lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240324223455.1342824-89-sashal@kernel.org>
Date: Sun, 24 Mar 2024 18:24:27 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Sriram R <quic_srirrama@...cinc.com>,
	Jeff Johnson <quic_jjohnson@...cinc.com>,
	Kalle Valo <quic_kvalo@...cinc.com>,
	Sasha Levin <sashal@...nel.org>
Subject: [PATCH 6.8 088/715] wifi: ath12k: Fix issues in channel list update

From: Sriram R <quic_srirrama@...cinc.com>

[ Upstream commit 67a48d937fac917947540c9f89630d472cd61fcb ]

Currently, the logic used to select the 6 GHz band is incorrect,
which may cause 6 GHz supported channels to not be updated properly.
This is because the 6 GHz Max frequency supported by the driver is
being compared to the Max frequency supported on the board. If in
some cases, the 6 GHz Max frequency supported on the board is less
than the defined 6 GHz Max frequency, all 6 GHz channels are disabled.
To address this, compare the max frequency supported by the board to
the defined 6 GHz Minimum frequency by the driver.

Similarly, when a dual mac card supports both 6 GHz and 5 GHz radios,
if the 5 GHz radio gets enumerated first before 6 GHz, the checks in
ath12k_mac_setup_channels_rates() can cause the 5 GHz channels which
were enabled earlier to get disabled when the 6 GHz channel list is
updated. This is because the Min 6 GHz frequency defined in the driver
is 5945 MHz, which should be 5925 MHz since channel 2 is not considered
currently, but the firmware can pass 5925 MHz as the minimum.
Hence, update the Min frequency supported by the driver to 5925 MHz.

In addition, ensure that the channel list update to firmware updates
only the channels that the current radio (ar) supports rather than
considering the wiphy support. This would be required when multiple pdevs
are supported in a wiphy and they support different ranges of frequencies
or bands as in single wiphy support.

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama@...cinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@...cinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@...cinc.com>
Link: https://msgid.link/20240117062628.8260-1-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/wireless/ath/ath12k/core.h | 2 +-
 drivers/net/wireless/ath/ath12k/mac.c  | 2 +-
 drivers/net/wireless/ath/ath12k/reg.c  | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index 8458dc292821a..01fb9b2ae4314 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -420,7 +420,7 @@ struct ath12k_sta {
 };
 
 #define ATH12K_MIN_5G_FREQ 4150
-#define ATH12K_MIN_6G_FREQ 5945
+#define ATH12K_MIN_6G_FREQ 5925
 #define ATH12K_MAX_6G_FREQ 7115
 #define ATH12K_NUM_CHANS 100
 #define ATH12K_MAX_5G_CHAN 173
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 88cec54c6c2e6..f4e5dc363472b 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -7198,7 +7198,7 @@ static int ath12k_mac_setup_channels_rates(struct ath12k *ar,
 	}
 
 	if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
-		if (reg_cap->high_5ghz_chan >= ATH12K_MAX_6G_FREQ) {
+		if (reg_cap->high_5ghz_chan >= ATH12K_MIN_6G_FREQ) {
 			channels = kmemdup(ath12k_6ghz_channels,
 					   sizeof(ath12k_6ghz_channels), GFP_KERNEL);
 			if (!channels) {
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index f924bc13ccff5..29542c46b0941 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -103,7 +103,7 @@ int ath12k_reg_update_chan_list(struct ath12k *ar)
 
 	bands = hw->wiphy->bands;
 	for (band = 0; band < NUM_NL80211_BANDS; band++) {
-		if (!bands[band])
+		if (!(ar->mac.sbands[band].channels && bands[band]))
 			continue;
 
 		for (i = 0; i < bands[band]->n_channels; i++) {
@@ -129,7 +129,7 @@ int ath12k_reg_update_chan_list(struct ath12k *ar)
 	ch = arg->channel;
 
 	for (band = 0; band < NUM_NL80211_BANDS; band++) {
-		if (!bands[band])
+		if (!(ar->mac.sbands[band].channels && bands[band]))
 			continue;
 
 		for (i = 0; i < bands[band]->n_channels; i++) {
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ