static int mlxbf_gige_open(struct net_device
> *netdev)
> > 	control |= MLXBF_GIGE_CONTROL_PORT_EN;
> > 	writeq(control, priv->base + MLXBF_GIGE_CONTROL);
> >
> >-	err = mlxbf_gige_request_irqs(priv);
> >-	if (err)
> >-		return err;
> > 	mlxbf_gige_cache_stats(priv);
> > 	err = mlxbf_gige_clean_port(priv);
> > 	if (err)
> >-		goto free_irqs;
> >+		return err;
> >
> > 	/* Clear driver's valid_polarity to match hardware,
> > 	 * since the above call to clean_port() resets the @@ -157,7 +154,7
> >@@ static int mlxbf_gige_open(struct net_device *netdev)
> >
> > 	err = mlxbf_gige_tx_init(priv);
> > 	if (err)
> >-		goto free_irqs;
> >+		goto phy_deinit;
> > 	err = mlxbf_gige_rx_init(priv);
> > 	if (err)
> > 		goto tx_deinit;
> >@@ -166,6 +163,10 @@ static int mlxbf_gige_open(struct net_device *netdev)
> > 	napi_enable(&priv->napi);
> > 	netif_start_queue(netdev);
> >
> >+	err = mlxbf_gige_request_irqs(priv);
> >+	if (err)
> >+		goto napi_deinit;
> >+
> > 	/* Set bits in INT_EN that we care about */
> > 	int_en = MLXBF_GIGE_INT_EN_HW_ACCESS_ERROR |
> > 		 MLXBF_GIGE_INT_EN_TX_CHECKSUM_INPUTS | @@ -182,11
> +183,17 @@ static
> >int mlxbf_gige_open(struct net_device *netdev)
> >
> > 	return 0;
> >
> >+napi_deinit:
> >+	netif_stop_queue(netdev);
> >+	napi_disable(&priv->napi);
> >+	netif_napi_del(&priv->napi);
> >+	mlxbf_gige_rx_deinit(priv);
> >+
> > tx_deinit:
> > 	mlxbf_gige_tx_deinit(priv);
> >
> >-free_irqs:
> >-	mlxbf_gige_free_irqs(priv);
> >+phy_deinit:
> >+	phy_stop(phydev);
> > 	return err;
> > }
> >
> >--
> >2.30.1
> >
> >

Powered by blists - more mailing lists