[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <171148006675.3222706.1993091559957014299.robh@kernel.org>
Date: Tue, 26 Mar 2024 14:12:03 -0500
From: Rob Herring <robh@...nel.org>
To: Gabor Juhos <j4g8y7@...il.com>
Cc: devicetree@...r.kernel.org, Konrad Dybcio <konrad.dybcio@...aro.org>,
Conor Dooley <conor.dooley@...rochip.com>, linux-arm-msm@...r.kernel.org,
Bjorn Andersson <andersson@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-kernel@...r.kernel.org, Conor Dooley <conor+dt@...nel.org>
Subject: Re: [PATCH v4 0/2] arm64: add minimal boot support for TP-Link
Archer AX55 v1
On Tue, 26 Mar 2024 15:52:26 +0100, Gabor Juhos wrote:
> The purpose of this series to add minimal boot support for the
> TP-Link Archer AX55 v1 dual-band wireless router.
>
> There are two patches:
> - the first one adds the compatible for the board into the dt-bindings
> documentation,
> - the second patch introduces a minimal device tree source which can be
> used for booting initramfs images
>
> ---
> Changes in v4:
> - change patch 2/2 to use new LED_FUNCTION_* definitions introduced
> in v6.9-rc1
> - rebase on top of v6.9-rc1
> - Link to v3: https://lore.kernel.org/r/20240313-archer-ax55-v1-v3-0-cd9402efab59@gmail.com
>
> Changes in v3:
> - change pin configuration to use "gpio20" and "gpio21" for UART pins
> in patch 2/2
> - rebase on top of v6.8
> - Link to v2: https://lore.kernel.org/r/20240226-archer-ax55-v1-v2-0-3776eb61f432@gmail.com
>
> Changes in v2:
> - reorder pin configuration properties in patch 2/2
> - add 'Acked-by' tag to patch 1/2
> - Link to v1: https://lore.kernel.org/r/20240223-archer-ax55-v1-v1-0-99f8fa2c3858@gmail.com
>
> ---
> Gabor Juhos (2):
> dt-bindings: arm: qcom: add TP-Link Archer AX55 v1
> arm64: dts: qcom: add TP-Link Archer AX55 v1
>
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts | 128 +++++++++++++++++++++
> 3 files changed, 130 insertions(+)
> ---
> base-commit: b55a22fa35e9d4e07d3ee6ab2557a41c2711433b
> change-id: 20240221-archer-ax55-v1-73ed91a97c6e
>
> Best regards,
> --
> Gabor Juhos <j4g8y7@...il.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/ipq5018-tplink-archer-ax55-v1.dtb' for 20240326-archer-ax55-v1-v4-0-dc5b54a4bb00@...il.com:
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupts: [[0, 62, 4]] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupt-names: ['hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupts: [[0, 62, 4]] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupt-names:0: 'pwr_event' was expected
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupt-names: ['hs_phy_irq'] is too short
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
Powered by blists - more mailing lists