lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon,  1 Apr 2024 16:10:50 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Andrew Lunn <andrew@...n.ch>,
	Gregory Clement <gregory.clement@...tlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 5/6] arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses

Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses.  Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:

  cn9130-crb.dtsi:29.35-37.4: Warning (unit_address_vs_reg): /ap0_mmc_vccq@0: node has a unit name, but no reg or ranges property
  cn9130-crb.dtsi:39.38-46.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property
  cn9130-crb.dtsi:57.33-65.4: Warning (unit_address_vs_reg): /cp0_sd_vccq@0: node has a unit name, but no reg or ranges property
  cn9130-crb.dtsi:67.31-75.4: Warning (unit_address_vs_reg): /cp0_sd_vcc@0: node has a unit name, but no reg or ranges property

Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 6fcc34f7b464..d48dd6bca6e5 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -26,7 +26,7 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+	ap0_reg_mmc_vccq: regulator-1 {
 		compatible = "regulator-gpio";
 		regulator-name = "ap0_mmc_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -36,7 +36,7 @@ ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
 			  3300000 0x0>;
 	};
 
-	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+	cp0_reg_usb3_vbus1: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0-xhci1-vbus";
 		regulator-min-microvolt = <5000000>;
@@ -45,16 +45,16 @@ cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
 		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+	cp0_usb3_0_phy0: usb-phy-1 {
 		compatible = "usb-nop-xceiv";
 	};
 
-	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+	cp0_usb3_0_phy1: usb-phy-2 {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&cp0_reg_usb3_vbus1>;
 	};
 
-	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+	cp0_reg_sd_vccq: regulator-3 {
 		compatible = "regulator-gpio";
 		regulator-name = "cp0_sd_vccq";
 		regulator-min-microvolt = <1800000>;
@@ -64,7 +64,7 @@ cp0_reg_sd_vccq: cp0_sd_vccq@0 {
 			  3300000 0x0>;
 	};
 
-	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+	cp0_reg_sd_vcc: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "cp0_sd_vcc";
 		regulator-min-microvolt = <3300000>;
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ