[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <31bbac5f-a1fc-41dd-b614-f9039763084d@tuxedocomputers.com>
Date: Wed, 20 Mar 2024 12:33:44 +0100
From: Werner Sembach <wse@...edocomputers.com>
To: Hans de Goede <hdegoede@...hat.com>
Cc: Lee Jones <lee@...nel.org>, jikos@...nel.org,
linux-kernel@...r.kernel.org, Jelle van der Waa <jelle@...aa.nl>,
Miguel Ojeda <miguel.ojeda.sandonis@...il.com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
linux-input@...r.kernel.org, ojeda@...nel.org, linux-leds@...r.kernel.org,
Pavel Machek <pavel@....cz>, Gregor Riepl <onitake@...il.com>
Subject: Re: Future handling of complex RGB devices on Linux v3
Am 20.03.24 um 12:16 schrieb Werner Sembach:
> Hi Hans and the others,
>
> Am 22.02.24 um 14:14 schrieb Werner Sembach:
>> Hi,
>>
>> Thanks everyone for the exhaustive feedback. And at least this thread is a
>> good comprehesive reference for the future ^^.
>>
>> To recap the hopefully final UAPI for complex RGB lighting devices:
>>
>> - By default there is a singular /sys/class/leds/* entry that treats the
>> device as if it was a single zone RGB keyboard backlight with no special
>> effects.
>>
>> - There is an accompanying misc device with the sysfs attributes "name",
>> "device_type", "firmware_version_string", "serial_number" for device
>> identification and "use_leds_uapi" that defaults to 1.
>>
>> - If set to 0 the /sys/class/leds/* entry disappears. The driver should
>> keep the last state the backlight was in active if possible.
>>
>> - If set 1 it appears again. The driver should bring it back to a static
>> 1 zone setting while avoiding flicker if possible.
>>
>> - If the device is not controllable by for example hidraw, the misc device
>> might also implement additional ioctls or sysfs attributes to allow a more
>> complex low level control for the keyboard backlight. This is will be a
>> highly vendor specific UAPI.
> So in the OpenRGB issue thread
> https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/dynamic-lighting-devices
> aka HID LampArray was mentioned. I did dismiss it because I thought that is
> only relevant for firmware, but I now stumbled upon the Virtual HID Framework
> (VHF)
> https://learn.microsoft.com/en-us/windows-hardware/drivers/hid/virtual-hid-framework--vhf-
> and now I wonder if an equivalent exists for Linux? A quick search did not
> yield any results for me.
Is this what I have been searching for? https://docs.kernel.org/usb/gadget_hid.html
>
> If a virtual HID device is possible and the WMI interface can reasonably be
> mapped to the LampArray API this might be the best starting point:
>
> - Implement a Virtual HID device with LampArray
>
> - Implement LampArray in OpenRGB
>
> - (Optional) Implement a generic LampArray leds subsystem driver that maps to
> the single zone control and ads the use_leds_uapi sysfs switch to the virtual
> HID device
>
> - (Optional) Implement vendor specific controls for
> AutonomousMode/built-in-firmware-effects via custom HID commands
>
> - (Optional) Implement Virtual HID devices for actual HID devices that don't
> support LampArray in firmware (Open question: How to prevent userspace/OpenRGB
> from interacting with original HID when the virtual HID device is not in
> AutonomousMode? How to associate the original and virtual HID device to each
> other that userspace can easily recognize this relation? Or is it possible to
> add virtual HID commands on top of a real HID device, making it look exactly
> like the pure virtual devices for userspace?)
>
> The LampArray API hereby is made with the intention to be used for multi leds
> devices, like per-key-backlight keyboards, unlike the leds UAPI. And it is
> coming anyway with new RGB devices soon. So it would not conflict with a
> "don't introduce unnecessary UAPI interfaces" principle. Are there any plans
> already of Wrapping LampArray in some kind ioctl/sysfs API? Or just have it
> used via hidraw? Or was there no discussion about it till now?
>
> Regards,
>
> Werner
>
>>
>> - The actual logic interacting with this low level UAPI is implemented by
>> a userspace driver
>>
>> Implementation wise: For the creation of the misc device with the
>> use_leds_uapi switch a helper function/macro might be useful? Wonder if it
>> should go into leds.h, led-class-multicolor.h, or a new header file?
>>
>> - Out of my head it would look something like this:
>>
>> led_classdev_add_optional_misc_control(
>> struct led_classdev *led_cdev,
>> char* name,
>> char* device_type,
>> char* firmware_version_string,
>> char* serial_number,
>> void (*deregister_led)(struct led_classdev *led_cdev),
>> void (*reregister_led)(struct led_classdev *led_cdev))
>>
>> Let me know your thoughts and hopefully I can start implementing it soon for
>> one of our devices.
>>
>> Kind regards,
>>
>> Werner Sembach
>>
Powered by blists - more mailing lists