[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFpHuLsYg4=gs_d++u1bSvuAW7uY56kCciTNmD1VBp2AkA@mail.gmail.com>
Date: Tue, 2 Apr 2024 12:33:42 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Ben Chuang <benchuanggli@...il.com>
Cc: Bjorn Helgaas <helgaas@...nel.org>, Adrian Hunter <adrian.hunter@...el.com>,
Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>,
Kai-Heng Feng <kai.heng.geng@...onical.com>, Sven van Ashbrook <svenva@...omium.org>,
Stanislaw Kardach <skardach@...gle.com>, Brian Norris <briannorris@...omium.org>,
Jason Lai <jasonlai.genesyslogic@...il.com>, Renius Chen <reniuschengl@...il.com>,
linux-pci@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>
Subject: Re: [PATCH 2/2] mmc: sdhci-pci-gli: Use pci_set_power_state(), not
direct PMCSR writes
On Thu, 28 Mar 2024 at 02:01, Ben Chuang <benchuanggli@...il.com> wrote:
>
> On Thu, Mar 28, 2024 at 5:49 AM Bjorn Helgaas <helgaas@...nel.org> wrote:
> >
> > From: Bjorn Helgaas <bhelgaas@...gle.com>
> >
> > d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter
> > ASPM L1.2") and 36ed2fd32b2c ("mmc: sdhci-pci-gli: A workaround to allow
> > GL9755 to enter ASPM L1.2") added writes to the Control register in the
> > Power Management Capability to put the device in D3hot and back to D0.
> >
> > Use the pci_set_power_state() interface instead because these are generic
> > operations that don't need to be driver-specific. Also, the PCI spec
> > requires some delays after these power transitions, and
> > pci_set_power_state() takes care of those, while d7133797e9e1 and
> > 36ed2fd32b2c did not.
> >
> > Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
>
> Hi Bjorn,
>
> Thanks. It looks better than the vendor specific.
>
> Best regards,
> Ben Chuang
Hi Ben,
I assume I can consider your reply as a reviewed-by tag. If not,
please let me know.
Kind regards
Uffe
>
> > ---
> > drivers/mmc/host/sdhci-pci-gli.c | 20 ++++----------------
> > 1 file changed, 4 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index 3d5543581537..0f81586a19df 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -25,9 +25,6 @@
> > #define GLI_9750_WT_EN_ON 0x1
> > #define GLI_9750_WT_EN_OFF 0x0
> >
> > -#define PCI_GLI_9750_PM_CTRL 0xFC
> > -#define PCI_GLI_9750_PM_STATE GENMASK(1, 0)
> > -
> > #define SDHCI_GLI_9750_CFG2 0x848
> > #define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24)
> > #define GLI_9750_CFG2_L1DLY_VALUE 0x1F
> > @@ -149,9 +146,6 @@
> > #define PCI_GLI_9755_MISC 0x78
> > #define PCI_GLI_9755_MISC_SSC_OFF BIT(26)
> >
> > -#define PCI_GLI_9755_PM_CTRL 0xFC
> > -#define PCI_GLI_9755_PM_STATE GENMASK(1, 0)
> > -
> > #define SDHCI_GLI_9767_GM_BURST_SIZE 0x510
> > #define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8)
> >
> > @@ -556,11 +550,8 @@ static void gl9750_hw_setting(struct sdhci_host *host)
> > sdhci_writel(host, value, SDHCI_GLI_9750_CFG2);
> >
> > /* toggle PM state to allow GL9750 to enter ASPM L1.2 */
> > - pci_read_config_dword(pdev, PCI_GLI_9750_PM_CTRL, &value);
> > - value |= PCI_GLI_9750_PM_STATE;
> > - pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> > - value &= ~PCI_GLI_9750_PM_STATE;
> > - pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
> > + pci_set_power_state(pdev, PCI_D3hot);
> > + pci_set_power_state(pdev, PCI_D0);
> >
> > /* mask the replay timer timeout of AER */
> > aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> > @@ -774,11 +765,8 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
> > pci_write_config_dword(pdev, PCI_GLI_9755_CFG2, value);
> >
> > /* toggle PM state to allow GL9755 to enter ASPM L1.2 */
> > - pci_read_config_dword(pdev, PCI_GLI_9755_PM_CTRL, &value);
> > - value |= PCI_GLI_9755_PM_STATE;
> > - pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
> > - value &= ~PCI_GLI_9755_PM_STATE;
> > - pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
> > + pci_set_power_state(pdev, PCI_D3hot);
> > + pci_set_power_state(pdev, PCI_D0);
> >
> > /* mask the replay timer timeout of AER */
> > aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
> > --
> > 2.34.1
> >
> >
Powered by blists - more mailing lists