| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240401-typec-fix-sm8250-v3-5-604dce3ad103@linaro.org>
Date: Mon, 01 Apr 2024 23:33:44 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH v3 5/9] arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs
to new bindings
To follow other Qualcomm platforms, update QMP USB+DP PHYs to use newer
bindings rather than old bindings which had PHYs as subdevices.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
arch/arm64/boot/dts/qcom/sc8180x.dtsi | 122 ++++++++++++----------------------
1 file changed, 41 insertions(+), 81 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index a086dbe0d910..bae89761dae1 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8180x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@@ -2472,28 +2473,25 @@ usb_sec_hsphy: phy@...3000 {
status = "disabled";
};
- usb_prim_qmpphy: phy@...9000 {
+ usb_prim_qmpphy: phy@...8000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
- reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x38>,
- <0 0x088ea000 0 0x40>;
- reg-names = "reg-base", "dp_com";
+ reg = <0 0x088e8000 0 0x3000>;
+
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux",
- "ref_clk_src",
"ref",
- "com_aux";
+ "com_aux",
+ "usb3_pipe";
+
resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
<&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
reset-names = "phy", "common";
#clock-cells = <1>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #phy-cells = <1>;
status = "disabled";
@@ -2507,59 +2505,38 @@ port@0 {
usb_prim_qmpphy_out: endpoint {};
};
+ port@1 {
+ reg = <1>;
+
+ usb_prim_qmpphy_usb_ss_in: endpoint {};
+ };
+
port@2 {
reg = <2>;
usb_prim_qmpphy_dp_in: endpoint {};
};
};
-
- usb_prim_ssphy: usb3-phy@...9200 {
- reg = <0 0x088e9200 0 0x200>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x218>,
- <0 0x088e9600 0 0x200>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_prim_phy_pipe_clk_src";
- };
-
- usb_prim_dpphy: dp-phy@...a200 {
- reg = <0 0x088ea200 0 0x200>,
- <0 0x088ea400 0 0x200>,
- <0 0x088eaa00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
};
usb_sec_qmpphy: phy@...e000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
- reg = <0 0x088ee000 0 0x18c>,
- <0 0x088ed000 0 0x10>,
- <0 0x088ef000 0 0x40>;
- reg-names = "reg-base", "dp_com";
+ reg = <0 0x088ed000 0 0x3000>;
+
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "aux",
- "ref_clk_src",
"ref",
- "com_aux";
+ "com_aux",
+ "usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";
#clock-cells = <1>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #phy-cells = <1>;
status = "disabled";
@@ -2573,37 +2550,18 @@ port@0 {
usb_sec_qmpphy_out: endpoint {};
};
+ port@1 {
+ reg = <1>;
+
+ usb_sec_qmpphy_usb_ss_in: endpoint {};
+ };
+
port@2 {
reg = <2>;
usb_sec_qmpphy_dp_in: endpoint {};
};
};
-
- usb_sec_ssphy: usb3-phy@...9200 {
- reg = <0 0x088ee200 0 0x200>,
- <0 0x088ee400 0 0x200>,
- <0 0x088eec00 0 0x218>,
- <0 0x088ee600 0 0x200>,
- <0 0x088ee800 0 0x200>,
- <0 0x088eea00 0 0x100>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_sec_phy_pipe_clk_src";
- };
-
- usb_sec_dpphy: dp-phy@...f200 {
- reg = <0 0x088ef200 0 0x200>,
- <0 0x088ef400 0 0x200>,
- <0 0x088efa00 0 0x200>,
- <0 0x088ef600 0 0x200>,
- <0 0x088ef800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- clock-output-names = "qmp_dptx1_phy_pll_link_clk",
- "qmp_dptx1_phy_pll_vco_div_clk";
- };
};
system-cache-controller@...0000 {
@@ -2672,7 +2630,7 @@ usb_prim_dwc3: usb@...0000 {
iommus = <&apps_smmu 0x140 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
+ phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
port {
@@ -2729,7 +2687,7 @@ usb_sec_dwc3: usb@...0000 {
iommus = <&apps_smmu 0x160 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+ phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
port {
@@ -3046,9 +3004,10 @@ mdss_dp0: displayport-controller@...0000 {
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
- assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
+ assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
- phys = <&usb_prim_dpphy>;
+ phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
@@ -3122,9 +3081,10 @@ mdss_dp1: displayport-controller@...8000 {
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
- assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
+ assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
- phys = <&usb_sec_dpphy>;
+ phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
phy-names = "dp";
#sound-dai-cells = <0>;
@@ -3271,12 +3231,12 @@ dispcc: clock-controller@...0000 {
<&mdss_dsi0_phy 1>,
<&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>,
- <&usb_prim_dpphy 0>,
- <&usb_prim_dpphy 1>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
<&edp_phy 0>,
<&edp_phy 1>,
- <&usb_sec_dpphy 0>,
- <&usb_sec_dpphy 1>;
+ <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
--
2.39.2
Powered by blists - more mailing lists