[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJprRHg2KH7H6SPF3yfg8HCT2Fe2Hg-LXU19ak78TkKWwjA@mail.gmail.com>
Date: Mon, 1 Apr 2024 22:11:48 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Marijn Suijten <marijn.suijten@...ainline.org>
Cc: Sumit Semwal <sumit.semwal@...aro.org>, Caleb Connolly <caleb.connolly@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>, Jessica Zhang <quic_jesszhan@...cinc.com>,
Sam Ravnborg <sam@...nborg.org>, David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Vinod Koul <vkoul@...nel.org>, Caleb Connolly <caleb@...nolly.tech>
Subject: Re: [PATCH 3/3] drm: panel: Add LG sw43408 panel driver
On Mon, 1 Apr 2024 at 13:29, Marijn Suijten
<marijn.suijten@...ainline.org> wrote:
>
> On 2024-03-30 16:37:08, Dmitry Baryshkov wrote:
> > On Sat, 30 Mar 2024 at 12:27, Marijn Suijten
> > <marijn.suijten@...ainline.org> wrote:
> > >
> > > On 2024-03-30 05:59:30, Dmitry Baryshkov wrote:
> > > > From: Sumit Semwal <sumit.semwal@...aro.org>
> > > >
> > > > LG SW43408 is 1080x2160, 4-lane MIPI-DSI panel, used in some Pixel3
> > > > phones.
> > > >
> > > > Whatever init sequence we have for this panel isn't capable of
> > > > initialising it completely, toggling the reset gpio ever causes the
> > > > panel to die. Until this is resolved we avoid resetting the panel. The
> > >
> > > Are you sure it is avoided? This patch seems to be toggling reset_gpio in
> > > sw43408_prepare()?
> > >
> > > > disable/unprepare functions only put the panel to sleep mode and
> > > > disable the backlight.
> > > >
> > > > Signed-off-by: Sumit Semwal <sumit.semwal@...aro.org>
> > > > [vinod: Add DSC support]
> > > > Signed-off-by: Vinod Koul <vkoul@...nel.org>
> > > > [caleb: cleanup and support turning off the panel]
> > > > Signed-off-by: Caleb Connolly <caleb@...nolly.tech>
> > > > [DB: partially rewrote the driver and fixed DSC programming]
> > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> > > > ---
> > > > MAINTAINERS | 8 +
> > > > drivers/gpu/drm/panel/Kconfig | 11 ++
> > > > drivers/gpu/drm/panel/Makefile | 1 +
> > > > drivers/gpu/drm/panel/panel-lg-sw43408.c | 322 +++++++++++++++++++++++++++++++
> > > > 4 files changed, 342 insertions(+)
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > > index 4b511a55101c..f4cf7ee97376 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -6755,6 +6755,14 @@ S: Maintained
> > > > F: Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
> > > > F: drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
> > > >
> > > > +DRM DRIVER FOR LG SW43408 PANELS
> > > > +M: Sumit Semwal <sumit.semwal@...aro.org>
> > > > +M: Caleb Connolly <caleb.connolly@...aro.org>
> > > > +S: Maintained
> > > > +T: git git://anongit.freedesktop.org/drm/drm-misc
> > > > +F: Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
> > > > +F: drivers/gpu/drm/panel/panel-lg-sw43408.c
> > > > +
> > > > DRM DRIVER FOR LOGICVC DISPLAY CONTROLLER
> > > > M: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
> > > > S: Supported
> > > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > > > index d037b3b8b999..f94c702735cb 100644
> > > > --- a/drivers/gpu/drm/panel/Kconfig
> > > > +++ b/drivers/gpu/drm/panel/Kconfig
> > > > @@ -335,6 +335,17 @@ config DRM_PANEL_LG_LG4573
> > > > Say Y here if you want to enable support for LG4573 RGB panel.
> > > > To compile this driver as a module, choose M here.
> > > >
> > > > +config DRM_PANEL_LG_SW43408
> > > > + tristate "LG SW43408 panel"
> > > > + depends on OF
> > > > + depends on DRM_MIPI_DSI
> > > > + depends on BACKLIGHT_CLASS_DEVICE
> > > > + help
> > > > + Say Y here if you want to enable support for LG sw43408 panel.
> > > > + The panel has a 1080x2160 resolution and uses
> > > > + 24 bit RGB per pixel. It provides a MIPI DSI interface to
> > > > + the host and has a built-in LED backlight.
> > > > +
> > > > config DRM_PANEL_MAGNACHIP_D53E6EA8966
> > > > tristate "Magnachip D53E6EA8966 DSI panel"
> > > > depends on OF && SPI
> > > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > > > index f156d7fa0bcc..a75687d13caf 100644
> > > > --- a/drivers/gpu/drm/panel/Makefile
> > > > +++ b/drivers/gpu/drm/panel/Makefile
> > > > @@ -34,6 +34,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> > > > obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> > > > obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> > > > obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> > > > +obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
> > > > obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
> > > > obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> > > > obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3051D) += panel-newvision-nv3051d.o
> > > > diff --git a/drivers/gpu/drm/panel/panel-lg-sw43408.c b/drivers/gpu/drm/panel/panel-lg-sw43408.c
> > > > new file mode 100644
> > > > index 000000000000..365d25e14d54
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/panel/panel-lg-sw43408.c
> > > > @@ -0,0 +1,322 @@
> > > > +// SPDX-License-Identifier: GPL-2.0+
> > > > +/*
> > > > + * Copyright (C) 2019-2024 Linaro Ltd
> > > > + * Author: Sumit Semwal <sumit.semwal@...aro.org>
> > > > + * Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> > > > + */
> > > > +
> > > > +#include <linux/backlight.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/gpio/consumer.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/regulator/consumer.h>
> > > > +
> > > > +#include <video/mipi_display.h>
> > > > +
> > > > +#include <drm/drm_mipi_dsi.h>
> > > > +#include <drm/drm_panel.h>
> > > > +#include <drm/drm_probe_helper.h>
> > > > +#include <drm/display/drm_dsc.h>
> > > > +#include <drm/display/drm_dsc_helper.h>
> > > > +
> > > > +#define NUM_SUPPLIES 2
> > > > +
> > > > +struct sw43408_panel {
> > > > + struct drm_panel base;
> > > > + struct mipi_dsi_device *link;
> > > > +
> > > > + const struct drm_display_mode *mode;
> > > > +
> > > > + struct regulator_bulk_data supplies[NUM_SUPPLIES];
> > > > +
> > > > + struct gpio_desc *reset_gpio;
> > > > +};
> > > > +
> > > > +static inline struct sw43408_panel *to_panel_info(struct drm_panel *panel)
> > > > +{
> > > > + return container_of(panel, struct sw43408_panel, base);
> > > > +}
> > > > +
> > > > +static int sw43408_unprepare(struct drm_panel *panel)
> > > > +{
> > > > + struct sw43408_panel *ctx = to_panel_info(panel);
> > > > + int ret;
> > > > +
> > > > + ret = mipi_dsi_dcs_set_display_off(ctx->link);
> > > > + if (ret < 0)
> > > > + dev_err(panel->dev, "set_display_off cmd failed ret = %d\n", ret);
> > > > +
> > > > + ret = mipi_dsi_dcs_enter_sleep_mode(ctx->link);
> > > > + if (ret < 0)
> > > > + dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret);
> > > > +
> > > > + msleep(100);
> > > > +
> > > > + gpiod_set_value(ctx->reset_gpio, 1);
> > > > +
> > > > + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> > > > +}
> > > > +
> > > > +static int sw43408_program(struct drm_panel *panel)
> > > > +{
> > > > + struct sw43408_panel *ctx = to_panel_info(panel);
> > > > + struct drm_dsc_picture_parameter_set pps;
> > > > + u8 dsc_en = 0x11;
> > >
> > > Yeah, this is completely strange. Bit 0, 0x1, is to enable DSC which is
> > > normal. 0x10 however, which is bit 4, selects PPS table 2. Do you ever set
> > > pps_identifier in struct drm_dsc_picture_parameter_set to 2? Or is the table
> > > that you send below bogus and/or not used? Maybe the Driver IC on the other
> > > end of the DSI link has a default PPS table with identifier 2 that works out of
> > > the box?
> >
> > Note, MIPI standard also requires two bytes argument. I suspect that
> > LG didn't fully follow the standard here.
>
> Have you read this command from downstream DTS, or have you tried sending 2
> bytes and seen the panel breaking? The second byte is marked as reserved and
> should be equal to 0; if the Driver IC is okay with sending either 1 or 2 bytes
> I'd strive to stick with the defined length of 2 bytes for this DCS.
>
> Have you played around with the PPS table? What if you change
> drm_dsc_picture_paremeter_set::pps_identifier to the second table, will the
> panel stop working as expected again? This could indicate that the PPS that is
> sent is incorrect (even though the information in the original DSC config was
> enough to set up the DPU and DSI correctly).
>
> According to the DSI spec it is allowed to have a pre-stored/pre-programmed
> PPS table, which could be used here making the current call to
> mipi_dsi_picture_parameter_set() useless and "confusing"?
Ok, some short summary of my tests.
Skipping PPS doesn't work at all, so there is no default.
Adding a second zero byte doesn't seem to change anything. Dropping
the 0x1 bit ('enable') doesn't seem to change anything.
If I send COMPRESSION_MODE before sending the PPS, various combinations work.
If I send COMPRESSION_MODE after sending the PPS, the follow combos work:
pps_identifier = 0x0, COMPRESSION_MODE = 0x11
pps_identifier = 0x1, COMPRESSION_MODE = 0x21
>
> > Basically that's the reason why I went for the _raw function instead
> > of adding PPS and codec arguments to the existing function.
> >
> > >
> > > > + mipi_dsi_dcs_write_seq(ctx->link, MIPI_DCS_SET_GAMMA_CURVE, 0x02);
> > > > +
> > > > + mipi_dsi_dcs_set_tear_on(ctx->link, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> > > > +
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0x53, 0x0c, 0x30);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x00, 0x70, 0xdf, 0x00, 0x70, 0xdf);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xf7, 0x01, 0x49, 0x0c);
> > > > +
> > > > + mipi_dsi_dcs_exit_sleep_mode(ctx->link);
> > > > +
> > > > + msleep(135);
> > > > +
> > > > + mipi_dsi_compression_mode_raw(ctx->link, &dsc_en, 1);
> > >
> > > Even though I think we should change this function to describe the known
> > > bit layout of command 0x7 per the VESA DSI spec, for now replace 1 with
> > > sizeof(dsc_en)?
> >
> > If dsc_en were an array, it would have been a proper thing. Maybe I
> > should change it to the array to remove confusion.
>
> It should work even with a single byte, just to clarify to readers that the 3rd
> argument is the byte-size of the input.
>
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xac);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xe5,
> > > > + 0x00, 0x3a, 0x00, 0x3a, 0x00, 0x0e, 0x10);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xb5,
> > > > + 0x75, 0x60, 0x2d, 0x5d, 0x80, 0x00, 0x0a, 0x0b,
> > > > + 0x00, 0x05, 0x0b, 0x00, 0x80, 0x0d, 0x0e, 0x40,
> > > > + 0x00, 0x0c, 0x00, 0x16, 0x00, 0xb8, 0x00, 0x80,
> > > > + 0x0d, 0x0e, 0x40, 0x00, 0x0c, 0x00, 0x16, 0x00,
> > > > + 0xb8, 0x00, 0x81, 0x00, 0x03, 0x03, 0x03, 0x01,
> > > > + 0x01);
> > > > + msleep(85);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xcd,
> > > > + 0x00, 0x00, 0x00, 0x19, 0x19, 0x19, 0x19, 0x19,
> > > > + 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19,
> > > > + 0x16, 0x16);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xcb, 0x80, 0x5c, 0x07, 0x03, 0x28);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xc0, 0x02, 0x02, 0x0f);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x04, 0x61, 0xdb, 0x04, 0x70, 0xdb);
> > > > + mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xca);
> > > > +
> > > > + mipi_dsi_dcs_set_display_on(ctx->link);
> > >
> > > Any specific reason to not have the (un)blanking sequence in the enable/disable
> > > callbacks and leaving display configuration in (un)prepare?
> >
> > We are back to the question on when it's fine to send the commands. I
> > think the current agreement is to send everything in the
> > prepare/unprepare, because of some strange hosts.
>
> For my panel drivers I'm sticking with having `post-on` commands (from
> downstream) in `enable/disable`, which is typically only `set_display_on`. In
> hopes of proposing a `prepare_atomic()` some time to allow mode selection.
>
> In a short test on recent -next I am once again allowed to send DSI commands in
> both .disable and .unprepare, making both functions a "clean" inverse of .enable
> and .prepare respectively.
The world isn't limited to the MSM hosts.
>
> > > > + msleep(50);
> > > > +
> > > > + ctx->link->mode_flags &= ~MIPI_DSI_MODE_LPM;
> > > > +
> > > > + drm_dsc_pps_payload_pack(&pps, ctx->link->dsc);
> > > > + mipi_dsi_picture_parameter_set(ctx->link, &pps);
> > >
> > > I'm always surprised why this is sent _after_ turning the display on (unblanking
> > > it). Wouldn't that cause unnecessary corruption?
> >
> > No idea. I followed the dowsntream command sequences here. Most likely
> > the panel is not fully on until it receives the full frame to be
> > displayed.
>
> According to the DSI spec a PPS update is allowed to happen every frame, and
> (for cmdmode panels) will take effect after the next TE trigger. Unsure if a TE
> event happens before the first frame, otherwise this may start taking effect
> on the second frame onwards only.
>
> If there's no corruption on the first frame there might be a pre-programmed PPS
> table in slot 2, supporting the theory above.
--
With best wishes
Dmitry
Powered by blists - more mailing lists