linux-kernel - Re: [PATCH] usb: Disable USB3 LPM at shutdown

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <2024032639-deny-boggle-276e@gregkh>
Date: Tue, 26 Mar 2024 06:56:49 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: Kai-Heng Feng <kai.heng.feng@...onical.com>
Cc: stern@...land.harvard.edu, mathias.nyman@...ux.intel.com,
	oneukum@...e.com, Roy Luo <royluo@...gle.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
	linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] usb: Disable USB3 LPM at shutdown

On Tue, Mar 05, 2024 at 02:51:38PM +0800, Kai-Heng Feng wrote:
> SanDisks USB3 storage may disapper after system reboot:
> 
> usb usb2-port3: link state change
> xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
> usb usb2-port3: do warm reset, port only
> xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0
> usb usb2-port3: not warm reset yet, waiting 50ms
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0
> usb usb2-port3: not warm reset yet, waiting 200ms
> ...
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0
> usb usb2-port3: not warm reset yet, waiting 200ms
> xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0
> xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0
> xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0
> usb usb2-port3: not enabled, trying warm reset again...
> 
> This is due to the USB device still cause port change event after xHCI is
> shuted down:
> 
> xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001
> xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling.
> xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling
> xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling
> xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0
> xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling.
> xhci_hcd 0000:38:00.0: // Halt the HC
> xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1
> xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling.
> xhci_hcd 0000:00:14.0: // Halt the HC
> xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203
> xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status  = 0x1311
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203
> xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203
> xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203
> xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203
> xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203
> usb 2-3: device not accepting address 2, error -108
> xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command
> xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263
> xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status  = 0x1271
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1
> usb usb2-port3: not reset yet, waiting 60ms
> ACPI: PM: Preparing to enter system sleep state S5
> xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1
> usb usb2-port3: not reset yet, waiting 200ms
> reboot: Restarting system
> 
> The port change event is caused by LPM transition, so disabling LPM at shutdown
> to make sure the device is in U0 for warmboot.
> 
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> ---
>  drivers/usb/core/port.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

What commit id does this fix?