linux-kernel - [PATCH v3 0/5] serial: sc16is7xx: split into core and I2C/SPI parts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240402174353.256627-1-hugo@hugovil.com>
Date: Tue,  2 Apr 2024 13:43:48 -0400
From: Hugo Villeneuve <hugo@...ovil.com>
To: gregkh@...uxfoundation.org,
	jirislaby@...nel.org
Cc: linux-kernel@...r.kernel.org,
	linux-serial@...r.kernel.org,
	hugo@...ovil.com,
	andy.shevchenko@...il.com,
	Hugo Villeneuve <hvilleneuve@...onoff.com>
Subject: [PATCH v3 0/5] serial: sc16is7xx: split into core and I2C/SPI parts

From: Hugo Villeneuve <hvilleneuve@...onoff.com>

Hello,
this patch series splits the SPI/I2C parts for the sc16is7xx driver into
separate source files (and separate I2C/SPI drivers).

These changes are based on suggestions made by Andy Shevchenko
following this discussion:

Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/

The changes are split into multiple patches to facilitate the review process.
In the end, some of them could be merged into a single patch.

I have tested the changes on a custom board with two SC16IS752 DUART over
a SPI interface using a Variscite IMX8MN NANO SOM. The four UARTs are
configured in RS-485 mode.

I did not test the changes on a real SC16is7xx using the I2C interface. But
I slighly modified the driver to be able to simulate an I2C device using
i2c-stub. I was then able to instantiate a virtual I2C device without
disturbing existing connection/communication between real SPI devices on
/dev/ttySC0 and /dev/ttySC2 (using a loopback cable).

Thank you.

Link: [v1] https://lore.kernel.org/lkml/20240206214208.2141067-1-hugo@hugovil.com
      [v2] https://lore.kernel.org/lkml/20240307161828.118495-1-hugo@hugovil.com

Changes for V2:
- Move port_registered[] init before the for loop to prevent bug if
  aborting probe when i = 0
- Since patch f7b487648986 ("lib/find: add atomic find_bit() primitives") has
  been dropped from linux-next/master, rework patch 2 (sc16is7xx_lines)
  without find_and_set_bit.

Changes for V3:
- Simplify sc16is7xx_lines allocation by using the IDA framework

Hugo Villeneuve (5):
  serial: sc16is7xx: unconditionally clear line bit in
    sc16is7xx_remove()
  serial: sc16is7xx: simplify and improve Kconfig help text
  serial: sc16is7xx: split into core and I2C/SPI parts (core)
  serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)
  serial: sc16is7xx: split into core and I2C/SPI parts
    (sc16is7xx_regcfg)

 drivers/tty/serial/Kconfig         |  41 +++--
 drivers/tty/serial/Makefile        |   4 +-
 drivers/tty/serial/sc16is7xx.c     | 255 ++++++-----------------------
 drivers/tty/serial/sc16is7xx.h     |  41 +++++
 drivers/tty/serial/sc16is7xx_i2c.c |  74 +++++++++
 drivers/tty/serial/sc16is7xx_spi.c |  97 +++++++++++
 6 files changed, 288 insertions(+), 224 deletions(-)
 create mode 100644 drivers/tty/serial/sc16is7xx.h
 create mode 100644 drivers/tty/serial/sc16is7xx_i2c.c
 create mode 100644 drivers/tty/serial/sc16is7xx_spi.c


base-commit: 39cd87c4eb2b893354f3b850f916353f2658ae6f
-- 
2.39.2