[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240324224720.1345309-541-sashal@kernel.org>
Date: Sun, 24 Mar 2024 18:44:26 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
stable@...r.kernel.org
Cc: Ondrej Jirman <megi@....cz>,
Lee Jones <lee@...nel.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 6.7 540/713] leds: sgm3140: Add missing timer cleanup and flash gpio control
From: Ondrej Jirman <megi@....cz>
[ Upstream commit 205c29887a333ee4b37596e6533373e38cb23947 ]
Enabling strobe and then setting brightness to 0 causes the driver to enter
invalid state after strobe end timer fires. We should cancel strobe mode
resources when changing brightness (aka torch mode).
Fixes: cef8ec8cbd21 ("leds: add sgm3140 driver")
Signed-off-by: Ondrej Jirman <megi@....cz>
Link: https://lore.kernel.org/r/20240217191133.1757553-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/leds/flash/leds-sgm3140.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/leds/flash/leds-sgm3140.c b/drivers/leds/flash/leds-sgm3140.c
index eb648ff54b4e5..db0ac6641954e 100644
--- a/drivers/leds/flash/leds-sgm3140.c
+++ b/drivers/leds/flash/leds-sgm3140.c
@@ -114,8 +114,11 @@ static int sgm3140_brightness_set(struct led_classdev *led_cdev,
"failed to enable regulator: %d\n", ret);
return ret;
}
+ gpiod_set_value_cansleep(priv->flash_gpio, 0);
gpiod_set_value_cansleep(priv->enable_gpio, 1);
} else {
+ del_timer_sync(&priv->powerdown_timer);
+ gpiod_set_value_cansleep(priv->flash_gpio, 0);
gpiod_set_value_cansleep(priv->enable_gpio, 0);
ret = regulator_disable(priv->vin_regulator);
if (ret) {
--
2.43.0
Powered by blists - more mailing lists