[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2722214.mvXUDI8C0e@jernej-laptop>
Date: Tue, 26 Mar 2024 23:16:42 +0100
From: Jernej Škrabec <jernej.skrabec@...il.com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Samuel Holland <samuel@...lland.org>, Corentin Labbe <clabbe@...libre.com>,
Maxime Ripard <mripard@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject:
Re: [PATCH 1/4] arm64: dts: allwinner: Pine H64: correctly remove
reg_gmac_3v3
Dne nedelja, 17. marec 2024 ob 19:41:27 CET je Krzysztof Kozlowski napisal(a):
> There is no "reg_gmac_3v3" device node in sun50i-h6-pine-h64.dts,
> although there is "gmac-3v3" with "reg_gmac_3v3" label, so let's assume
> author wanted to remove that node. Delete node via phandle, not via
> full node path, to fix this.
>
> Fixes: f33a91175029 ("arm64: dts: allwinner: add pineh64 model B")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Best regards,
Jernej
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
> index b710f1a0f53a..1b6e5595ac6e 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
> @@ -5,12 +5,12 @@
>
> #include "sun50i-h6-pine-h64.dts"
>
> +/delete-node/ ®_gmac_3v3;
> +
> / {
> model = "Pine H64 model B";
> compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
>
> - /delete-node/ reg_gmac_3v3;
> -
> wifi_pwrseq: wifi_pwrseq {
> compatible = "mmc-pwrseq-simple";
> reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
>
Powered by blists - more mailing lists