linux-kernel - [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240402102741.128424-1-quic_msavaliy@quicinc.com>
Date: Tue,  2 Apr 2024 15:57:41 +0530
From: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
To: konrad.dybcio@...aro.org, andersson@...nel.org, andi.shyti@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-i2c@...r.kernel.org
Cc: quic_vdadhani@...cinc.com, vkoul@...nel.org,
        Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Subject: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage

pm_runtime_get_sync() function fails during PM early resume and returning
-EACCES because runtime PM for the device is disabled at the early stage
causing i2c transfer to fail. Make changes to serve transfer with force
resume.

1. Register interrupt with IRQF_EARLY_RESUME and IRQF_NO_SUSPEND flags
   to avoid timeout of transfer when IRQ is not enabled during early stage.
2. Do force resume if pm_runtime_get_sync() is failing after system
   suspend when runtime PM is not enabled.
3. Increment power usage count after forced resume to balance
   it against regular runtime suspend.

Co-developed-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
---
v1 -> v2:
- Changed gi2c->se.dev to dev during dev_dbg() calls.
- Addressed review comments from Andi.
---
 drivers/i2c/busses/i2c-qcom-geni.c | 55 ++++++++++++++++++++++++------
 1 file changed, 45 insertions(+), 10 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index da94df466e83..30c335b02ac4 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -134,6 +134,8 @@ struct geni_i2c_clk_fld {
 	u8	t_cycle_cnt;
 };
 
+static int geni_i2c_runtime_resume(struct device *dev);
+
 /*
  * Hardware uses the underlying formula to calculate time periods of
  * SCL clock cycle. Firmware uses some additional cycles excluded from the
@@ -677,22 +679,48 @@ static int geni_i2c_fifo_xfer(struct geni_i2c_dev *gi2c,
 	return num;
 }
 
+static int geni_i2c_force_resume(struct geni_i2c_dev *gi2c)
+{
+	struct device *dev = gi2c->se.dev;
+	int ret;
+
+	ret = geni_i2c_runtime_resume(dev);
+	if (ret) {
+		dev_err(gi2c->se.dev, "Error turning SE resources:%d\n", ret);
+		pm_runtime_put_noidle(dev);
+		pm_runtime_set_suspended(dev);
+		return ret;
+	}
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	return ret;
+}
+
 static int geni_i2c_xfer(struct i2c_adapter *adap,
 			 struct i2c_msg msgs[],
 			 int num)
 {
 	struct geni_i2c_dev *gi2c = i2c_get_adapdata(adap);
+	struct device *dev = gi2c->se.dev;
 	int ret;
 
 	gi2c->err = 0;
 	reinit_completion(&gi2c->done);
-	ret = pm_runtime_get_sync(gi2c->se.dev);
-	if (ret < 0) {
-		dev_err(gi2c->se.dev, "error turning SE resources:%d\n", ret);
-		pm_runtime_put_noidle(gi2c->se.dev);
-		/* Set device in suspended since resume failed */
-		pm_runtime_set_suspended(gi2c->se.dev);
-		return ret;
+
+	if (!pm_runtime_enabled(dev) && gi2c->suspended) {
+		dev_dbg(dev, "RT_PM disabled, Do force resume, pm_usage_count: %d\n",
+			atomic_read(&dev->power.usage_count));
+		ret = geni_i2c_force_resume(gi2c);
+		if (ret)
+			return ret;
+	} else {
+		ret = pm_runtime_get_sync(dev);
+		if (ret == -EACCES && gi2c->suspended) {
+			dev_dbg(dev, "PM get_sync() failed-%d, force resume\n", ret);
+			ret = geni_i2c_force_resume(gi2c);
+			if (ret)
+				return ret;
+		}
 	}
 
 	qcom_geni_i2c_conf(gi2c);
@@ -702,8 +730,15 @@ static int geni_i2c_xfer(struct i2c_adapter *adap,
 	else
 		ret = geni_i2c_fifo_xfer(gi2c, msgs, num);
 
-	pm_runtime_mark_last_busy(gi2c->se.dev);
-	pm_runtime_put_autosuspend(gi2c->se.dev);
+	if (!pm_runtime_enabled(dev) && !gi2c->suspended) {
+		pm_runtime_put_noidle(dev);
+		pm_runtime_set_suspended(dev);
+		gi2c->suspended = 0;
+	} else {
+		pm_runtime_mark_last_busy(gi2c->se.dev);
+		pm_runtime_put_autosuspend(gi2c->se.dev);
+	}
+
 	gi2c->cur = NULL;
 	gi2c->err = 0;
 	return ret;
@@ -820,7 +855,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	init_completion(&gi2c->done);
 	spin_lock_init(&gi2c->lock);
 	platform_set_drvdata(pdev, gi2c);
-	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
+	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, IRQF_EARLY_RESUME | IRQF_NO_SUSPEND,
 			       dev_name(dev), gi2c);
 	if (ret) {
 		dev_err(dev, "Request_irq failed:%d: err:%d\n",
-- 
2.25.1