[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <71426f4c-a44a-cf87-7045-b3f2b3fc240e@linux.intel.com>
Date: Tue, 2 Apr 2024 14:01:15 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: "Luke D. Jones" <luke@...nes.dev>
cc: Hans de Goede <hdegoede@...hat.com>, corentin.chary@...il.com,
platform-driver-x86@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 8/9] platform/x86: asus-wmi: Add support for MCU
powersave
On Tue, 2 Apr 2024, Luke D. Jones wrote:
> Add support for an MCU powersave WMI call. This is intended to set the
> MCU in to a low-power mode when sleeping. This mode can cut sleep power
> use by around half.
>
> Signed-off-by: Luke D. Jones <luke@...nes.dev>
Hi,
I fail to follow the logic of the patch here. This patch makes it
configurable which is not bad in itself but what is the reason why a user
would not always want to cut sleep power usage down? So this sounds like a
feature that the user wants always enabled if available.
So what are the downsides of enabling it if it's supported?
--
i.
> ---
> .../ABI/testing/sysfs-platform-asus-wmi | 11 +++-
> drivers/platform/x86/asus-wmi.c | 50 +++++++++++++++++++
> 2 files changed, 60 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
> index 41b92e53e88a..28144371a0f1 100644
> --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
> +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
> @@ -202,4 +202,13 @@ Contact: "Luke Jones" <luke@...nes.dev>
> Description:
> Set if the BIOS POST sound is played on boot.
> * 0 - False,
> - * 1 - True
> \ No newline at end of file
> + * 1 - True
> +
> +What: /sys/devices/platform/<platform>/mcu_powersave
> +Date: Apr 2024
> +KernelVersion: 6.10
> +Contact: "Luke Jones" <luke@...nes.dev>
> +Description:
> + Set if the MCU can go in to low-power mode on system sleep
> + * 0 - False,
> + * 1 - True
> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
> index ddf568ef8c5e..cf872eed0986 100644
> --- a/drivers/platform/x86/asus-wmi.c
> +++ b/drivers/platform/x86/asus-wmi.c
> @@ -1292,6 +1292,53 @@ static ssize_t nv_temp_target_show(struct device *dev,
> }
> static DEVICE_ATTR_RW(nv_temp_target);
>
> +/* Ally MCU Powersave ********************************************************/
> +static ssize_t mcu_powersave_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> + int result;
> +
> + result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_MCU_POWERSAVE);
> + if (result < 0)
> + return result;
> +
> + return sysfs_emit(buf, "%d\n", result);
> +}
> +
> +static ssize_t mcu_powersave_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + int result, err;
> + u32 enable;
> +
> + struct asus_wmi *asus = dev_get_drvdata(dev);
> +
> + result = kstrtou32(buf, 10, &enable);
> + if (result)
> + return result;
> +
> + if (enable > 1)
> + return -EINVAL;
> +
> + err = asus_wmi_set_devstate(ASUS_WMI_DEVID_MCU_POWERSAVE, enable, &result);
> + if (err) {
> + pr_warn("Failed to set MCU powersave: %d\n", err);
> + return err;
> + }
> +
> + if (result > 1) {
> + pr_warn("Failed to set MCU powersave (result): 0x%x\n", result);
> + return -EIO;
> + }
> +
> + sysfs_notify(&asus->platform_device->dev.kobj, NULL, "mcu_powersave");
> +
> + return count;
> +}
> +static DEVICE_ATTR_RW(mcu_powersave);
> +
> /* Battery ********************************************************************/
>
> /* The battery maximum charging percentage */
> @@ -4299,6 +4346,7 @@ static struct attribute *platform_attributes[] = {
> &dev_attr_ppt_platform_sppt.attr,
> &dev_attr_nv_dynamic_boost.attr,
> &dev_attr_nv_temp_target.attr,
> + &dev_attr_mcu_powersave.attr,
> &dev_attr_boot_sound.attr,
> &dev_attr_panel_od.attr,
> &dev_attr_mini_led_mode.attr,
> @@ -4352,6 +4400,8 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
> devid = ASUS_WMI_DEVID_NV_DYN_BOOST;
> else if (attr == &dev_attr_nv_temp_target.attr)
> devid = ASUS_WMI_DEVID_NV_THERM_TARGET;
> + else if (attr == &dev_attr_mcu_powersave.attr)
> + devid = ASUS_WMI_DEVID_MCU_POWERSAVE;
> else if (attr == &dev_attr_boot_sound.attr)
> devid = ASUS_WMI_DEVID_BOOT_SOUND;
> else if (attr == &dev_attr_panel_od.attr)
>
Powered by blists - more mailing lists