[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 4 Apr 2024 07:44:37 +0200
From: Wadim Egorov <w.egorov@...tec.de>
To: Nathan Morrisson <nmorrisson@...tec.com>, <nm@...com>, <vigneshr@...com>,
<kristo@...nel.org>, <robh@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <upstream@...ts.phytec.de>
Subject: Re: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk:
Increase CAN max bitrate
Am 02.04.24 um 18:08 schrieb Nathan Morrisson:
> The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which
> support CAN FD at 8 Mbps.
>
> Increase the maximum bitrate to 8 Mbps.
>
> Signed-off-by: Nathan Morrisson <nmorrisson@...tec.com>
For both patches
Reviewed-by: Wadim Egorov <w.egorov@...tec.de>
> ---
> arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> index 8237b8c815b8..522699ec65e8 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> @@ -42,7 +42,7 @@ can_tc1: can-phy0 {
> pinctrl-names = "default";
> pinctrl-0 = <&can_tc1_pins_default>;
> #phy-cells = <0>;
> - max-bitrate = <5000000>;
> + max-bitrate = <8000000>;
> standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
> };
>
> @@ -51,7 +51,7 @@ can_tc2: can-phy1 {
> pinctrl-names = "default";
> pinctrl-0 = <&can_tc2_pins_default>;
> #phy-cells = <0>;
> - max-bitrate = <5000000>;
> + max-bitrate = <8000000>;
> standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
> };
>
Powered by blists - more mailing lists