| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240402-b4-dts_dxl_audio-v1-3-d26d25b84a08@nxp.com>
Date: Tue, 02 Apr 2024 17:02:30 -0400
From: Frank Li <Frank.Li@....com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>
Cc: devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Frank Li <Frank.Li@....com>
Subject: [PATCH 3/3] arm64: dts: imx8dxl-evk: add audio nodes
Add audio nodes for imx8dxl-evk boards.
Signed-off-by: Frank Li <Frank.Li@....com>
---
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 234 ++++++++++++++++++++++++++
1 file changed, 234 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 2123d431e0613..ba4cdc3534362 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -125,6 +125,81 @@ mii_select: regulator-4 {
enable-active-high;
regulator-always-on;
};
+
+ bt_sco_codec: bt_sco_codec {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ };
+
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai0>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&bt_sco_codec 1>;
+ };
+ };
+
+ sound-wm8960-1 {
+ compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&wm8960_1>;
+ audio-asrc = <&asrc0>;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+ };
+
+ sound-wm8960-2 {
+ compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960";
+ model = "wm8960-audio-2";
+ audio-cpu = <&sai2>;
+ audio-codec = <&wm8960_2>;
+ capture-only;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+ };
+
+ sound-wm8960-3 {
+ compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960";
+ model = "wm8960-audio-3";
+ audio-cpu = <&sai3>;
+ audio-codec = <&wm8960_3>;
+ capture-only;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+ };
};
&adc0 {
@@ -132,6 +207,11 @@ &adc0 {
status = "okay";
};
+&asrc0 {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
+};
+
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
@@ -259,6 +339,78 @@ max7322: gpio@68 {
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ wm8960_1: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ wm8960_2: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ wm8960_3: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>,
+ <49152000>,
+ <12288000>,
+ <12288000>;
+ };
+ };
+
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
@@ -362,6 +514,53 @@ &lsio_gpio5 {
status = "okay";
};
+&sai0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai0>;
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ status = "okay";
+};
+
+&sai1 {
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ status = "okay";
+};
+
+&sai2 {
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai2_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ fsl,sai-asynchronous;
+ status = "okay";
+};
+
+&sai3 {
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai3_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ fsl,sai-asynchronous;
+ status = "okay";
+};
+
&thermal_zones {
pmic-thermal {
polling-delay-passive = <250>;
@@ -595,6 +794,41 @@ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
+ pinctrl_sai0: sai0grp {
+ fsl,pins = <
+ IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD 0x06000060
+ IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC 0x06000040
+ IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC 0x06000060
+ IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD 0x06000060
+ IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000040
+ IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000040
+ IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000060
+ IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000060
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC 0x06000040
+ IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS 0x06000040
+ IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD 0x06000060
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC 0x06000040
+ IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS 0x06000040
+ IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD 0x06000060
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
--
2.34.1
Powered by blists - more mailing lists