| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <65722a59-2e94-4616-81e1-835615b0e600@hatter.bewilderbeest.net>
Date: Tue, 2 Apr 2024 16:30:37 -0700
From: Zev Weiss <zev@...ilderbeest.net>
To: Andrew Jeffery <andrew@...econstruct.com.au>
Cc: wim@...ux-watchdog.org, linux@...ck-us.net, robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
joel@....id.au, linux-watchdog@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] dt-bindings: watchdog: Convert Aspeed binding to DT
schema
On Tue, Apr 02, 2024 at 05:01:18AM PDT, Andrew Jeffery wrote:
>Squash warnings such as:
>
>```
>arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@...00000/watchdog@...85000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
>```
>
>Signed-off-by: Andrew Jeffery <andrew@...econstruct.com.au>
>---
> .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 130 ++++++++++++++++++
> .../bindings/watchdog/aspeed-wdt.txt | 73 ----------
> 2 files changed, 130 insertions(+), 73 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
> delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
>
>diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
>new file mode 100644
>index 000000000000..10fcb50c4051
>--- /dev/null
>+++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
>@@ -0,0 +1,130 @@
>+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>+%YAML 1.2
>+---
>+$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
>+$schema: http://devicetree.org/meta-schemas/core.yaml#
>+
>+title: Aspeed watchdog timer controllers
>+
>+maintainers:
>+ - Andrew Jeffery <andrew@...econstruct.com.au>
>+
>+properties:
>+ compatible:
>+ enum:
>+ - aspeed,ast2400-wdt
>+ - aspeed,ast2500-wdt
>+ - aspeed,ast2600-wdt
>+
>+ reg:
>+ maxItems: 1
>+
>+ clocks: true
>+
>+ aspeed,reset-type:
>+ enum:
>+ - cpu
>+ - soc
>+ - system
>+ - none
>+ description: |
>+ Reset behaviour - The watchdog can be programmed to generate one of three
>+ different types of reset when a timeout occcurs.
>+
>+ Specifying 'cpu' will only reset the processor on a timeout event.
>+
>+ Specifying 'soc' will reset a configurable subset of the SoC's controllers
Might be worth clarifying that it's configurable only on ast2500 &
ast2600, and which property (aspeed,reset-mask) configures it?
>+ on a timeout event. Controllers critical to the SoC's operation may remain untouched.
>+
>+ Specifying 'system' will reset all controllers on a timeout event, as if EXTRST had been asserted.
>+ Specifying "none" will cause the timeout event to have no reset effect.
Tiny nit: quoting (single vs. double) is slightly inconsistent between
values here.
>+ Another watchdog engine on the chip must be used for chip reset operations.
>+
>+ The default reset type is "system"
>+
>+ aspeed,alt-boot:
>+ $ref: /schemas/types.yaml#/definitions/flag
>+ description: |
>+ Direct the watchdog to configure the SoC to boot from the alternative boot
>+ region if a timeout occurs.
>+
>+ aspeed,external-signal:
>+ $ref: /schemas/types.yaml#/definitions/flag
>+ description: |
>+ Assert the timeout event on an external signal pin associated with the
>+ watchdog controller instance. The pin must be muxed appropriately.
>+
>+ aspeed,ext-pulse-duration:
>+ $ref: /schemas/types.yaml#/definitions/uint32
>+ description: |
>+ The duration, in microseconds, of the pulse emitted on the external signal pin
>+
>+ aspeed,ext-push-pull:
>+ $ref: /schemas/types.yaml#/definitions/flag
>+ description: |
>+ If aspeed,external-signal is specified in the node, set the external
>+ signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
>+ specified then the pin is configured as open-drain.
>+
>+ aspeed,ext-active-high:
>+ $ref: /schemas/types.yaml#/definitions/flag
>+ description: |
>+ If both aspeed,external-signal and aspeed,ext-push-pull are specified in
>+ the node, set the pulse polarity to active-high. If aspeed,ext-active-high
>+ is not specified then the pin is configured as active-low.
>+
>+ aspeed,reset-mask:
>+ $ref: /schemas/types.yaml#/definitions/uint32-array
>+ minItems: 1
>+ maxItems: 2
>+ description: |
>+ A bitmaks indicating which peripherals will be reset if the watchdog
Typo: "bitmask"
>+ timer expires. On AST2500 SoCs this should be a single word defined using
>+ the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
>+ array with the first word defined using the AST2600_WDT_RESET1_* macros,
>+ and the second word defined using the AST2600_WDT_RESET2_* macros.
>+
>+required:
>+ - compatible
>+ - reg
>+
>+allOf:
>+ - if:
>+ anyOf:
>+ - required:
>+ - aspeed,ext-push-pull
>+ - required:
>+ - aspeed,ext-active-high
>+ - required:
>+ - aspeed,reset-mask
>+ then:
>+ properties:
>+ compatible:
>+ enum:
>+ - aspeed,ast2500-wdt
>+ - aspeed,ast2600-wdt
>+ - if:
>+ required:
>+ - aspeed,ext-active-high
>+ then:
>+ required:
>+ - aspeed,ext-push-pull
>+
>+additionalProperties: false
>+
>+examples:
>+ - |
>+ wdt1: watchdog@...85000 {
>+ compatible = "aspeed,ast2400-wdt";
>+ reg = <0x1e785000 0x1c>;
>+ aspeed,reset-type = "system";
>+ aspeed,external-signal;
>+ };
>+ - |
>+ #include <dt-bindings/watchdog/aspeed-wdt.h>
>+ wdt2: watchdog@...85040 {
>+ compatible = "aspeed,ast2600-wdt";
>+ reg = <0x1e785040 0x40>;
>+ aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
>+ (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
>+ };
>diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
>deleted file mode 100644
>index 3208adb3e52e..000000000000
>--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
>+++ /dev/null
>@@ -1,73 +0,0 @@
>-Aspeed Watchdog Timer
>-
>-Required properties:
>- - compatible: must be one of:
>- - "aspeed,ast2400-wdt"
>- - "aspeed,ast2500-wdt"
>- - "aspeed,ast2600-wdt"
>-
>- - reg: physical base address of the controller and length of memory mapped
>- region
>-
>-Optional properties:
>-
>- - aspeed,reset-type = "cpu|soc|system|none"
>-
>- Reset behavior - Whenever a timeout occurs the watchdog can be programmed
>- to generate one of three different, mutually exclusive, types of resets.
>-
>- Type "none" can be specified to indicate that no resets are to be done.
>- This is useful in situations where another watchdog engine on chip is
>- to perform the reset.
>-
>- If 'aspeed,reset-type=' is not specified the default is to enable system
>- reset.
>-
>- Reset types:
>-
>- - cpu: Reset CPU on watchdog timeout
>-
>- - soc: Reset 'System on Chip' on watchdog timeout
>-
>- - system: Reset system on watchdog timeout
>-
>- - none: No reset is performed on timeout. Assumes another watchdog
>- engine is responsible for this.
>-
>- - aspeed,alt-boot: If property is present then boot from alternate block.
>- - aspeed,external-signal: If property is present then signal is sent to
>- external reset counter (only WDT1 and WDT2). If not
>- specified no external signal is sent.
>- - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
>-
>-Optional properties for AST2500-compatible watchdogs:
>- - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
>- drive type to push-pull. The default is open-drain.
>- - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
>- is configured as push-pull, then set the pulse
>- polarity to active-high. The default is active-low.
>-
>-Optional properties for AST2500- and AST2600-compatible watchdogs:
>- - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
>- the watchdog timer expires. On AST2500 this should be a
>- single word defined using the AST2500_WDT_RESET_* macros;
>- on AST2600 this should be a two-word array with the first
>- word defined using the AST2600_WDT_RESET1_* macros and the
>- second word defined using the AST2600_WDT_RESET2_* macros.
>-
>-Examples:
>-
>- wdt1: watchdog@...85000 {
>- compatible = "aspeed,ast2400-wdt";
>- reg = <0x1e785000 0x1c>;
>- aspeed,reset-type = "system";
>- aspeed,external-signal;
>- };
>-
>- #include <dt-bindings/watchdog/aspeed-wdt.h>
>- wdt2: watchdog@...85040 {
>- compatible = "aspeed,ast2600-wdt";
>- reg = <0x1e785040 0x40>;
>- aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
>- (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
>- };
>--
>2.39.2
>
Powered by blists - more mailing lists