linux-kernel - [PATCH AUTOSEL 6.6 07/75] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Fri, 29 Mar 2024 08:41:48 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
	stable@...r.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
	Bjorn Andersson <andersson@...nel.org>,
	Sasha Levin <sashal@...nel.org>,
	konrad.dybcio@...aro.org,
	robh@...nel.org,
	krzysztof.kozlowski+dt@...aro.org,
	conor+dt@...nel.org,
	linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org
Subject: [PATCH AUTOSEL 6.6 07/75] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY

From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>

[ Upstream commit 319a12e7c399df4316f54f6cc83cd6cdffb4ec4a ]

The Inforce IFC6560 board actually has USB SS lines routed to the USB-C
connector. Enable USB 3.0 PHY and SS mode for the USB3 host.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-4-2fbd683aea77@linaro.org
Signed-off-by: Bjorn Andersson <andersson@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
index 21fae799c816a..702ab49bbc594 100644
--- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -454,16 +454,15 @@ &usb2_dwc3 {
 };
 
 &usb3 {
-	qcom,select-utmi-as-pipe-clk;
-
 	status = "okay";
 };
 
 &usb3_dwc3 {
-	maximum-speed = "high-speed";
-	phys = <&qusb2phy0>;
-	phy-names = "usb2-phy";
-
 	dr_mode = "peripheral";
 	extcon = <&extcon_usb>;
 };
+
+&usb3_qmpphy {
+	vdda-phy-supply = <&vreg_l1b_0p925>;
+	status = "okay";
+};
-- 
2.43.0