[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240402071213.11671-13-bastien.curutchet@bootlin.com>
Date: Tue, 2 Apr 2024 09:12:12 +0200
From: Bastien Curutchet <bastien.curutchet@...tlin.com>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Peter Ujfalusi <peter.ujfalusi@...il.com>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>,
Bastien Curutchet <bastien.curutchet@...tlin.com>
Cc: linux-sound@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
herve.codina@...tlin.com,
christophercordahi@...ometrics.ca
Subject: [PATCH v2 12/13] ASoC: dt-bindings: davinci-mcbsp: Add the 'ti,T1-framing-{rx/tx}' flags
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is
used for DSP_B format, 1 for DSP_A format. A data delay of 2 bit clock
periods can be used to interface to 'T1 framing' devices where data
stream is preceded by a 'framing bit'. This 2 bit clock data delay is
not described in the bindings.
Add two flags 'ti,T1-framing-[rx/tx]' to enable a data delay of 2
bit clock periods in reception or transmission.
Signed-off-by: Bastien Curutchet <bastien.curutchet@...tlin.com>
---
.../devicetree/bindings/sound/davinci-mcbsp.yaml | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
index 0c2b1936c6a1..4fa677023827 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.yaml
@@ -67,6 +67,20 @@ properties:
"#sound-dai-cells":
const: 0
+ ti,T1-framing-tx:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If the property is present, tx data delay is set to 2 bit clock periods.
+ McBSP will insert a blank period (high-impedance period) before the first
+ data bit. This can be used to interface to T1-framing devices.
+
+ ti,T1-framing-rx:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ If the property is present, rx data delay is set to 2 bit clock periods.
+ McBSP will discard the bit preceding the data stream (called framing bit).
+ This can be used to interface to T1-framing devices.
+
required:
- "#sound-dai-cells"
- compatible
--
2.44.0
Powered by blists - more mailing lists