[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240328125056.1054878-1-alexey.klimov@linaro.org>
Date: Thu, 28 Mar 2024 12:50:56 +0000
From: Alexey Klimov <alexey.klimov@...aro.org>
To: olivia@...enic.com,
herbert@...dor.apana.org.au,
sehi.kim@...sung.com,
linux-samsung-soc@...r.kernel.org,
peter.griffin@...aro.org
Cc: krzysztof.kozlowski@...aro.org,
alim.akhtar@...sung.com,
alexey.klimov@...aro.org,
linux-crypto@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
kernel-team@...roid.com,
andre.draszik@...aro.org,
willmcvicker@...gle.com,
saravanak@...gle.com,
elder@...aro.org,
tudor.ambarus@...aro.org,
klimov.linux@...il.com
Subject: [PATCH REVIEW] hwrng: add exynos Secure World RNG device driver
The Exynos TRNG device is controlled by firmware and shared between
non-secure world and secure world. Access to it is exposed via SMC
interface which is implemented here. The firmware code does
additional security checks, start-up test and some checks on resume.
This device is found, for instance, in Google Tensor GS101-family
of devices.
Signed-off-by: Alexey Klimov <alexey.klimov@...aro.org>
---
drivers/char/hw_random/Kconfig | 12 +
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/exynos-swd-trng.c | 423 +++++++++++++++++++++++
3 files changed, 436 insertions(+)
create mode 100644 drivers/char/hw_random/exynos-swd-trng.c
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 442c40efb200..bff7c3ec129a 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -479,6 +479,18 @@ config HW_RANDOM_EXYNOS
If unsure, say Y.
+config HW_RANDOM_EXYNOS_SWD
+ tristate "Exynos SWD HW random number generator support"
+ default n
+ help
+ This driver provides kernel-side support for accessing Samsung
+ TRNG hardware located in secure world using smc calls.
+
+ To compile this driver as a module, choose M here: the
+ module will be called exynos-swd-trng.
+
+ If unsure, say N.
+
config HW_RANDOM_OPTEE
tristate "OP-TEE based Random Number Generator support"
depends on OPTEE
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index 32549a1186dc..ce64929d461a 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
n2-rng-y := n2-drv.o n2-asm.o
obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o
obj-$(CONFIG_HW_RANDOM_EXYNOS) += exynos-trng.o
+obj-$(CONFIG_HW_RANDOM_EXYNOS_SWD) += exynos-swd-trng.o
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP3_ROM) += omap3-rom-rng.o
diff --git a/drivers/char/hw_random/exynos-swd-trng.c b/drivers/char/hw_random/exynos-swd-trng.c
new file mode 100644
index 000000000000..29def8e6d0b7
--- /dev/null
+++ b/drivers/char/hw_random/exynos-swd-trng.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * exynos-swd-trng.c - Random Number Generator driver for the exynos TRNG
+ * located in secure world
+ * Copyright (C) Linaro Ltd 2024 Alexey Klimov <alexey.klimov@...aro.org>
+ *
+ * Based on downstream driver:
+ * Copyright (C) 2018 Samsung Electronics
+ * Sehee Kim <sehi.kim@...sung.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/delay.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* DTRNG smc */
+#define SMC_CMD_RANDOM (0x82001012)
+
+/* DTRNG smc commands */
+#define HWRNG_INIT (0x0)
+#define HWRNG_EXIT (0x1)
+#define HWRNG_GET_DATA (0x2)
+#define HWRNG_RESUME (0x3)
+
+#define HWRNG_RET_OK 0
+#define HWRNG_RET_INVALID_ERROR 1
+#define HWRNG_RET_RETRY_ERROR 2
+#define HWRNG_RET_INVALID_FLAG_ERROR 3
+#define HWRNG_RET_TEST_ERROR 4
+#define HWRNG_RET_START_UP_TEST_DONE 5
+#define HWRNG_RET_TEST_KAT_ERROR 0xC
+
+#define EXYRNG_START_UP_SIZE (4096 + 1)
+#define EXYRNG_RETRY_MAX_COUNT 1000000
+#define EXYRNG_START_UP_TEST_MAX_RETRY 2
+
+#define DRVNAME "exynos_swd_trng"
+
+enum state {
+ INACTIVE = 0,
+ ACTIVE,
+};
+
+struct exyswd_rng {
+ struct hwrng rng;
+ enum state state;
+ struct device *dev;
+ /* to track and protect state of the device */
+ struct mutex lock;
+};
+
+static int __exynos_cm_smc(u64 *arg0, u64 *arg1,
+ u64 *arg2, u64 *arg3)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(*arg0, *arg1, *arg2, *arg3, 0, 0, 0, 0, &res);
+
+ *arg0 = res.a0;
+ *arg1 = res.a1;
+ *arg2 = res.a2;
+ *arg3 = res.a3;
+
+ return *arg0;
+}
+
+static int exynos_cm_cmd(int cmd)
+{
+ u64 reg0, reg1, reg2, reg3;
+
+ reg0 = SMC_CMD_RANDOM;
+ reg1 = cmd;
+ reg3 = reg2 = 0;
+
+ return __exynos_cm_smc(®0, ®1, ®2, ®3);
+}
+
+static int exynos_cm_get_data(u64 *arg0, u64 *arg1,
+ u64 *arg2, u64 *arg3)
+{
+ *arg0 = SMC_CMD_RANDOM;
+ *arg1 = HWRNG_GET_DATA;
+ *arg3 = 0;
+
+ return __exynos_cm_smc(arg0, arg1, arg2, arg3);
+}
+
+static int exynos_swd_get_data(u64 *arg0, u64 *arg1, u64 *arg2, u64 *arg3,
+ struct exyswd_rng *exyswd_rng)
+{
+ u32 retry_cnt = 0;
+ int ret;
+
+ while (retry_cnt++ < EXYRNG_RETRY_MAX_COUNT) {
+ ret = exynos_cm_get_data(arg0, arg1, arg2, arg3);
+
+ if (ret == HWRNG_RET_OK)
+ return 0;
+
+ if (ret == HWRNG_RET_RETRY_ERROR) {
+ usleep_range(50, 100);
+ continue;
+ }
+
+ if (ret == HWRNG_RET_TEST_ERROR) {
+ dev_dbg(exyswd_rng->dev, "error while testing\n");
+ return -EAGAIN;
+ }
+
+ return -EFAULT;
+ }
+
+ ret = -EFAULT;
+ dev_warn(exyswd_rng->dev, "retry counter is reached\n");
+ return ret;
+}
+
+static int exynos_swd_init(void)
+{
+ u32 retry_cnt = 0;
+ int ret;
+
+ do {
+ ret = exynos_cm_cmd(HWRNG_INIT);
+ if (ret == HWRNG_RET_RETRY_ERROR) {
+ if (retry_cnt++ > EXYRNG_RETRY_MAX_COUNT)
+ break;
+
+ usleep_range(50, 100);
+ }
+ } while (ret == HWRNG_RET_RETRY_ERROR);
+
+ return ret;
+}
+
+static void exynos_swd_exit(void)
+{
+ u32 retry_cnt = 0;
+
+ while (retry_cnt++ < EXYRNG_RETRY_MAX_COUNT) {
+ if (!exynos_cm_cmd(HWRNG_EXIT))
+ break;
+ usleep_range(50, 100);
+ }
+}
+
+static int exynos_swd_startup_test(struct exyswd_rng *exyswd_rng)
+{
+ u64 reg0, reg1, reg2, reg3;
+ int start_up_size = EXYRNG_START_UP_SIZE;
+ u32 retry_cnt = 0;
+ int ret;
+
+ ret = exynos_swd_init();
+ if (ret != HWRNG_RET_OK) {
+ if (ret == HWRNG_RET_TEST_ERROR) {
+ ret = -EAGAIN;
+ goto out;
+ } else
+ return -EFAULT;
+ }
+
+ while (start_up_size > 0) {
+ /* For start-up test the 3-rd argument has to be set to 1 */
+ reg2 = 1;
+ ret = exynos_cm_get_data(®0, ®1, ®2, ®3);
+ if (ret == HWRNG_RET_RETRY_ERROR) {
+ if (retry_cnt++ > EXYRNG_RETRY_MAX_COUNT) {
+ dev_warn(exyswd_rng->dev,
+ "exceeded retry in start-up test\n");
+ break;
+ }
+ usleep_range(50, 100);
+ continue;
+ }
+
+ if (ret == HWRNG_RET_TEST_ERROR ||
+ ret == HWRNG_RET_TEST_KAT_ERROR) {
+ dev_err(exyswd_rng->dev,
+ "malfunction of TRNG(HW) is detected\n");
+ return -EFAULT;
+ }
+
+ if (ret == HWRNG_RET_START_UP_TEST_DONE) {
+ dev_dbg(exyswd_rng->dev,
+ "start-up test is already done\n");
+ ret = 0;
+ break;
+ }
+
+ if (ret != HWRNG_RET_OK) {
+ dev_dbg(exyswd_rng->dev, "failed to get random data\n");
+ return -EFAULT;
+ }
+
+ start_up_size -= 32;
+ retry_cnt = 0;
+ }
+
+out:
+ exynos_swd_exit();
+ return ret;
+}
+
+static int exynos_swd_read(struct hwrng *rng, void *data, size_t max, bool wait)
+{
+ struct exyswd_rng *exyswd_rng =
+ container_of(rng, struct exyswd_rng, rng);
+ u64 reg0, reg1, reg2, reg3;
+ u32 *read_buf = data;
+ u32 read_size = max;
+ u32 retry_cnt;
+ int ret = HWRNG_RET_OK;
+
+ mutex_lock(&exyswd_rng->lock);
+ ret = exynos_swd_init();
+ if (ret != HWRNG_RET_OK) {
+ if (ret == HWRNG_RET_TEST_ERROR) {
+ ret = -EAGAIN;
+ goto out_locked;
+ } else {
+ mutex_unlock(&exyswd_rng->lock);
+ return -EFAULT;
+ }
+ }
+
+ exyswd_rng->state = ACTIVE;
+ mutex_unlock(&exyswd_rng->lock);
+
+ retry_cnt = 0;
+ while (read_size >= 8) {
+ reg2 = 0;
+ ret = exynos_swd_get_data(®0, ®1, ®2, ®3, exyswd_rng);
+ if (ret)
+ goto out;
+
+ *(u32 *)(read_buf++) = (u32)reg2;
+ *(u32 *)(read_buf++) = (u32)reg3;
+
+ read_size -= 8;
+ retry_cnt = 0;
+ }
+
+ /*
+ * rng_buf_size is 32 bytes or cache line usually, it is unlikely
+ * we will have remaining bytes to read here.
+ */
+ if (unlikely(read_size > 0)) {
+ reg2 = 0;
+ ret = exynos_swd_get_data(®0, ®1, ®2, ®3, exyswd_rng);
+ if (ret)
+ goto out;
+ if (read_size >= 4) {
+ *(u32 *)(read_buf++) = (u32)reg2;
+ read_size -= 4;
+ }
+
+ if (read_size) {
+ memcpy(read_buf, ®3, read_size);
+ read_size = 0;
+ }
+ }
+
+ ret = max;
+out:
+ mutex_lock(&exyswd_rng->lock);
+out_locked:
+ exynos_swd_exit();
+ exyswd_rng->state = INACTIVE;
+ mutex_unlock(&exyswd_rng->lock);
+
+ return ret;
+}
+
+static int exyswd_rng_probe(struct platform_device *pdev)
+{
+ struct exyswd_rng *exyswd_rng;
+ int ret;
+
+ exyswd_rng = devm_kzalloc(&pdev->dev, sizeof(*exyswd_rng), GFP_KERNEL);
+ if (!exyswd_rng)
+ return -ENOMEM;
+
+ exyswd_rng->rng.name = DRVNAME;
+ exyswd_rng->rng.read = exynos_swd_read;
+ exyswd_rng->rng.quality = 500;
+ exyswd_rng->dev = &pdev->dev;
+ exyswd_rng->state = INACTIVE;
+ mutex_init(&exyswd_rng->lock);
+
+ /*
+ * Do the startup test first. If it works we've got the device
+ * and can finish probe().
+ */
+ ret = exynos_swd_startup_test(exyswd_rng);
+ if (ret) {
+ dev_dbg(&pdev->dev, "start-up test failed\n");
+ return -ENODEV;
+ }
+
+ ret = devm_hwrng_register(&pdev->dev, &exyswd_rng->rng);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "failed to register hwrng\n");
+
+ platform_set_drvdata(pdev, exyswd_rng);
+ dev_set_drvdata(&pdev->dev, exyswd_rng);
+
+ dev_info(&pdev->dev, "hwrng registered\n");
+
+ return 0;
+}
+
+static int exyswd_rng_remove(struct platform_device *pdev)
+{
+ struct exyswd_rng *exyswd_rng = platform_get_drvdata(pdev);
+
+ devm_hwrng_unregister(&pdev->dev, &exyswd_rng->rng);
+
+ mutex_lock(&exyswd_rng->lock);
+ if (exyswd_rng->state == ACTIVE) {
+ exynos_swd_exit();
+ exyswd_rng->state = INACTIVE;
+ }
+ mutex_unlock(&exyswd_rng->lock);
+
+ return 0;
+}
+
+#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
+static int exyswd_rng_suspend(struct device *dev)
+{
+ struct exyswd_rng *exyswd_rng = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&exyswd_rng->lock);
+ if (exyswd_rng->state) {
+ ret = exynos_cm_cmd(HWRNG_EXIT);
+ if (ret != HWRNG_RET_OK)
+ dev_warn(dev,
+ "failed to enter suspend, error %d\n", ret);
+ }
+ mutex_unlock(&exyswd_rng->lock);
+
+ return ret;
+}
+
+static int exyswd_rng_resume(struct device *dev)
+{
+ struct exyswd_rng *exyswd_rng = dev_get_drvdata(dev);
+ int ret;
+
+ mutex_lock(&exyswd_rng->lock);
+ ret = exynos_cm_cmd(HWRNG_RESUME);
+ if (ret != HWRNG_RET_OK)
+ dev_warn(dev, "failed to resume, error %d\n", ret);
+ if (exyswd_rng->state) {
+ ret = exynos_cm_cmd(HWRNG_INIT);
+ if (ret != HWRNG_RET_OK)
+ dev_warn(dev,
+ "failed to init hwrng on resume, error %d\n",
+ ret);
+ }
+ mutex_unlock(&exyswd_rng->lock);
+
+ return ret;
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(exyswd_rng_pm_ops, exyswd_rng_suspend,
+ exyswd_rng_resume, NULL);
+
+static struct platform_driver exyswd_rng_driver = {
+ .probe = exyswd_rng_probe,
+ .remove = exyswd_rng_remove,
+ .driver = {
+ .name = DRVNAME,
+ .owner = THIS_MODULE,
+ .pm = &exyswd_rng_pm_ops,
+ },
+};
+
+static struct platform_device *exyswd_rng_pdev;
+
+static int __init exyswd_rng_init(void)
+{
+ int ret;
+
+ exyswd_rng_pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+ if (IS_ERR(exyswd_rng_pdev))
+ pr_err(DRVNAME ": could not register device: %ld\n",
+ PTR_ERR(exyswd_rng_pdev));
+
+ ret = platform_driver_register(&exyswd_rng_driver);
+ if (ret) {
+ platform_device_unregister(exyswd_rng_pdev);
+ return ret;
+ }
+
+ pr_info("ExyRNG driver, (c) 2014 Samsung Electronics\n");
+
+ return 0;
+}
+
+static void __exit exyswd_rng_exit(void)
+{
+ platform_driver_unregister(&exyswd_rng_driver);
+ platform_device_unregister(exyswd_rng_pdev);
+}
+
+module_init(exyswd_rng_init);
+module_exit(exyswd_rng_exit);
+
+MODULE_DESCRIPTION("Exynos SWD H/W Random Number Generator driver");
+MODULE_AUTHOR("Alexey Klimov <alexey.klimov@...aro.org>");
+MODULE_AUTHOR("Sehee Kim <sehi.kim@...sung.com>");
+MODULE_LICENSE("GPL");
--
2.43.0
Powered by blists - more mailing lists