linux-kernel - Re: [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <43918921-0d05-41d3-a19b-f137314e868d@canonical.com>
Date: Thu, 28 Mar 2024 22:28:28 +0100
From: Heinrich Schuchardt <heinrich.schuchardt@...onical.com>
To: Jisheng Zhang <jszhang@...nel.org>
Cc: Rob Herring <robh+dt@...nel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
 Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt
 <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
 Emil Renner Berthing <kernel@...il.dk>, linux-riscv@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 Conor Dooley <conor@...nel.org>, Aurelien Jarno <aurelien@...el32.net>
Subject: Re: [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device
 tree

On 2/6/24 20:13, Conor Dooley wrote:
> On Wed, Jan 31, 2024 at 09:26:00PM +0800, Jisheng Zhang wrote:
>> The Milkv Mars is a development board based on the Starfive JH7110 SoC.
>> The board features:
>>
>> - JH7110 SoC
>> - 1/2/4/8 GiB LPDDR4 DRAM
>> - AXP15060 PMIC
>> - 40 pin GPIO header
>> - 3x USB 3.0 host port
>> - 1x USB 2.0 host port
>> - 1x M.2 E-Key
>> - 1x eMMC slot
>> - 1x MicroSD slot
>> - 1x QSPI Flash
>> - 1x 1Gbps Ethernet port
>> - 1x HDMI port
>> - 1x 2-lane DSI and 1x 4-lane DSI
>> - 1x 2-lane CSI
>>
>> Add the devicetree file describing the currently supported features,
>> namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.
>>
>> Signed-off-by: Jisheng Zhang <jszhang@...nel.org>
> 
> Got a dtbs_check issue in the patchwork CI:
> 
>    +arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dtb: gmac1-rgmii-rxin-clock: 'clock-frequency' is a required property
>    +	from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
>    +arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dtb: gmac1-rmii-refin-clock: 'clock-frequency' is a required property
>    +	from schema $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
> 
> Can you fix that please? Also, I applied some patches the other day that
> seem to conflict quite a bit with the common board dts patch. Would you
> please do a rebase on top of that please?
> 
> Cheers,
> Conor.
> 
>> ---
>>   arch/riscv/boot/dts/starfive/Makefile         |  1 +
>>   .../boot/dts/starfive/jh7110-milkv-mars.dts   | 35 +++++++++++++++++++
>>   2 files changed, 36 insertions(+)
>>   create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
>>
>> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
>> index 0141504c0f5c..2fa0cd7f31c3 100644
>> --- a/arch/riscv/boot/dts/starfive/Makefile
>> +++ b/arch/riscv/boot/dts/starfive/Makefile
>> @@ -8,5 +8,6 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@
>>   dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb
>>   dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
>>   
>> +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
>>   dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
>>   dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
>> new file mode 100644
>> index 000000000000..de600e799e7d
>> --- /dev/null
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
>> @@ -0,0 +1,35 @@
>> +// SPDX-License-Identifier: GPL-2.0 OR MIT
>> +/*
>> + * Copyright (C) 2023 Jisheng Zhang <jszhang@...nel.org>
>> + */
>> +
>> +/dts-v1/;
>> +#include "jh7110-visionfive2-mars-common.dtsi"
>> +
>> +/ {
>> +	model = "Milk-V Mars";
>> +	compatible = "milkv,mars", "starfive,jh7110";
>> +};
>> +
>> +&gmac0 {
>> +	starfive,tx-use-rgmii-clk;
>> +	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
>> +	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
>> +};
>> +
>> +
>> +&phy0 {
>> +	motorcomm,tx-clk-adj-enabled;
>> +	motorcomm,tx-clk-10-inverted;
>> +	motorcomm,tx-clk-100-inverted;
>> +	motorcomm,tx-clk-1000-inverted;
>> +	motorcomm,rx-clk-drv-microamp = <3970>;
>> +	motorcomm,rx-data-drv-microamp = <2910>;
>> +	rx-internal-delay-ps = <1500>;
>> +	tx-internal-delay-ps = <1500>;
>> +};
>> +
>> +&mmc1 {
>> +	disable-wp;

Due to which difference is 'disable-wp' necessary for the Mars board and 
not necessary for the VisionFive 2 board?

>> +	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;

On my VisionFive 2 1.2B, and 1.3A boards GPIO 41 reflects if an SD-card 
is inserted (as shown in U-Boot by gpio status -a). So shouldn't this 
value be moved to the common include 
"jh7110-visionfive2-mars-common.dtsi" and broken-cd removed from the 
VisionFive2 board?

https://doc-en.rvspace.org/VisionFive2/PDF/SCH_RV002_V1.2A_20221216.pdf
has a line

     GPIO41 | SD_SDIO0_CD_GPIO41 | Micro SD：J10

Best regards

Heinrich

>> +};
>> -- 
>> 2.43.0