| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<AS8PR04MB8676EFC46106A70FF5AA92618C312@AS8PR04MB8676.eurprd04.prod.outlook.com>
Date: Fri, 22 Mar 2024 08:05:58 +0000
From: Hongxing Zhu <hongxing.zhu@....com>
To: Frank Li <frank.li@....com>, Lucas Stach <l.stach@...gutronix.de>, Lorenzo
Pieralisi <lpieralisi@...nel.org>, Krzysztof Wilczyński
<kw@...ux.com>, Rob Herring <robh@...nel.org>, Bjorn Helgaas
<bhelgaas@...gle.com>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer
<s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, dl-linux-imx <linux-imx@....com>, Philipp
Zabel <p.zabel@...gutronix.de>, Liam Girdwood <lgirdwood@...il.com>, Mark
Brown <broonie@...nel.org>
CC: "linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "bpf@...r.kernel.org" <bpf@...r.kernel.org>
Subject: RE: [PATCH v2 6/6] PCI: imx: Config look up table(LUT) to support MSI
ITS and IOMMU for i.MX95
> -----Original Message-----
> From: Frank Li <frank.li@....com>
> Sent: 2024年3月5日 4:25
> To: Hongxing Zhu <hongxing.zhu@....com>; Lucas Stach
> <l.stach@...gutronix.de>; Lorenzo Pieralisi <lpieralisi@...nel.org>; Krzysztof
> Wilczyński <kw@...ux.com>; Rob Herring <robh@...nel.org>; Bjorn Helgaas
> <bhelgaas@...gle.com>; Shawn Guo <shawnguo@...nel.org>; Sascha Hauer
> <s.hauer@...gutronix.de>; Pengutronix Kernel Team <kernel@...gutronix.de>;
> Fabio Estevam <festevam@...il.com>; dl-linux-imx <linux-imx@....com>;
> Philipp Zabel <p.zabel@...gutronix.de>; Liam Girdwood
> <lgirdwood@...il.com>; Mark Brown <broonie@...nel.org>
> Cc: linux-pci@...r.kernel.org; imx@...ts.linux.dev;
> linux-arm-kernel@...ts.infradead.org; linux-kernel@...r.kernel.org;
> bpf@...r.kernel.org; Frank Li <frank.li@....com>
> Subject: [PATCH v2 6/6] PCI: imx: Config look up table(LUT) to support MSI ITS
> and IOMMU for i.MX95
>
> i.MX95 need config LUT to convert bpf to stream id. IOMMU and ITS use the
> same stream id. Check msi-map and smmu-map and make sure the same PCI bpf
> map to the same stream id. Then config LUT related registers.
>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> drivers/pci/controller/dwc/pcie-imx.c | 175
> ++++++++++++++++++++++++++++++++++
> 1 file changed, 175 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-imx.c
> b/drivers/pci/controller/dwc/pcie-imx.c
> index 922bbc0bc1bcd..8b698e1ec3c9e 100644
> --- a/drivers/pci/controller/dwc/pcie-imx.c
> +++ b/drivers/pci/controller/dwc/pcie-imx.c
> @@ -55,6 +55,22 @@
> #define IMX95_PE0_GEN_CTRL_3 0x1058
> #define IMX95_PCIE_LTSSM_EN BIT(0)
>
> +#define IMX95_PE0_LUT_ACSCTRL 0x1008
> +#define IMX95_PEO_LUT_RWA BIT(16)
> +#define IMX95_PE0_LUT_ENLOC GENMASK(4, 0)
> +
> +#define IMX95_PE0_LUT_DATA1 0x100c
> +#define IMX95_PE0_LUT_VLD BIT(31)
> +#define IMX95_PE0_LUT_DAC_ID GENMASK(10, 8)
> +#define IMX95_PE0_LUT_STREAM_ID GENMASK(5, 0)
> +
> +#define IMX95_PE0_LUT_DATA2 0x1010
> +#define IMX95_PE0_LUT_REQID GENMASK(31, 16)
> +#define IMX95_PE0_LUT_MASK GENMASK(15, 0)
> +
> +#define IMX95_SID_MASK GENMASK(5, 0)
> +#define IMX95_MAX_LUT 32
> +
> #define to_imx_pcie(x) dev_get_drvdata((x)->dev)
>
> enum imx_pcie_variants {
> @@ -217,6 +233,159 @@ static int imx95_pcie_init_phy(struct imx_pcie
> *imx_pcie)
> return 0;
> }
>
> +static int imx_pcie_update_lut(struct imx_pcie *imx_pcie, int index,
> +u16 reqid, u16 mask, u8 sid) {
> + struct dw_pcie *pci = imx_pcie->pci;
> + struct device *dev = pci->dev;
> + u32 data1, data2;
> +
> + if (sid >= 64) {
> + dev_err(dev, "Too big stream id: %d\n", sid);
> + return -EINVAL;
> + }
> +
> + data1 = FIELD_PREP(IMX95_PE0_LUT_DAC_ID, 0);
> + data1 |= FIELD_PREP(IMX95_PE0_LUT_STREAM_ID, sid);
> + data1 |= IMX95_PE0_LUT_VLD;
> +
> + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, data1);
> +
> + data2 = mask;
> + data2 |= FIELD_PREP(IMX95_PE0_LUT_REQID, reqid);
> +
> + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA2, data2);
> +
> + regmap_write(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_ACSCTRL, index);
> +
> + return 0;
> +}
> +
> +struct imx_of_map {
> + u32 bdf;
> + u32 phandle;
> + u32 sid;
> + u32 sid_len;
> +};
> +
> +static int imx_check_msi_and_smmmu(struct imx_pcie *imx_pcie,
> + struct imx_of_map *msi_map, u32 msi_size, u32
> msi_map_mask,
> + struct imx_of_map *smmu_map, u32 smmu_size, u32
> smmu_map_mask) {
> + struct dw_pcie *pci = imx_pcie->pci;
> + struct device *dev = pci->dev;
> + int i;
> +
> + if (msi_map && smmu_map) {
> + if (msi_size != smmu_size)
> + return -EINVAL;
> + if (msi_map_mask != smmu_map_mask)
> + return -EINVAL;
> +
> + for (i = 0; i < msi_size / sizeof(*msi_map); i++) {
> + if (msi_map->bdf != smmu_map->bdf) {
> + dev_err(dev, "bdf setting is not match\n");
> + return -EINVAL;
> + }
> + if ((msi_map->sid & IMX95_SID_MASK) != smmu_map->sid) {
> + dev_err(dev, "sid setting is not match\n");
> + return -EINVAL;
> + }
> + if ((msi_map->sid_len & IMX95_SID_MASK) !=
> smmu_map->sid_len) {
> + dev_err(dev, "sid_len setting is not match\n");
> + return -EINVAL;
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Simple static config lut according to dts settings DAC index and
> +stream ID used as a match result
> + * of LUT pre-allocated and used by PCIes.
> + *
> + * Currently stream ID from 32-64 for PCIe.
> + * 32-40: first PCI bus.
> + * 40-48: second PCI bus.
> + *
> + * DAC_ID is index of TRDC.DAC index, start from 2 at iMX95.
> + * ITS [pci(2bit): streamid(6bits)]
> + * pci 0 is 0
> + * pci 1 is 3
> + */
> +static int imx_pcie_config_sid(struct imx_pcie *imx_pcie) {
> + struct imx_of_map *msi_map = NULL, *smmu_map = NULL, *cur;
> + int i, j, lut_index, nr_map, msi_size = 0, smmu_size = 0;
> + u32 msi_map_mask = 0xffff, smmu_map_mask = 0xffff;
> + struct dw_pcie *pci = imx_pcie->pci;
> + struct device *dev = pci->dev;
> + u32 mask;
> + int size;
> +
> + of_get_property(dev->of_node, "msi-map", &msi_size);
> + if (msi_size) {
> + msi_map = devm_kzalloc(dev, msi_size, GFP_KERNEL);
> + if (!msi_map)
> + return -ENOMEM;
> +
> + if (of_property_read_u32_array(dev->of_node, "msi-map", (u32
> *)msi_map,
> + msi_size / sizeof(u32)))
> + return -EINVAL;
> +
> + of_property_read_u32(dev->of_node, "msi-map-mask",
> &msi_map_mask);
> + }
> +
> + cur = msi_map;
> + size = msi_size;
> + mask = msi_map_mask;
> +
> + of_get_property(dev->of_node, "iommu-map", &smmu_size);
> + if (smmu_size) {
> + smmu_map = devm_kzalloc(dev, smmu_size, GFP_KERNEL);
> + if (!smmu_map)
> + return -ENOMEM;
> +
> + if (of_property_read_u32_array(dev->of_node, "iommu-map", (u32
> *)smmu_map,
> + smmu_size / sizeof(u32)))
> + return -EINVAL;
> +
> + of_property_read_u32(dev->of_node, "smmu_map_mask",
> &smmu_map_mask);
Refer to Documentation/devicetree/bindings/pci/pci-iommu.txt.
It seems that the name of this property should be "iommu-map-mask".
Best Regards
Richard Zhu
> + }
> +
> + if (imx_check_msi_and_smmmu(imx_pcie, msi_map, msi_size,
> msi_map_mask,
> + smmu_map, smmu_size, smmu_map_mask))
> + return -EINVAL;
> +
> + if (!cur) {
> + cur = smmu_map;
> + size = smmu_size;
> + mask = smmu_map_mask;
> + }
> +
> + nr_map = size / (sizeof(*cur));
> +
> + lut_index = 0;
> + for (i = 0; i < nr_map; i++) {
> + for (j = 0; j < cur->sid_len; j++) {
> + imx_pcie_update_lut(imx_pcie, lut_index, cur->bdf + j, mask,
> + (cur->sid + j) & IMX95_SID_MASK);
> + lut_index++;
> + }
> + cur++;
> +
> + if (lut_index >= IMX95_MAX_LUT) {
> + dev_err(dev, "its-map/iommu-map exceed HW limiation\n");
> + return -EINVAL;
> + }
> + }
> +
> + devm_kfree(dev, smmu_map);
> + devm_kfree(dev, msi_map);
> +
> + return 0;
> +}
> +
> static void imx_pcie_configure_type(struct imx_pcie *imx_pcie) {
> const struct imx_pcie_drvdata *drvdata = imx_pcie->drvdata; @@ -950,6
> +1119,12 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
> goto err_phy_off;
> }
>
> + ret = imx_pcie_config_sid(imx_pcie);
> + if (ret < 0) {
> + dev_err(dev, "failed to config sid:%d\n", ret);
> + goto err_phy_off;
> + }
> +
> imx_setup_phy_mpll(imx_pcie);
>
> return 0;
>
> --
> 2.34.1
Powered by blists - more mailing lists