lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240328123743.1713696-1-quic_msavaliy@quicinc.com>
Date: Thu, 28 Mar 2024 18:07:43 +0530
From: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
To: konrad.dybcio@...aro.org, andersson@...nel.org, andi.shyti@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-i2c@...r.kernel.org
Cc: quic_vdadhani@...cinc.com, Vinod Koul <vkoul@...nel.org>,
        Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Subject: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage

pm_runtime_get_sync() function fails during PM early resume and returning
-EACCES because runtime PM for the device is disabled at the early stage
causing i2c transfer to fail. Make changes to serve transfer with force
resume.

1. Register interrupt with IRQF_EARLY_RESUME and IRQF_NO_SUSPEND flags
   to avoid timeout of transfer when IRQ is not enabled during early stage.
2. Do force resume if pm_runtime_get_sync() is failing after system
   suspend when runtime PM is not enabled.
3. Increment power usage count after forced resume to balance
   it against regular runtime suspend.

Co-developed-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 55 ++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index da94df466e83..ed8201983a03 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -134,6 +134,8 @@ struct geni_i2c_clk_fld {
 	u8	t_cycle_cnt;
 };
 
+static int geni_i2c_runtime_resume(struct device *dev);
+
 /*
  * Hardware uses the underlying formula to calculate time periods of
  * SCL clock cycle. Firmware uses some additional cycles excluded from the
@@ -677,22 +679,48 @@ static int geni_i2c_fifo_xfer(struct geni_i2c_dev *gi2c,
 	return num;
 }
 
+static int geni_i2c_force_resume(struct geni_i2c_dev *gi2c)
+{
+	struct device *dev = gi2c->se.dev;
+	int ret;
+
+	ret = geni_i2c_runtime_resume(dev);
+	if (ret) {
+		dev_err(gi2c->se.dev, "Error turning SE resources:%d\n", ret);
+		pm_runtime_put_noidle(dev);
+		pm_runtime_set_suspended(dev);
+		return ret;
+	}
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	return ret;
+}
+
 static int geni_i2c_xfer(struct i2c_adapter *adap,
 			 struct i2c_msg msgs[],
 			 int num)
 {
 	struct geni_i2c_dev *gi2c = i2c_get_adapdata(adap);
+	struct device *dev = gi2c->se.dev;
 	int ret;
 
 	gi2c->err = 0;
 	reinit_completion(&gi2c->done);
-	ret = pm_runtime_get_sync(gi2c->se.dev);
-	if (ret < 0) {
-		dev_err(gi2c->se.dev, "error turning SE resources:%d\n", ret);
-		pm_runtime_put_noidle(gi2c->se.dev);
-		/* Set device in suspended since resume failed */
-		pm_runtime_set_suspended(gi2c->se.dev);
-		return ret;
+
+	if (!pm_runtime_enabled(dev) && gi2c->suspended) {
+		dev_dbg(gi2c->se.dev, "RT_PM disabled, Do force resume, usage_count:%d\n",
+			atomic_read(&dev->power.usage_count));
+		ret = geni_i2c_force_resume(gi2c);
+		if (ret)
+			return ret;
+	} else {
+		ret = pm_runtime_get_sync(dev);
+		if (ret == -EACCES && gi2c->suspended) {
+			dev_dbg(gi2c->se.dev, "PM get_sync() failed-%d, force resume\n", ret);
+			ret = geni_i2c_force_resume(gi2c);
+			if (ret)
+				return ret;
+		}
 	}
 
 	qcom_geni_i2c_conf(gi2c);
@@ -702,8 +730,15 @@ static int geni_i2c_xfer(struct i2c_adapter *adap,
 	else
 		ret = geni_i2c_fifo_xfer(gi2c, msgs, num);
 
-	pm_runtime_mark_last_busy(gi2c->se.dev);
-	pm_runtime_put_autosuspend(gi2c->se.dev);
+	if (!pm_runtime_enabled(dev) && !gi2c->suspended) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_set_suspended(dev);
+		gi2c->suspended = 0;
+	} else {
+		pm_runtime_mark_last_busy(gi2c->se.dev);
+		pm_runtime_put_autosuspend(gi2c->se.dev);
+	}
+
 	gi2c->cur = NULL;
 	gi2c->err = 0;
 	return ret;
@@ -820,7 +855,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	init_completion(&gi2c->done);
 	spin_lock_init(&gi2c->lock);
 	platform_set_drvdata(pdev, gi2c);
-	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
+	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, IRQF_EARLY_RESUME | IRQF_NO_SUSPEND,
 			       dev_name(dev), gi2c);
 	if (ret) {
 		dev_err(dev, "Request_irq failed:%d: err:%d\n",
-- 
2.25.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ