[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240322-mammary-boil-f9a4c347fba1@spud>
Date: Fri, 22 Mar 2024 17:54:08 +0000
From: Conor Dooley <conor@...nel.org>
To: Allen_Lin <allencl_lin@...mail.com>
Cc: dmitry.torokhov@...il.com, robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
jikos@...nel.org, benjamin.tissoires@...hat.com,
linux-input@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 1/4] dt-bindings: input: Add Himax HX83102J touchscreen
On Fri, Mar 22, 2024 at 04:56:03PM +0800, Allen_Lin wrote:
> Add the HX83102j touchscreen device tree bindings documents.
> HX83102j is a Himax TDDI touchscreen controller.
> It's power sequence should be bound with a lcm driver, thus it
> needs to be a panel follower. Others are the same as normal SPI
> touchscreen controller.
>
> Signed-off-by: Allen_Lin <allencl_lin@...mail.com>
note to self/Krzysztof/Rob:
There was a previous attempt at this kind of device. This version looks
better but might be incomplete given there's a bunch more properties in
that patchset:
https://lore.kernel.org/all/20231017091900.801989-1-tylor_yang@himax.corp-partner.google.com/
> ---
> .../input/touchscreen/himax,hx83102j.yaml | 73 +++++++++++++++++++
> MAINTAINERS | 6 ++
> 2 files changed, 79 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/himax,hx83102j.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83102j.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83102j.yaml
> new file mode 100644
> index 000000000000..6c0a1ebf8d91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83102j.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83102j.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Himax hx83102j touchscreen
> +
> +maintainers:
> + - Allen Lin <allencl_lin@...mail.com>
> +
> +description:
> + This Himax hx83102j touchscreen uses the spi protocol.
> +
> +allOf:
> + - $ref: /schemas/input/touchscreen/touchscreen.yaml#
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + const: himax,hx83102j
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + reset-gpios:
> + maxItems: 1
> +
> + spi-cpha: true
> +
> + spi-cpol: true
> +
> + spi-max-frequency: true
> +
> + panel: true
> +
> + himax,pid:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + PID for HID device, used to load correct firmware.
One thing I did comment on that old patchset is why you cannot just use
firmware-name here?
Cheers,
Conor.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - reset-gpios
> + - panel
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ap_ts: touchscreen@0 {
> + compatible = "himax,hx83102j";
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&touch_int0 &touch_reset>;
> + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
> + spi-cpha;
> + spi-cpol;
> + interrupt-parent = <&gpio1>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + panel = <&panel>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 43b39956694a..aa51c60fd66d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9669,6 +9669,12 @@ L: linux-kernel@...r.kernel.org
> S: Maintained
> F: drivers/misc/hisi_hikey_usb.c
>
> +HIMAX HID HX83102J TOUCHSCREEN
> +M: Allen Lin <allencl_lin@...mail.com>
> +L: linux-input@...r.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/input/touchscreen/himax,hx83102j.yaml
> +
> HIMAX HX83112B TOUCHSCREEN SUPPORT
> M: Job Noorman <job@...rman.info>
> L: linux-input@...r.kernel.org
> --
> 2.34.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists