| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f8e4a364-a1b4-4b0e-905d-d3dde3557fe2@linaro.org>
Date: Fri, 22 Mar 2024 10:58:45 +0000
From: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To: Luca Weiss <luca.weiss@...rphone.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Liam Girdwood
<lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Wesley Cheng <quic_wcheng@...cinc.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-usb@...r.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Enable USB
role switching
On 22/03/2024 08:01, Luca Weiss wrote:
> Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
> USB PHY, so that USB role and orientation switching works.
>
> Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
> ---
> With this patch I'm not quite sure if the 'ports' are connected
> correctly, though functionally everything appears to work fine.
>
> On some other SoCs port@1 in qmpphy and a second port in dwc3 are
> connected together also - one port of USB 2.0 HS, one for USB 3.0 SS.
>
> Here I'm following sm8250's solution. Also checking the binding doc
> doesn't reveal anything useful.
I don't see a redriver on your schematics which appears to be the only
big difference to the qrb5165 reference.
https://www.fairphone.com/wp-content/uploads/2022/09/FP4_Information-for-repairers-and-recyclers.pdf
> ---
> arch/arm64/boot/dts/qcom/sm6350.dtsi | 25 ++++++++++
> arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 57 ++++++++++++++++++++++-
> 2 files changed, 81 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 24bcec3366ef..b267500467f0 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -1686,6 +1686,27 @@ usb_1_qmpphy: phy@...8000 {
> #phy-cells = <1>;
>
> status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_1_qmpphy_out: endpoint {};
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_1_qmpphy_dp_in: endpoint {};
> + };
> + };
> };
>
> dc_noc: interconnect@...0000 {
> @@ -1861,6 +1882,10 @@ usb_1_dwc3: usb@...0000 {
> snps,hird-threshold = /bits/ 8 <0x10>;
> phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
> phy-names = "usb2-phy", "usb3-phy";
> +
> + port {
> + usb_1_role_switch_out: endpoint {};
> + };
> };
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> index bc67e8c1fe4d..104f23ec322d 100644
> --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
> @@ -19,6 +19,7 @@
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/usb/pd.h>
> #include "sm7225.dtsi"
> #include "pm6150l.dtsi"
> #include "pm6350.dtsi"
> @@ -543,6 +544,50 @@ conn-therm@1 {
> };
> };
>
> +&pm7250b_typec {
> + vdd-pdphy-supply = <&vreg_l3a>;
> +
> + status = "okay";
> +
> + connector {
> + compatible = "usb-c-connector";
> +
> + power-role = "source";
> + data-role = "dual";
> + self-powered;
> +
> + source-pdos = <PDO_FIXED(5000, 1500,
> + PDO_FIXED_DUAL_ROLE |
> + PDO_FIXED_USB_COMM |
> + PDO_FIXED_DATA_SWAP)>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + pm7250b_role_switch_in: endpoint {
> + remote-endpoint = <&usb_1_role_switch_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + pm7250b_typec_mux_in: endpoint {
> + remote-endpoint = <&usb_1_qmpphy_out>;
> + };
> + };
> + };
> + };
> +};
> +
> +&pm7250b_vbus {
> + regulator-min-microamp = <500000>;
> + regulator-max-microamp = <1500000>;
> + status = "okay";
> +};
> +
> &pmk8350_rtc {
> status = "okay";
> };
> @@ -726,7 +771,12 @@ &usb_1 {
>
> &usb_1_dwc3 {
> maximum-speed = "super-speed";
> - dr_mode = "peripheral";
> + dr_mode = "otg";
> + usb-role-switch;
> +};
> +
> +&usb_1_role_switch_out {
> + remote-endpoint = <&pm7250b_role_switch_in>;
> };
>
> &usb_1_hsphy {
> @@ -740,10 +790,15 @@ &usb_1_hsphy {
> &usb_1_qmpphy {
> vdda-phy-supply = <&vreg_l22a>;
> vdda-pll-supply = <&vreg_l16a>;
> + orientation-switch;
>
> status = "okay";
> };
>
> +&usb_1_qmpphy_out {
> + remote-endpoint = <&pm7250b_typec_mux_in>;
> +};
> +
> &wifi {
> vdd-0.8-cx-mx-supply = <&vreg_l4a>;
> vdd-1.8-xo-supply = <&vreg_l7a>;
>
This looks consistent with 8250
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Powered by blists - more mailing lists