linux-kernel - [PATCH 5.10 073/238] ARM: dts: imx6dl-yapp4: Move phy reset into switch node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240324234027.1354210-74-sashal@kernel.org>
Date: Sun, 24 Mar 2024 19:37:41 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Michal Vokáč <michal.vokac@...ft.com>,
	Shawn Guo <shawnguo@...nel.org>,
	Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.10 073/238] ARM: dts: imx6dl-yapp4: Move phy reset into switch node

From: Michal Vokáč <michal.vokac@...ft.com>

[ Upstream commit 7da7b84fee58c85a6075022023d31edea40e81a1 ]

Drop the phy-reset-duration and phy-reset-gpios deprecated properties and
move reset-gpios under the switch node.

Signed-off-by: Michal Vokáč <michal.vokac@...ft.com>
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Stable-dep-of: 023bd910d3ab ("ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address")
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index ebc0892e37c7a..f18da2b70fdc9 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -103,8 +103,6 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -128,6 +126,7 @@ phy_port3: phy@2 {
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
-- 
2.43.0