linux-kernel - [PATCH 5.4 061/183] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240324234638.1355609-62-sashal@kernel.org>
Date: Sun, 24 Mar 2024 19:44:34 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Michal Vokáč <michal.vokac@...ft.com>,
	Andrew Lunn <andrew@...n.ch>,
	Shawn Guo <shawnguo@...nel.org>,
	Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.4 061/183] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address

From: Michal Vokáč <michal.vokac@...ft.com>

[ Upstream commit 023bd910d3ab735459f84b22bb99fb9e00bd9d76 ]

This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.

Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 4d1e65c307f86..e86f409ca8801 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -118,7 +118,7 @@ phy_port3: phy@2 {
 
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
-- 
2.43.0