| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240401153740.123978-7-krzk@kernel.org>
Date: Mon, 1 Apr 2024 17:37:37 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Conor Dooley <conor@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>,
UNGLinuxDriver@...rochip.com,
"David S. Miller" <davem@...emloft.net>,
Bjarni Jonasson <bjarni.jonasson@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 07/10] arm64: dts: microchip: sparx5_pcb134: drop LED unit addresses
GPIO leds should not have unit addresses (no "reg" property), as
reported by dtc W=1 warnings:
sparx5_pcb134_board.dtsi:18.9-21.5: Warning (unit_address_vs_reg): /leds/led@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
.../dts/microchip/sparx5_pcb134_board.dtsi | 96 +++++++++----------
1 file changed, 48 insertions(+), 48 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index cafec6ef0d0f..f165a409bc1d 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -15,234 +15,234 @@ gpio-restart {
leds {
compatible = "gpio-leds";
- led@0 {
+ led-0 {
label = "twr0:green";
gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
};
- led@1 {
+ led-1 {
label = "twr0:yellow";
gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
};
- led@2 {
+ led-2 {
label = "twr1:green";
gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
};
- led@3 {
+ led-3 {
label = "twr1:yellow";
gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
};
- led@4 {
+ led-4 {
label = "twr2:green";
gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
};
- led@5 {
+ led-5 {
label = "twr2:yellow";
gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
};
- led@6 {
+ led-6 {
label = "twr3:green";
gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
};
- led@7 {
+ led-7 {
label = "twr3:yellow";
gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
};
- led@8 {
+ led-8 {
label = "eth12:green";
gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@9 {
+ led-9 {
label = "eth12:yellow";
gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@10 {
+ led-10 {
label = "eth13:green";
gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@11 {
+ led-11 {
label = "eth13:yellow";
gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@12 {
+ led-12 {
label = "eth14:green";
gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@13 {
+ led-13 {
label = "eth14:yellow";
gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@14 {
+ led-14 {
label = "eth15:green";
gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@15 {
+ led-15 {
label = "eth15:yellow";
gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@16 {
+ led-16 {
label = "eth48:green";
gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@17 {
+ led-17 {
label = "eth48:yellow";
gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@18 {
+ led-18 {
label = "eth49:green";
gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@19 {
+ led-19 {
label = "eth49:yellow";
gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@20 {
+ led-20 {
label = "eth50:green";
gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@21 {
+ led-21 {
label = "eth50:yellow";
gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@22 {
+ led-22 {
label = "eth51:green";
gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@23 {
+ led-23 {
label = "eth51:yellow";
gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@24 {
+ led-24 {
label = "eth52:green";
gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@25 {
+ led-25 {
label = "eth52:yellow";
gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@26 {
+ led-26 {
label = "eth53:green";
gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@27 {
+ led-27 {
label = "eth53:yellow";
gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@28 {
+ led-28 {
label = "eth54:green";
gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@29 {
+ led-29 {
label = "eth54:yellow";
gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@30 {
+ led-30 {
label = "eth55:green";
gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@31 {
+ led-31 {
label = "eth55:yellow";
gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@32 {
+ led-32 {
label = "eth56:green";
gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@33 {
+ led-33 {
label = "eth56:yellow";
gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@34 {
+ led-34 {
label = "eth57:green";
gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@35 {
+ led-35 {
label = "eth57:yellow";
gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@36 {
+ led-36 {
label = "eth58:green";
gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@37 {
+ led-37 {
label = "eth58:yellow";
gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@38 {
+ led-38 {
label = "eth59:green";
gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@39 {
+ led-39 {
label = "eth59:yellow";
gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@40 {
+ led-40 {
label = "eth60:green";
gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@41 {
+ led-41 {
label = "eth60:yellow";
gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@42 {
+ led-42 {
label = "eth61:green";
gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@43 {
+ led-43 {
label = "eth61:yellow";
gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@44 {
+ led-44 {
label = "eth62:green";
gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@45 {
+ led-45 {
label = "eth62:yellow";
gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@46 {
+ led-46 {
label = "eth63:green";
gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led@47 {
+ led-47 {
label = "eth63:yellow";
gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
--
2.34.1
Powered by blists - more mailing lists