| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240331-typec-fix-sm8250-v2-6-857acb6bd88e@linaro.org>
Date: Sun, 31 Mar 2024 06:48:56 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH v2 6/7] arm64: dts: qcom: x1e80100: describe USB signals
properly
Follow example of other platforms. Rename HS graph nodes to contain
'dwc3_hs' and link SS lanes from DWC3 controllers to QMP PHYs.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100.dtsi | 149 +++++++++++++++++++++++++++++++--
1 file changed, 141 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index f5a3b39ae70e..3213eccc3a3a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -2543,6 +2543,33 @@ usb_1_ss0_qmpphy: phy@...000 {
#phy-cells = <1>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss0_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss0_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_ss0_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
usb_1_ss1_hsphy: phy@...000 {
@@ -2583,6 +2610,33 @@ usb_1_ss1_qmpphy: phy@...000 {
#phy-cells = <1>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss1_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss1_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_ss1_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
usb_1_ss2_hsphy: phy@...000 {
@@ -2623,6 +2677,33 @@ usb_1_ss2_qmpphy: phy@...000 {
#phy-cells = <1>;
status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss2_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss2_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_ss2_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
};
cnoc_main: interconnect@...0000 {
@@ -3445,8 +3526,23 @@ usb_1_ss2_dwc3: usb@...0000 {
dma-coherent;
- port {
- usb_1_ss2_role_switch: endpoint {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss2_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss2_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>;
+ };
};
};
};
@@ -3514,8 +3610,15 @@ usb_2_dwc3: usb@...0000 {
phy-names = "usb2-phy";
maximum-speed = "high-speed";
- port {
- usb_2_role_switch: endpoint {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_2_dwc3_hs: endpoint {
+ };
};
};
};
@@ -3590,8 +3693,23 @@ usb_1_ss0_dwc3: usb@...0000 {
dma-coherent;
- port {
- usb_1_ss0_role_switch: endpoint {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss0_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss0_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>;
+ };
};
};
};
@@ -3673,8 +3791,23 @@ usb_1_ss1_dwc3: usb@...0000 {
dma-coherent;
- port {
- usb_1_ss1_role_switch: endpoint {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_ss1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_ss1_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>;
+ };
};
};
};
--
2.39.2
Powered by blists - more mailing lists