[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<OSAPR01MB158778802C8AAF3F9230259286332@OSAPR01MB1587.jpnprd01.prod.outlook.com>
Date: Wed, 20 Mar 2024 11:08:38 +0000
From: Biju Das <biju.das.jz@...renesas.com>
To: Claudiu.Beznea <claudiu.beznea@...on.dev>, "geert+renesas@...der.be"
<geert+renesas@...der.be>, "linus.walleij@...aro.org"
<linus.walleij@...aro.org>, "tglx@...utronix.de" <tglx@...utronix.de>
CC: "linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, Claudiu.Beznea
<claudiu.beznea@...on.dev>, Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: RE: [PATCH v3 2/2] pinctrl: renesas: rzg2l: Configure the interrupt
type on resume
Hi Claudiu,
> -----Original Message-----
> From: Claudiu <claudiu.beznea@...on.dev>
> Sent: Wednesday, March 20, 2024 10:43 AM
> Subject: [PATCH v3 2/2] pinctrl: renesas: rzg2l: Configure the interrupt type on resume
>
> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>
> Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time") removed
> the setup of TINT from rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup of
> TINT has been moved in rzg2l_tint_set_edge() though rzg2l_disable_tint_and_set_tint_source(). With
> this, the interrupts are not properly re-configured after a suspend-to-RAM cycle. To address this issue
> and avoid spurious interrupts while resumming set the interrupt type before enabling it.
Just a question,
Previously you don't save/restore irq_type() register during suspend/resume()??
After STR, any way we will lose that information.
Cheers,
Biju
>
> Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> ---
> drivers/pinctrl/renesas/pinctrl-rzg2l.c | 22 ++++++++++++----------
> 1 file changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 93916553bcc7..4fee3b0e6c5e 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
>
> for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
> struct irq_data *data;
> + unsigned long flags;
> unsigned int virq;
> + int ret;
>
> if (!pctrl->hwirq[i])
> continue;
> @@ -2063,17 +2065,17 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
> continue;
> }
>
> - if (!irqd_irq_disabled(data)) {
> - unsigned long flags;
> -
> - /*
> - * This has to be atomically executed to protect against a concurrent
> - * interrupt.
> - */
> - raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
> + /*
> + * This has to be atomically executed to protect against a concurrent
> + * interrupt.
> + */
> + raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
> + ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
> + if (ret)
> + dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
> + else if (!irqd_irq_disabled(data))
> rzg2l_gpio_irq_enable(data);
> - raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
> - }
> + raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
> }
> }
>
> --
> 2.39.2
Powered by blists - more mailing lists