| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240324224720.1345309-115-sashal@kernel.org>
Date: Sun, 24 Mar 2024 18:37:20 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
stable@...r.kernel.org
Cc: Yu Kuai <yukuai3@...wei.com>,
Song Liu <song@...nel.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 6.7 114/713] md/raid1: factor out helpers to add rdev to conf
From: Yu Kuai <yukuai3@...wei.com>
[ Upstream commit 969d6589abcb369d53d84ec7c9c37f4b23ec1ad9 ]
There are no functional changes, just make code cleaner and prepare to
record disk non-rotational information while adding and removing rdev to
conf
Signed-off-by: Yu Kuai <yukuai3@...wei.com>
Signed-off-by: Song Liu <song@...nel.org>
Link: https://lore.kernel.org/r/20240229095714.926789-3-yukuai1@huaweicloud.com
Stable-dep-of: 257ac239ffcf ("md/raid1: fix choose next idle in read_balance()")
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/md/raid1.c | 85 +++++++++++++++++++++++++++++-----------------
1 file changed, 53 insertions(+), 32 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 71bd372c14e2c..57e2487a03507 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1761,6 +1761,44 @@ static int raid1_spare_active(struct mddev *mddev)
return count;
}
+static bool raid1_add_conf(struct r1conf *conf, struct md_rdev *rdev, int disk,
+ bool replacement)
+{
+ struct raid1_info *info = conf->mirrors + disk;
+
+ if (replacement)
+ info += conf->raid_disks;
+
+ if (info->rdev)
+ return false;
+
+ rdev->raid_disk = disk;
+ info->head_position = 0;
+ info->seq_start = MaxSector;
+ WRITE_ONCE(info->rdev, rdev);
+
+ return true;
+}
+
+static bool raid1_remove_conf(struct r1conf *conf, int disk)
+{
+ struct raid1_info *info = conf->mirrors + disk;
+ struct md_rdev *rdev = info->rdev;
+
+ if (!rdev || test_bit(In_sync, &rdev->flags) ||
+ atomic_read(&rdev->nr_pending))
+ return false;
+
+ /* Only remove non-faulty devices if recovery is not possible. */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ rdev->mddev->recovery_disabled != conf->recovery_disabled &&
+ rdev->mddev->degraded < conf->raid_disks)
+ return false;
+
+ WRITE_ONCE(info->rdev, NULL);
+ return true;
+}
+
static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
{
struct r1conf *conf = mddev->private;
@@ -1796,15 +1834,13 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
- p->head_position = 0;
- rdev->raid_disk = mirror;
+ raid1_add_conf(conf, rdev, mirror, false);
err = 0;
/* As all devices are equivalent, we don't need a full recovery
* if this was recently any drive of the array
*/
if (rdev->saved_raid_disk < 0)
conf->fullsync = 1;
- WRITE_ONCE(p->rdev, rdev);
break;
}
if (test_bit(WantReplacement, &p->rdev->flags) &&
@@ -1814,13 +1850,11 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
if (err && repl_slot >= 0) {
/* Add this device as a replacement */
- p = conf->mirrors + repl_slot;
clear_bit(In_sync, &rdev->flags);
set_bit(Replacement, &rdev->flags);
- rdev->raid_disk = repl_slot;
+ raid1_add_conf(conf, rdev, repl_slot, true);
err = 0;
conf->fullsync = 1;
- WRITE_ONCE(p[conf->raid_disks].rdev, rdev);
}
print_conf(conf);
@@ -1837,27 +1871,20 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
if (unlikely(number >= conf->raid_disks))
goto abort;
- if (rdev != p->rdev)
- p = conf->mirrors + conf->raid_disks + number;
+ if (rdev != p->rdev) {
+ number += conf->raid_disks;
+ p = conf->mirrors + number;
+ }
print_conf(conf);
if (rdev == p->rdev) {
- if (test_bit(In_sync, &rdev->flags) ||
- atomic_read(&rdev->nr_pending)) {
- err = -EBUSY;
- goto abort;
- }
- /* Only remove non-faulty devices if recovery
- * is not possible.
- */
- if (!test_bit(Faulty, &rdev->flags) &&
- mddev->recovery_disabled != conf->recovery_disabled &&
- mddev->degraded < conf->raid_disks) {
+ if (!raid1_remove_conf(conf, number)) {
err = -EBUSY;
goto abort;
}
- WRITE_ONCE(p->rdev, NULL);
- if (conf->mirrors[conf->raid_disks + number].rdev) {
+
+ if (number < conf->raid_disks &&
+ conf->mirrors[conf->raid_disks + number].rdev) {
/* We just removed a device that is being replaced.
* Move down the replacement. We drain all IO before
* doing this to avoid confusion.
@@ -3000,23 +3027,17 @@ static struct r1conf *setup_conf(struct mddev *mddev)
err = -EINVAL;
spin_lock_init(&conf->device_lock);
+ conf->raid_disks = mddev->raid_disks;
rdev_for_each(rdev, mddev) {
int disk_idx = rdev->raid_disk;
- if (disk_idx >= mddev->raid_disks
- || disk_idx < 0)
+
+ if (disk_idx >= conf->raid_disks || disk_idx < 0)
continue;
- if (test_bit(Replacement, &rdev->flags))
- disk = conf->mirrors + mddev->raid_disks + disk_idx;
- else
- disk = conf->mirrors + disk_idx;
- if (disk->rdev)
+ if (!raid1_add_conf(conf, rdev, disk_idx,
+ test_bit(Replacement, &rdev->flags)))
goto abort;
- disk->rdev = rdev;
- disk->head_position = 0;
- disk->seq_start = MaxSector;
}
- conf->raid_disks = mddev->raid_disks;
conf->mddev = mddev;
INIT_LIST_HEAD(&conf->retry_list);
INIT_LIST_HEAD(&conf->bio_end_io_list);
--
2.43.0
Powered by blists - more mailing lists