linux-kernel - Re: [PATCH 1/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4

Open Source and information security mailing list archives

Message-ID: <CAGb2v64cF2fuW7vKq_=AhY+ciAp8t=fxT23AFJWB1qOv1xWuNw@mail.gmail.com>
Date: Thu, 28 Mar 2024 13:39:02 +0800
From: Chen-Yu Tsai <wens@...nel.org>
To: Folker Schwesinger <dev@...ker-schwesinger.de>
Cc: Vinod Koul <vkoul@...nel.org>, Yogesh Hegde <yogi.kernel@...il.com>, 
	Heiko Stuebner <heiko@...ech.de>, Chris Ruehl <chris.ruehl@...ys.com.hk>, 
	Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
	Conor Dooley <conor+dt@...nel.org>, Dragan Simic <dsimic@...jaro.org>, 
	Christopher Obbard <chris.obbard@...labora.com>, linux-arm-kernel@...ts.infradead.org, 
	linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org, 
	devicetree@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: rockchip: Add enable-strobe-pulldown to
 emmc phy on ROCK Pi 4

On Thu, Mar 28, 2024 at 4:33 AM Folker Schwesinger
<dev@...ker-schwesinger.de> wrote:
>
> Commit 8b5c2b45b8f0 disabled the internal pull-down for the strobe line
> causing I/O errors in HS400 mode for various eMMC modules.
>
> Enable the internal strobe pull-down for ROCK Pi 4 boards. Also re-enable
> HS400 mode, that was replaced with HS200 mode as a workaround for the
> stability issues in:
> cee572756aa2 ("arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4").
>
> This was tested on ROCK 4SE and ROCK Pi 4B+.
>
> Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in dts")
> Signed-off-by: Folker Schwesinger <dev@...ker-schwesinger.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> index 281a12180703..b9d6284bb804 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> @@ -194,6 +194,7 @@ &cpu_b1 {
>  };
>
>  &emmc_phy {
> +       rockchip,enable-strobe-pulldown;
>         status = "okay";
>  };
>
> @@ -648,7 +649,8 @@ &saradc {
>  &sdhci {
>         max-frequency = <150000000>;
>         bus-width = <8>;
> -       mmc-hs200-1_8v;

Shouldn't this be kept around? The node should list all supported modes,
not just the highest one. Same for the other patch.

ChenYu

> +       mmc-hs400-1_8v;
> +       mmc-hs400-enhanced-strobe;
>         non-removable;
>         status = "okay";
>  };
> --
> 2.44.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives