[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240402193148.62323-8-krzk@kernel.org>
Date: Tue, 2 Apr 2024 21:31:47 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Wei Xu <xuwei5@...ilicon.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 8/9] arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators
Fixed regulators are not part of any MMIO bus, so they should not have
unit addresses. This fixes dtc W=1 warnings:
hi6220-hikey.dts:85.26-92.4: Warning (unit_address_vs_reg): /regulator@0: node has a unit name, but no reg or ranges property
hi6220-hikey.dts:94.27-102.4: Warning (unit_address_vs_reg): /regulator@1: node has a unit name, but no reg or ranges property
hi6220-hikey.dts:104.26-113.4: Warning (unit_address_vs_reg): /regulator@2: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index a2aa17e4dfdf..2d304efe081d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -82,7 +82,7 @@ reboot-mode {
};
};
- reg_sys_5v: regulator@0 {
+ reg_sys_5v: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "SYS_5V";
regulator-min-microvolt = <5000000>;
@@ -91,7 +91,7 @@ reg_sys_5v: regulator@0 {
regulator-always-on;
};
- reg_vdd_3v3: regulator@1 {
+ reg_vdd_3v3: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
@@ -101,7 +101,7 @@ reg_vdd_3v3: regulator@1 {
vin-supply = <®_sys_5v>;
};
- reg_5v_hub: regulator@2 {
+ reg_5v_hub: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "5V_HUB";
regulator-min-microvolt = <5000000>;
--
2.34.1
Powered by blists - more mailing lists