linux-kernel - [PATCH v4 1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240324-x1e80100-display-refactor-connector-v4-1-e0ebaea66a78@linaro.org>
Date: Sun, 24 Mar 2024 20:56:51 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Rob Clark <robdclark@...il.com>, 
 Abhinav Kumar <quic_abhinavk@...cinc.com>, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, Sean Paul <sean@...rly.run>, 
 Marijn Suijten <marijn.suijten@...ainline.org>, 
 David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>, 
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, Kuogee Hsieh <quic_khsieh@...cinc.com>, 
 Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, 
 Dmitry Baryshkov <dmitry.baryshkov@...aro.org>, 
 Johan Hovold <johan@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org, 
 freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v4 1/2] drm/msm/dp: Add support for determining the eDP/DP
 mode from DT

Instead of relying on different compatibles for eDP and DP, lookup
the panel node in devicetree to figure out the connector type and
then pass on that information to the PHY. External DP doesn't have
a panel described in DT, therefore, assume it's eDP if panel node
is present.

Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c4cb82af5c2f..9169a739cc54 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -726,6 +726,14 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
 	if (IS_ERR(phy))
 		return PTR_ERR(phy);
 
+	rc = phy_set_mode_ext(phy, PHY_MODE_DP,
+			      dp->dp_display.is_edp ? PHY_SUBMODE_EDP : PHY_SUBMODE_DP);
+	if (rc) {
+		DRM_ERROR("failed to set phy submode, rc = %d\n", rc);
+		dp->catalog = NULL;
+		goto error;
+	}
+
 	dp->catalog = dp_catalog_get(dev);
 	if (IS_ERR(dp->catalog)) {
 		rc = PTR_ERR(dp->catalog);
@@ -1241,6 +1249,25 @@ static int dp_auxbus_done_probe(struct drm_dp_aux *aux)
 	return dp_display_probe_tail(aux->dev);
 }
 
+static int dp_display_get_connector_type(struct platform_device *pdev,
+					 const struct msm_dp_desc *desc)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *aux_bus = of_get_child_by_name(node, "aux-bus");
+	struct device_node *panel = of_get_child_by_name(aux_bus, "panel");
+	int connector_type;
+
+	if (panel)
+		connector_type = DRM_MODE_CONNECTOR_eDP;
+	else
+		connector_type = DRM_MODE_SUBCONNECTOR_DisplayPort;
+
+	of_node_put(panel);
+	of_node_put(aux_bus);
+
+	return connector_type;
+}
+
 static int dp_display_probe(struct platform_device *pdev)
 {
 	int rc = 0;
@@ -1263,7 +1290,7 @@ static int dp_display_probe(struct platform_device *pdev)
 	dp->dp_display.pdev = pdev;
 	dp->name = "drm_dp";
 	dp->id = desc->id;
-	dp->dp_display.connector_type = desc->connector_type;
+	dp->dp_display.connector_type = dp_display_get_connector_type(pdev, desc);
 	dp->wide_bus_supported = desc->wide_bus_supported;
 	dp->dp_display.is_edp =
 		(dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP);

-- 
2.34.1