| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240320125727.5615-2-radu.sabau@analog.com>
Date: Wed, 20 Mar 2024 14:57:12 +0200
From: Radu Sabau <radu.sabau@...log.com>
To: Jean Delvare <jdelvare@...e.com>, Guenter Roeck <linux@...ck-us.net>,
"Rob
Herring" <robh@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>,
Delphine CC Chiu
<Delphine_CC_Chiu@...ynn.com>,
Radu Sabau <radu.sabau@...log.com>, <linux-hwmon@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-doc@...r.kernel.org>, <linux-i2c@...r.kernel.org>
Subject: [PATCH v3 2/2] hwmon: pmbus: adp1050: Add driver support
Add support for ADP1050 Digital Controller for Isolated Power Supplies
with PMBus interface Voltage, Current and Temperature Monitor.
The ADP1050 implements several features to enable a robust
system of parallel and redundant operation for customers who
require high availability. The device can measure voltage,
current and temperature that can be used in different
techniques to identify and safely shut down an erroneous
power supply in parallel operation mode.
Signed-off-by: Radu Sabau <radu.sabau@...log.com>
---
v3:
*No change.
v2:
*Remove mandatory chip unlocking from the probe function, as it is
a bit extreme.
*Remove iin_scale and vin_scale set in the probe function since it makes no
sense to force-override it (the user may use the chip's default or even
change it himself after the probe).
---
Documentation/hwmon/adp1050.rst | 65 +++++++++++++++++++++++++++++++++
Documentation/hwmon/index.rst | 1 +
drivers/hwmon/pmbus/Kconfig | 10 +++++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/adp1050.c | 58 +++++++++++++++++++++++++++++
5 files changed, 135 insertions(+)
create mode 100644 Documentation/hwmon/adp1050.rst
create mode 100644 drivers/hwmon/pmbus/adp1050.c
diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
new file mode 100644
index 000000000000..3281b096a53c
--- /dev/null
+++ b/Documentation/hwmon/adp1050.rst
@@ -0,0 +1,65 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adp1050
+=====================
+
+Supported chips:
+
+ * Analog Devices ADP1050
+
+ Prefix: 'adp1050'
+
+ Addresses scanned: I2C 0x70 - 0x77
+
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-
+sheets/ADP1050.pdf
+
+Authors:
+
+ - Radu Sabau <radu.sabau@...log.com>
+
+
+Description
+-----------
+
+This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
+Controller for Isolated Power Supply with PMBus interface.
+
+The ADP1050 is an advanced digital controller with a PMBus™
+interface targeting high density, high efficiency dc-to-dc power
+conversion used to monitor system temperatures, voltages and currents.
+Through the PMBus interface, the device can monitor input/output voltages,
+input current and temperature.
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate
+the devices explicitly.
+Please see Documentation/i2c/instantiating-devices.rst for details.
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+Sysfs Attributes
+----------------
+
+================= ========================================
+in1_label "vin"
+in1_input Measured input voltage
+in1_alarm Input voltage alarm
+in2_label "vout1"
+in2_input Measured output voltage
+in2_crit Critical maximum output voltage
+in2_crit_alarm Output voltage high alarm
+in2_lcrit Critical minimum output voltage
+in2_lcrit_alarm Output voltage critical low alarm
+curr1_label "iin"
+curr1_input Measured input current.
+curr1_alarm Input current alarm
+temp1_input Measured temperature
+temp1_crit Critical high temperature
+temp1_crit_alarm Chip temperature critical high alarm
+================= ========================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 1ca7a4fe1f8f..9a4fd576e6f6 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -33,6 +33,7 @@ Hardware Monitoring Kernel Drivers
adm1266
adm1275
adm9240
+ adp1050
ads7828
adt7410
adt7411
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 557ae0c414b0..38e794d83cc3 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -57,6 +57,16 @@ config SENSORS_ADM1275
This driver can also be built as a module. If so, the module will
be called adm1275.
+config SENSORS_ADP1050
+ tristate "Analog Devices ADP1050 digital controller for Power Supplies"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADP1050 digital controller for isolated power supply with
+ PMBus interface.
+
+ This driver can also be built as a module. If so, the module will
+ be called adp1050.
+
config SENSORS_BEL_PFE
tristate "Bel PFE Compatible Power Supplies"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index f14ecf03ad77..95a8dea5e5ed 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o
obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
+obj-$(CONFIG_SENSORS_ADP1050) += adp1050.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o
obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
new file mode 100644
index 000000000000..0a49bea8e13b
--- /dev/null
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Analog Devices ADP1050
+ *
+ * Copyright (C) 2024 Analog Devices, Inc.
+ */
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info adp1050_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = linear,
+ .format[PSC_CURRENT_IN] = linear,
+ .format[PSC_TEMPERATURE] = linear,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP
+ | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int adp1050_probe(struct i2c_client *client)
+{
+ return pmbus_do_probe(client, &adp1050_info);
+}
+
+static const struct i2c_device_id adp1050_id[] = {
+ {"adp1050", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, adp1050_id);
+
+static const struct of_device_id adp1050_of_match[] = {
+ { .compatible = "adi,adp1050"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, adp1050_of_match);
+
+static struct i2c_driver adp1050_driver = {
+ .driver = {
+ .name = "adp1050",
+ .of_match_table = adp1050_of_match,
+ },
+ .probe = adp1050_probe,
+ .id_table = adp1050_id,
+};
+module_i2c_driver(adp1050_driver);
+
+MODULE_AUTHOR("Radu Sabau <radu.sabau@...log.com>");
+MODULE_DESCRIPTION("Analog Devices ADP1050 HWMON PMBus Driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--
2.34.1
Powered by blists - more mailing lists