| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<NTZPR01MB09560C9610FAE985884537C19F3DA@NTZPR01MB0956.CHNPR01.prod.partner.outlook.cn>
Date: Wed, 3 Apr 2024 07:24:39 +0000
From: Xingyu Wu <xingyu.wu@...rfivetech.com>
To: Bo Gan <ganboing@...il.com>, Krzysztof Kozlowski <krzk@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>,
Conor Dooley <conor@...nel.org>, Emil Renner Berthing
<emil.renner.berthing@...onical.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
CC: Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt
<palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>, Hal Feng
<hal.feng@...rfivetech.com>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-clk@...r.kernel.org"
<linux-clk@...r.kernel.org>, "linux-riscv@...ts.infradead.org"
<linux-riscv@...ts.infradead.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>
Subject: RE: [PATCH v3] clk: starfive: pll: Fix lower rate of CPUfreq by
setting PLL0 rate to 1.5GHz
> -----Original Message-----
> From: Bo Gan <ganboing@...il.com>
> Sent: 2024年4月3日 8:27
> To: Krzysztof Kozlowski <krzk@...nel.org>; Xingyu Wu
> <xingyu.wu@...rfivetech.com>; Michael Turquette
> <mturquette@...libre.com>; Stephen Boyd <sboyd@...nel.org>; Conor Dooley
> <conor@...nel.org>; Emil Renner Berthing
> <emil.renner.berthing@...onical.com>; Rob Herring <robh@...nel.org>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
> Cc: Paul Walmsley <paul.walmsley@...ive.com>; Palmer Dabbelt
> <palmer@...belt.com>; Albert Ou <aou@...s.berkeley.edu>; Hal Feng
> <hal.feng@...rfivetech.com>; linux-kernel@...r.kernel.org; linux-
> clk@...r.kernel.org; linux-riscv@...ts.infradead.org; devicetree@...r.kernel.org
> Subject: Re: [PATCH v3] clk: starfive: pll: Fix lower rate of CPUfreq by setting PLL0
> rate to 1.5GHz
>
> On 4/2/24 9:18 AM, Krzysztof Kozlowski wrote:
> > On 02/04/2024 11:09, Xingyu Wu wrote:
> >> CPUfreq supports 4 cpu frequency loads on 375/500/750/1500MHz.
> >> But now PLL0 rate is 1GHz and the cpu frequency loads become
> >> 333/500/500/1000MHz in fact.
> >>
> >> So PLL0 rate should be default set to 1.5GHz. But setting the
> >> PLL0 rate need certain steps:
> >>
> >> 1. Change the parent of cpu_root clock to OSC clock.
> >> 2. Change the divider of cpu_core if PLL0 rate is higher than
> >> 1.25GHz before CPUfreq boot.
> >> 3. Change the parent of cpu_root clock back to PLL0 clock.
> >>
> >> Reviewed-by: Hal Feng <hal.feng@...rfivetech.com>
> >> Fixes: e2c510d6d630 ("riscv: dts: starfive: Add cpu scaling for
> >> JH7110 SoC")
> >> Signed-off-by: Xingyu Wu <xingyu.wu@...rfivetech.com>
> >> ---
> >>
> >> Hi Stephen and Emil,
> >>
> >> This patch fixes the issue about lower rate of CPUfreq[1] by setting
> >> PLL0 rate to 1.5GHz.
> >>
> >> In order not to affect the cpu operation, setting the PLL0 rate need
> >> certain steps. The cpu_root's parent clock should be changed first.
> >> And the divider of the cpu_core clock should be set to 2 so they
> >> won't crash when setting 1.5GHz without voltage regulation. Due to
> >> PLL driver boot earlier than SYSCRG driver, cpu_core and cpu_root
> >> clocks are using by ioremap().
> >>
> >> [1]: https://github.com/starfive-tech/VisionFive2/issues/55
> >>
> >> Previous patch link:
> >> v2:
> >> https://lore.kernel.org/all/20230821152915.208366-1-xingyu.wu@starfiv
> >> etech.com/
> >> v1:
> >> https://lore.kernel.org/all/20230811033631.160912-1-xingyu.wu@starfiv
> >> etech.com/
> >>
> >> Thanks,
> >> Xingyu Wu
> >> ---
> >> .../jh7110-starfive-visionfive-2.dtsi | 5 +
> >> .../clk/starfive/clk-starfive-jh7110-pll.c | 102 ++++++++++++++++++
> >
> > Please do not mix DTS and driver code. That's not really portable. DTS
> > is being exported and used in other projects.
> >
> > ...
> >
> >>
> >> @@ -458,6 +535,8 @@ static int jh7110_pll_probe(struct platform_device
> *pdev)
> >> struct jh7110_pll_priv *priv;
> >> unsigned int idx;
> >> int ret;
> >> + struct device_node *np;
> >> + struct resource res;
> >>
> >> priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> >> if (!priv)
> >> @@ -489,6 +568,29 @@ static int jh7110_pll_probe(struct platform_device
> *pdev)
> >> return ret;
> >> }
> >>
> >> + priv->is_first_set = true;
> >> + np = of_find_compatible_node(NULL, NULL, "starfive,jh7110-syscrg");
> >
> > Your drivers should not do it. It's fragile, hides true link/dependency.
> > Please use phandles.
> >
> >
> >> + if (!np) {
> >> + ret = PTR_ERR(np);
> >> + dev_err(priv->dev, "failed to get syscrg node\n");
> >> + goto np_put;
> >> + }
> >> +
> >> + ret = of_address_to_resource(np, 0, &res);
> >> + if (ret) {
> >> + dev_err(priv->dev, "failed to get syscrg resource\n");
> >> + goto np_put;
> >> + }
> >> +
> >> + priv->syscrg_base = ioremap(res.start, resource_size(&res));
> >> + if (!priv->syscrg_base)
> >> + ret = -ENOMEM;
> >
> > Why are you mapping other device's IO? How are you going to ensure
> > synced access to registers?
> >
> >
> >
> > Best regards,
> > Krzysztof
> >
> >
> > _______________________________________________
> > linux-riscv mailing list
> > linux-riscv@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-riscv
> >
>
> Hi Xingyu,
>
> Echoing Krzysztof's point. This piece code seems wrong to me. This logic belongs
> to syscrg, rather than pll. Why don't you do the pll0->osc->pll0 switching from
> syscrg side during probing?
>
> Bo
Yes, That's what I thought and I did it in previous patches. But Emil seemed to like
to put the steps into the clk_set_rate() when setting PLL0 rate[1]. So I tried to use
this way in this patch.
[1]: https://lore.kernel.org/all/CAJM55Z-gYpn_FjG2Zb__Nt=rbrNQN8QDNB=KEFdeVkz9Ptv72Q@mail.gmail.com/
Best regards,
Xingyu Wu
Powered by blists - more mailing lists