[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZgbypXhhTGep1r8-@matsya>
Date: Fri, 29 Mar 2024 22:26:05 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFT 3/7] phy: qcom: qmp-combo: introduce QPHY_MODE
On 29-02-24, 14:07, Neil Armstrong wrote:
> Introduce an enum for the QMP Combo PHY modes, use it in the
> QMP commmon phy init function and default to COMBO mode.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 41 +++++++++++++++++++++++++++----
> 1 file changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> index 3721bbea9eae..ac5d528fd7a1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> @@ -61,6 +61,12 @@
>
> #define PHY_INIT_COMPLETE_TIMEOUT 10000
>
> +enum qphy_mode {
> + QPHY_MODE_COMBO = 0,
> + QPHY_MODE_DP_ONLY,
> + QPHY_MODE_USB_ONLY,
> +};
> +
> /* set of registers with offsets different per-PHY */
> enum qphy_reg_layout {
> /* PCS registers */
> @@ -1491,6 +1497,7 @@ struct qmp_combo {
>
> struct mutex phy_mutex;
> int init_count;
> + enum qphy_mode init_mode;
>
> struct phy *usb_phy;
> enum phy_mode mode;
> @@ -2531,12 +2538,33 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
> if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
> val |= SW_PORTSELECT_VAL;
> writel(val, com + QPHY_V3_DP_COM_TYPEC_CTRL);
> - writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
>
> - /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> - qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> - SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> - SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> + switch (qmp->init_mode) {
> + case QPHY_MODE_COMBO:
Case should be at same indent as switch :-) coding style 101
> + writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> +
> + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> + qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> + break;
> +
> + case QPHY_MODE_DP_ONLY:
> + writel(DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> +
> + /* bring QMP DP PHY PCS block out of reset */
> + qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET);
> + break;
> +
> + case QPHY_MODE_USB_ONLY:
> + writel(USB3_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> +
> + /* bring QMP USB PHY PCS block out of reset */
> + qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> + break;
> + }
>
> qphy_clrbits(com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> qphy_clrbits(com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> @@ -3545,6 +3573,9 @@ static int qmp_combo_probe(struct platform_device *pdev)
> if (ret)
> goto err_node_put;
>
> + /* Set PHY_MODE as combo by default */
> + qmp->init_mode = QPHY_MODE_COMBO;
> +
> qmp->usb_phy = devm_phy_create(dev, usb_np, &qmp_combo_usb_phy_ops);
> if (IS_ERR(qmp->usb_phy)) {
> ret = PTR_ERR(qmp->usb_phy);
>
> --
> 2.34.1
--
~Vinod
Powered by blists - more mailing lists