[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <35e566-660d2080-1-7eb9eb00@16488675>
Date: Wed, 03 Apr 2024 10:24:31 +0100
From: "Shreeya Patel" <shreeya.patel@...labora.com>
To: mchehab@...nel.org, hverkuil@...all.nl, hverkuil-cisco@...all.nl
Cc: heiko@...ech.de, robh@...nel.org, krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, mturquette@...libre.com, sboyd@...nel.org, p.zabel@...gutronix.de, shawn.wen@...k-chips.com, kernel@...labora.com, linux-kernel@...r.kernel.org, linux-media@...r.kernel.org, devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org, linux-clk@...r.kernel.org, linux-arm@...ts.infradead.org
Subject: Re: [PATCH v3 0/6] Add Synopsys DesignWare HDMI RX Controller
On Thursday, March 28, 2024 04:20 IST, Shreeya Patel <shreeya.patel@...labora.com> wrote:
> This series implements support for the Synopsys DesignWare
> HDMI RX Controller, being compliant with standard HDMI 1.4b
> and HDMI 2.0.
>
Hi Mauro and Hans,
I haven't received any reviews so far. Hence, this is just a gentle reminder to review this patch series.
Thanks,
Shreeya Patel
> Features that are currently supported by the HDMI RX driver
> have been tested on rock5b board using a HDMI to micro-HDMI cable.
> It is recommended to use a good quality cable as there were
> multiple issues seen during testing the driver.
>
> Please note the below information :-
> * While testing the driver on rock5b we noticed that the binary BL31
> from Rockchip contains some unknown code to get the HDMI-RX PHY
> access working. With TF-A BL31, the HDMI-RX PHY doesn't work as
> expected since there are no interrupts seen for rk_hdmirx-hdmi
> leading to some failures in the driver [0].
> * We have tested the working of OBS studio with HDMIRX driver and
> there were no issues seen.
> * We also tested and verified the support for interlaced video.
>
> [0] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/trusted-firmware-a/-/issues/1
>
> To test the HDMI RX Controller driver, following example commands can be used :-
>
> root@...ian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \
> --set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \
> --stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll
>
> root@...ian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
> -s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv
>
>
> Following is the v4l2-compliance test result :-
>
> root@...ian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0
> v4l2-compliance 1.27.0-5174, 64 bits, 64-bit time_t
> v4l2-compliance SHA: d700deb14368 2024-01-18 12:19:05
>
> Compliance test for snps_hdmirx device /dev/video0:
>
> Driver Info:
> Driver name : snps_hdmirx
> Card type : snps_hdmirx
> Bus info : platform: snps_hdmirx
> Driver version : 6.8.0
> Capabilities : 0x84201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
> test VIDIOC_DV_TIMINGS_CAP: OK
> test VIDIOC_G/S_EDID: OK
>
> Control ioctls (Input 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 2 Private Controls: 0
>
> Format ioctls (Input 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Input 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Input 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Total for snps_hdmirx device /dev/video0: 46, Succeeded: 46, Failed: 0, Warnings: 0
>
> Changes in v3 :-
> - Use v4l2-common helpers in the HDMIRX driver
> - Rename cma node and phandle names
> - Elaborate the comment to explain 160MiB calculation
> - Move &hdmi_receiver_cma to the rock5b dts file
> - Add information about interlaced video testing in the
> cover-letter
>
> Changes in v2 :-
> - Fix checkpatch --strict warnings
> - Move the dt-binding include file changes in a separate patch
> - Add a description for the hardware in the dt-bindings file
> - Rename resets, vo1 grf and HPD properties
> - Add a proper description for grf and vo1-grf phandles in the
> bindings
> - Rename the HDMI RX node name to hdmi-receiver
> - Include gpio header file in binding example to fix the
> dt_binding_check failure
> - Move hdmirx_cma node to the rk3588.dtsi file
> - Add an entry to MAINTAINERS file for the HDMIRX driver
>
> Shreeya Patel (6):
> dt-bindings: reset: Define reset id used for HDMI Receiver
> clk: rockchip: rst-rk3588: Add reset line for HDMI Receiver
> dt-bindings: media: Document HDMI RX Controller
> arm64: dts: rockchip: Add device tree support for HDMI RX Controller
> media: platform: synopsys: Add support for hdmi input driver
> MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
>
> .../bindings/media/snps,dw-hdmi-rx.yaml | 132 +
> MAINTAINERS | 8 +
> .../boot/dts/rockchip/rk3588-pinctrl.dtsi | 41 +
> .../boot/dts/rockchip/rk3588-rock-5b.dts | 19 +
> arch/arm64/boot/dts/rockchip/rk3588.dtsi | 56 +
> drivers/clk/rockchip/rst-rk3588.c | 1 +
> drivers/media/platform/Kconfig | 1 +
> drivers/media/platform/Makefile | 1 +
> drivers/media/platform/synopsys/Kconfig | 3 +
> drivers/media/platform/synopsys/Makefile | 2 +
> .../media/platform/synopsys/hdmirx/Kconfig | 18 +
> .../media/platform/synopsys/hdmirx/Makefile | 4 +
> .../platform/synopsys/hdmirx/snps_hdmirx.c | 2726 +++++++++++++++++
> .../platform/synopsys/hdmirx/snps_hdmirx.h | 394 +++
> .../synopsys/hdmirx/snps_hdmirx_cec.c | 289 ++
> .../synopsys/hdmirx/snps_hdmirx_cec.h | 46 +
> .../dt-bindings/reset/rockchip,rk3588-cru.h | 2 +
> 17 files changed, 3743 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> create mode 100644 drivers/media/platform/synopsys/Kconfig
> create mode 100644 drivers/media/platform/synopsys/Makefile
> create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
> create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
> create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
> create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
> create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
> create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
>
> --
> 2.39.2
>
> _______________________________________________
> Kernel mailing list -- kernel@...lman.collabora.com
> To unsubscribe send an email to kernel-leave@...lman.collabora.com
> This list is managed by https://mailman.collabora.com
Powered by blists - more mailing lists