[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240401153740.123978-10-krzk@kernel.org>
Date: Mon, 1 Apr 2024 17:37:40 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Conor Dooley <conor@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Daniel Machon <daniel.machon@...rochip.com>,
UNGLinuxDriver@...rochip.com,
"David S. Miller" <davem@...emloft.net>,
Bjarni Jonasson <bjarni.jonasson@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH RFT 10/10] arm64: dts: microchip: sparx5_pcb135: drop duplicated NOR flash
Since beginning the DTS extended the SPI0 in two places adding two SPI
muxes, each with same SPI NOR flash. Both used exactly the same
chip-selects, so this was clearly buggy code. Without checking in
datasheet, assume device has only one SPI NOR flash, so code was
duplicated.
Fixes dtc W=1 warnings:
sparx5_pcb135_board.dtsi:92.10-96.4: Warning (unique_unit_address_if_enabled): /axi@...000000/spi@...104000/flash@0: duplicate unit-address (also used in node /axi@...000000/spi@...104000/spi@0)
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
Not tested on hardware
---
.../boot/dts/microchip/sparx5_pcb135_board.dtsi | 16 ----------------
1 file changed, 16 deletions(-)
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index 20016efb3656..d64e642e3873 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -96,22 +96,6 @@ flash@0 {
};
};
-&spi0 {
- status = "okay";
- spi@0 {
- compatible = "spi-mux";
- mux-controls = <&mux>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>; /* CS0 */
- flash@9 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <8000000>;
- reg = <0x9>; /* SPI */
- };
- };
-};
-
&sgpio1 {
status = "okay";
microchip,sgpio-port-ranges = <24 31>;
--
2.34.1
Powered by blists - more mailing lists