lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <cover.1711373653.git.donettom@linux.ibm.com>
Date: Mon, 25 Mar 2024 09:24:12 -0500
From: Donet Tom <donettom@...ux.ibm.com>
To: Andrew Morton <akpm@...ux-foundation.org>, linux-mm@...ck.org,
        linux-kernel@...r.kernel.org
Cc: Aneesh Kumar <aneesh.kumar@...nel.org>, Huang Ying <ying.huang@...el.com>,
        Michal Hocko <mhocko@...nel.org>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Mel Gorman <mgorman@...e.de>, Feng Tang <feng.tang@...el.com>,
        Andrea Arcangeli <aarcange@...hat.com>,
        Peter Zijlstra <peterz@...radead.org>, Ingo Molnar <mingo@...hat.com>,
        Rik van Riel <riel@...riel.com>, Johannes Weiner <hannes@...xchg.org>,
        Matthew Wilcox <willy@...radead.org>, Vlastimil Babka <vbabka@...e.cz>,
        Dan Williams <dan.j.williams@...el.com>,
        Hugh Dickins <hughd@...gle.com>,
        Kefeng Wang <wangkefeng.wang@...wei.com>,
        Suren Baghdasaryan <surenb@...gle.com>,
        Donet Tom <donettom@...ux.ibm.com>
Subject: [PATCH v4 0/2] Allow migrate on protnone reference with MPOL_PREFERRED_MANY policy

This patchset is to optimize the cross-socket memory access with
MPOL_PREFERRED_MANY policy.

To test this patch we ran the following test on a 3 node system.
 Node 0 - 2GB   - Tier 1
 Node 1 - 11GB  - Tier 1
 Node 6 - 10GB  - Tier 2

Below changes are made to memcached to set the memory policy,
It select Node0 and Node1 as preferred nodes.

   #include <numaif.h>
   #include <numa.h>

    unsigned long nodemask;
    int ret;

    nodemask = 0x03;
    ret = set_mempolicy(MPOL_PREFERRED_MANY | MPOL_F_NUMA_BALANCING,
                                               &nodemask, 10);
    /* If MPOL_F_NUMA_BALANCING isn't supported,
     * fall back to MPOL_PREFERRED_MANY */
    if (ret < 0 && errno == EINVAL){
       printf("set mem policy normal\n");
        ret = set_mempolicy(MPOL_PREFERRED_MANY, &nodemask, 10);
    }
    if (ret < 0) {
       perror("Failed to call set_mempolicy");
       exit(-1);
    }

Test Procedure:
===============
1. Make sure memory tiering and demotion are enabled.
2. Start memcached.

   # ./memcached -b 100000 -m 204800 -u root -c 1000000 -t 7
       -d -s "/tmp/memcached.sock"

3. Run memtier_benchmark to store 3200000 keys.

  #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary
    --threads=1 --pipeline=1 --ratio=1:0 --key-pattern=S:S --key-minimum=1
    --key-maximum=3200000 -n allkeys -c 1 -R -x 1 -d 1024

4. Start a memory eater on node 0 and 1. This will demote all memcached
   pages to node 6.
5. Make sure all the memcached pages got demoted to lower tier by reading
   /proc/<memcaced PID>/numa_maps.

    # cat /proc/2771/numa_maps
     ---
    default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64
    default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64
     ---

6. Kill memory eater.
7. Read the pgpromote_success counter.
8. Start reading the keys by running memtier_benchmark.

  #./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary
   --pipeline=1 --distinct-client-seed --ratio=0:3 --key-pattern=R:R
   --key-minimum=1 --key-maximum=3200000 -n allkeys
   --threads=64 -c 1 -R -x 6

9. Read the pgpromote_success counter.

Test Results:
=============
Without Patch
------------------
1. pgpromote_success  before test
Node 0:  pgpromote_success 11
Node 1:  pgpromote_success 140974

pgpromote_success  after test
Node 0:  pgpromote_success 11
Node 1:  pgpromote_success 140974

2. Memtier-benchmark result.
AGGREGATED AVERAGE RESULTS (6 runs)
==================================================================
Type    Ops/sec   Hits/sec   Misses/sec  Avg. Latency  p50 Latency
------------------------------------------------------------------
Sets     0.00       ---         ---        ---          ---
Gets    305792.03  305791.93   0.10       0.18949       0.16700
Waits    0.00       ---         ---        ---          ---
Totals  305792.03  305791.93   0.10       0.18949       0.16700

======================================
p99 Latency  p99.9 Latency  KB/sec
-------------------------------------
---          ---            0.00
0.44700     1.71100        11542.69
---           ---            ---
0.44700     1.71100        11542.69

With Patch
---------------
1. pgpromote_success  before test
Node 0:  pgpromote_success 5
Node 1:  pgpromote_success 89386

pgpromote_success  after test
Node 0:  pgpromote_success 57895
Node 1:  pgpromote_success 141463

2. Memtier-benchmark result.
AGGREGATED AVERAGE RESULTS (6 runs)
====================================================================
Type    Ops/sec    Hits/sec  Misses/sec  Avg. Latency  p50 Latency
--------------------------------------------------------------------
Sets     0.00        ---       ---        ---           ---
Gets    521942.24  521942.07  0.17       0.11459        0.10300
Waits    0.00        ---       ---         ---          ---
Totals  521942.24  521942.07  0.17       0.11459        0.10300

=======================================
p99 Latency  p99.9 Latency  KB/sec
---------------------------------------
 ---          ---            0.00
0.23100      0.31900        19701.68
---          ---             ---
0.23100      0.31900        19701.68


Test Result Analysis:
=====================
1. With patch we could observe pages are getting promoted.
2. Memtier-benchmark results shows that, with the patch,
   performance has increased more than 50%.

 Ops/sec without fix -  305792.03
 Ops/sec with fix    -  521942.24

Changes:
V4
- Added an example in the "PATCH 2/2" commit message as per the discussion
  from V3.
V3:
- Added "* @vmf: structure describing the fault" comment for
  mpol_misplaced() to fix the warning.
https://lore.kernel.org/oe-kbuild-all/202403202229.WZeAnUuO-lkp@intel.com/
-https://lore.kernel.org/lkml/cover.1711002865.git.donettom@linux.ibm.com/
v2:
- Rebased on latest upstream (v6.8-rc7)
- Used 'numa_node_id()' to get the current execution node ID, Added
  'lockdep_assert_held' to make sure that the 'mpol_misplaced()' is
  called with ptl held.
- The migration condition has been updated; now, migration will only
  occur if the execution node is present in the policy nodemask.
-https://lore.kernel.org/lkml/cover.1709909210.git.donettom@linux.ibm.com/

-v1: https://lore.kernel.org/linux-mm/9c3f7b743477560d1c5b12b8c111a584a2cc92ee.1708097962.git.donettom@linux.ibm.com/#t


Donet Tom (2):
  mm/mempolicy: Use numa_node_id() instead of cpu_to_node()
  mm/numa_balancing:Allow migrate on protnone reference with
    MPOL_PREFERRED_MANY policy

 include/linux/mempolicy.h |  5 +++--
 mm/huge_memory.c          |  2 +-
 mm/internal.h             |  2 +-
 mm/memory.c               |  8 +++++---
 mm/mempolicy.c            | 36 +++++++++++++++++++++++++++---------
 5 files changed, 37 insertions(+), 16 deletions(-)

-- 
2.39.3


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ