[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240325153356.46112-2-l.rubusch@gmail.com>
Date: Mon, 25 Mar 2024 15:33:50 +0000
From: Lothar Rubusch <l.rubusch@...il.com>
To: lars@...afoo.de,
Michael.Hennerich@...log.com,
jic23@...nel.org,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org
Cc: linux-iio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
eraretuya@...il.com,
l.rubusch@...il.com
Subject: [PATCH v4 1/7] iio: accel: adxl345: Make data_range obsolete
Replace write() data_format by regmap_update_bits(), because
bus specific pre-configuration may have happened before on
the same register. Changes then need to be masked.
Remove the data_range field from the struct adxl345_data,
because it is not used anymore.
Signed-off-by: Lothar Rubusch <l.rubusch@...il.com>
---
drivers/iio/accel/adxl345_core.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 8bd30a23e..be6758015 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -42,13 +42,13 @@
#define ADXL345_DATA_FORMAT_4G 1
#define ADXL345_DATA_FORMAT_8G 2
#define ADXL345_DATA_FORMAT_16G 3
+#define ADXL345_DATA_FORMAT_MSK ~((u8) BIT(6)) /* ignore spi-3wire */
#define ADXL345_DEVID 0xE5
struct adxl345_data {
const struct adxl345_chip_info *info;
struct regmap *regmap;
- u8 data_range;
};
#define ADXL345_CHANNEL(index, axis) { \
@@ -219,14 +219,13 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap)
data = iio_priv(indio_dev);
data->regmap = regmap;
/* Enable full-resolution mode */
- data->data_range = ADXL345_DATA_FORMAT_FULL_RES;
data->info = device_get_match_data(dev);
if (!data->info)
return -ENODEV;
- ret = regmap_write(data->regmap, ADXL345_REG_DATA_FORMAT,
- data->data_range);
- if (ret < 0)
+ ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
+ ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
+ if (ret)
return dev_err_probe(dev, ret, "Failed to set data range\n");
indio_dev->name = data->info->name;
--
2.25.1
Powered by blists - more mailing lists