linux-kernel - [PATCH v7 2/2] PCI: keystone: Fix pci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240328085041.2916899-3-s-vadapalli@ti.com>
Date: Thu, 28 Mar 2024 14:20:41 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <lpieralisi@...nel.org>, <kw@...ux.com>, <robh@...nel.org>,
        <bhelgaas@...gle.com>, <manivannan.sadhasivam@...aro.org>,
        <fancer.lancer@...il.com>, <u.kleine-koenig@...gutronix.de>,
        <cassel@...nel.org>, <dlemoal@...nel.org>,
        <yoshihiro.shimoda.uh@...esas.com>
CC: <linux-pci@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
        <s-vadapalli@...com>
Subject: [PATCH v7 2/2] PCI: keystone: Fix pci_ops for AM654x SoC

In the process of converting .scan_bus() callbacks to .add_bus(), the
ks_pcie_v3_65_scan_bus() function was changed to ks_pcie_v3_65_add_bus().
The .scan_bus() method belonged to ks_pcie_host_ops which was specific
to controller version 3.65a, while the .add_bus() method had been added
to ks_pcie_ops which is shared between the controller versions 3.65a and
4.90a. Neither the older ks_pcie_v3_65_scan_bus() method, nor the newer
ks_pcie_v3_65_add_bus() method is applicable to the controller version
4.90a which is present in AM654x SoCs.

Thus, as a fix, remove "ks_pcie_v3_65_add_bus()" and move its contents
to the .msi_init callback "ks_pcie_msi_host_init()" which is specific to
the 3.65a controller.

Fixes: 6ab15b5e7057 ("PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus")
Suggested-by: Serge Semin <fancer.lancer@...il.com>
Suggested-by: Bjorn Helgaas <helgaas@...nel.org>
Suggested-by: Niklas Cassel <cassel@...nel.org>
Reviewed-by: Niklas Cassel <cassel@...nel.org>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 52 ++++++++---------------
 1 file changed, 18 insertions(+), 34 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 5c073e520628..6cb3a4713009 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -289,6 +289,24 @@ static void ks_pcie_clear_dbi_mode(struct keystone_pcie *ks_pcie)
 
 static int ks_pcie_msi_host_init(struct dw_pcie_rp *pp)
 {
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
+
+	/* Configure and set up BAR0 */
+	ks_pcie_set_dbi_mode(ks_pcie);
+
+	/* Enable BAR0 */
+	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
+	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
+
+	ks_pcie_clear_dbi_mode(ks_pcie);
+
+	/*
+	 * For BAR0, just setting bus address for inbound writes (MSI) should
+	 * be sufficient.  Use physical address to avoid any conflicts.
+	 */
+	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
+
 	pp->msi_irq_chip = &ks_pcie_msi_irq_chip;
 	return dw_pcie_allocate_domains(pp);
 }
@@ -445,44 +463,10 @@ static struct pci_ops ks_child_pcie_ops = {
 	.write = pci_generic_config_write,
 };
 
-/**
- * ks_pcie_v3_65_add_bus() - keystone add_bus post initialization
- * @bus: A pointer to the PCI bus structure.
- *
- * This sets BAR0 to enable inbound access for MSI_IRQ register
- */
-static int ks_pcie_v3_65_add_bus(struct pci_bus *bus)
-{
-	struct dw_pcie_rp *pp = bus->sysdata;
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
-
-	if (!pci_is_root_bus(bus))
-		return 0;
-
-	/* Configure and set up BAR0 */
-	ks_pcie_set_dbi_mode(ks_pcie);
-
-	/* Enable BAR0 */
-	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 1);
-	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, SZ_4K - 1);
-
-	ks_pcie_clear_dbi_mode(ks_pcie);
-
-	 /*
-	  * For BAR0, just setting bus address for inbound writes (MSI) should
-	  * be sufficient.  Use physical address to avoid any conflicts.
-	  */
-	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
-
-	return 0;
-}
-
 static struct pci_ops ks_pcie_ops = {
 	.map_bus = dw_pcie_own_conf_map_bus,
 	.read = pci_generic_config_read,
 	.write = pci_generic_config_write,
-	.add_bus = ks_pcie_v3_65_add_bus,
 };
 
 /**
-- 
2.40.1